Hydra Hydra Tool v2023.1.6.1 [07/01/2023] All in One Exe and New User Interface Update !
- Thread starter Rashi Hydra Tool
- Start date
Hydra Tool
VIVO Y66 imei repair no successful fail...Hydra Tool v2023.1.6.1 All in One Exe and New User Interface Update !
We are glad to announce the release of the new all in one Exe.
While this new User Interface is in development phase user can test it and post back with the feedbacks on what can be improved more.
To add more clearity to this update HUM tool is now deprecated and all the other modules are club into one exe for better user experience.
Now you can use all modules at a time rather can opening and closing Exe's for different CPU make.
How to use New Hydra Tool v2023.1.6.1
1.Download Zip from Official website or from here
2.Extract the content of the file to your Hydra Directory.
3.Before opening delete db folder first then Open New All in exe.
4.The very First Screen you will see is the Home screen now.
5.From Home screen you can do DB update, Update Module files, etc
Download Link : Gdrive , Mega , MediaFire
Full Setup : Gdrive , OneDrive , Mediafire
You can write your issue with new Exe in this thread so it will be Highlighted
Note : There might be some bugs and glitches in intial release. Feedback and a little patience with it is appreciated. Team working hard to provide you the best in the market solution tool.
HYDRA Tool - Powerful Advanced Complete
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 210800017698
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-5-0]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
IMEIRepair Function......
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Openning Port [COM125] Ok
Firmware ID : MPSS.JO.1.2.c2.3-00022-8937_GENNS_PACK-1.122257.2.124306.3
Build Date : ep 11 202017:53:14Nov 14 201722:00:008937.gen: d
IMEI1 : 358847108102528
IMEI2 : 358847108102536
----------------------------------
Repairing IMEI Method 2...
Finalizing Process...
All done
Elapsed Time : 00:00:04
==================================
Openning Port [COM125] Ok
Firmware ID : MPSS.JO.1.2.c2.3-00022-8937_GENNS_PACK-1.122257.2.124306.3
Build Date : ep 11 202017:53:14Nov 14 201722:00:008937.gen: d
IMEI1 : 3588471081====
IMEI2 : 3588471081====
----------------------------------
Repairing IMEI Oppo/OnePlus...
Done!!!!
Elapsed Time : 00:00:03
Hydra Tool v2023.1.6.1 All in One Exe and New User Interface Update !
We are glad to announce the release of the new all in one Exe.
While this new User Interface is in development phase user can test it and post back with the feedbacks on what can be improved more.
To add more clearity to this update HUM tool is now deprecated and all the other modules are club into one exe for better user experience.
Now you can use all modules at a time rather can opening and closing Exe's for different CPU make.
How to use New Hydra Tool v2023.1.6.1
1.Download Zip from Official website or from here
2.Extract the content of the file to your Hydra Directory.
3.Before opening delete db folder first then Open New All in exe.
4.The very First Screen you will see is the Home screen now.
5.From Home screen you can do DB update, Update Module files, etc
Download Link : Gdrive , Mega , MediaFire
Full Setup : Gdrive , OneDrive , Mediafire
You can write your issue with new Exe in this thread so it will be Highlighted
Note : There might be some bugs and glitches in intial release. Feedback and a little patience with it is appreciated. Team working hard to provide you the best in the market solution tool.
HYDRA Tool - Powerful Advanced Complete
Activating Module...Hydra Tool v2023.1.6.1 All in One Exe and New User Interface Update !
We are glad to announce the release of the new all in one Exe.
While this new User Interface is in development phase user can test it and post back with the feedbacks on what can be improved more.
To add more clearity to this update HUM tool is now deprecated and all the other modules are club into one exe for better user experience.
Now you can use all modules at a time rather can opening and closing Exe's for different CPU make.
How to use New Hydra Tool v2023.1.6.1
1.Download Zip from Official website or from here
2.Extract the content of the file to your Hydra Directory.
3.Before opening delete db folder first then Open New All in exe.
4.The very First Screen you will see is the Home screen now.
5.From Home screen you can do DB update, Update Module files, etc
Download Link : Gdrive , Mega , MediaFire
Full Setup : Gdrive , OneDrive , Mediafire
You can write your issue with new Exe in this thread so it will be Highlighted
Note : There might be some bugs and glitches in intial release. Feedback and a little patience with it is appreciated. Team working hard to provide you the best in the market solution tool.
HYDRA Tool - Powerful Advanced Complete
- Main....> Ok
- MediaTek....> Ok
- Qualcomm....> Ok
- Unisoc....> Ok
- Propack One....> ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!!
Updating Modules...
- Main.... > Ok
- MediaTek.... > Ok
- Qualcomm.... > Ok
- Unisoc.... > Ok
- Propack One.... > ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!
jorgelp2012
Member
ProPack not released yet,please wait for official update.
FRP FAIL
PreOperation Configuration
Brand : XIAOMI Model : Redmi Note 10 (mojito) Storage : Auto
Loader: h:\box setup\hydra tool\boot\hfirehose\0000000000720000_1bebe3863a6781db_304dc352_xiaomi_auth.fhprg
Port : Auto
Searching for Qualcomm 9008 Device...Found
FriendlyName :Qualcomm HS-USB QDLoader 9008 (COM13)
SymbolicName :\\?\usb#vid_05c6&pid_9008#6&236cc9f3&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :03/10/2015,2.01.01.00
Getting device info. [Connected].Ok
Device MODE : Firehose
Connecting to Firehose...
Ping..................... Ok
Configuration[FHProt_Auto].
Xiaomi Authentication needed...
Signature Request -> bob[nPkz
Signature @256bytes Authentication.... Denied..
ERROR: Signature Verification Failed.
ERROR : Configuration[ConnectAutoAdjustMaxPacketSize]Failed
Action Result : Failed
Elapsed Time : 00:00:04
PreOperation Configuration
Brand : XIAOMI Model : Redmi Note 10 (mojito) Storage : Auto
Loader: h:\box setup\hydra tool\boot\hfirehose\0000000000720000_1bebe3863a6781db_304dc352_xiaomi_auth.fhprg
Port : Auto
Searching for Qualcomm 9008 Device...Found
FriendlyName :Qualcomm HS-USB QDLoader 9008 (COM13)
SymbolicName :\\?\usb#vid_05c6&pid_9008#6&236cc9f3&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :03/10/2015,2.01.01.00
Getting device info. [Connected].Ok
Device MODE : Firehose
Connecting to Firehose...
Ping..................... Ok
Configuration[FHProt_Auto].
Xiaomi Authentication needed...
Signature Request -> bob[nPkz
Signature @256bytes Authentication.... Denied..
ERROR: Signature Verification Failed.
ERROR : Configuration[ConnectAutoAdjustMaxPacketSize]Failed
Action Result : Failed
Elapsed Time : 00:00:04
Hydra Tool v2023.1.6.1 All in One Exe and New User Interface Update !
We are glad to announce the release of the new all in one Exe.
While this new User Interface is in development phase user can test it and post back with the feedbacks on what can be improved more.
To add more clearity to this update HUM tool is now deprecated and all the other modules are club into one exe for better user experience.
Now you can use all modules at a time rather can opening and closing Exe's for different CPU make.
How to use New Hydra Tool v2023.1.6.1
1.Download Zip from Official website or from here
2.Extract the content of the file to your Hydra Directory.
3.Before opening delete db folder first then Open New All in exe.
4.The very First Screen you will see is the Home screen now.
5.From Home screen you can do DB update, Update Module files, etc
Download Link : Gdrive , Mega , MediaFire
Full Setup : Gdrive , OneDrive , Mediafire
You can write your issue with new Exe in this thread so it will be Highlighted
Note : There might be some bugs and glitches in intial release. Feedback and a little patience with it is appreciated. Team working hard to provide you the best in the market solution tool.
HYDRA Tool - Powerful Advanced Complete
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 210800017698
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-5-0]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Format/Factory Reset/ScreenLock
Safe Format
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM121)
Device : /6&236cc9f3&0&6
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&236cc9f3&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM121] Ok
Handshaking...
HwCode : 0326 {MT6755/M/T/S}
Hwver : 0000
Target config : 01
SBC : 01 (True)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CB00
SW Ver : 0001
ME_ID : 04A28E367603BD05E50795D18AA51CAD
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200B40
Starting to dump...
Prel Size : 0x0002C0FC
Successfully dump preloader.. [H:\BOX SETUP\Hydra Tool\Boot\PreloaderDump\preloader_oppo6750_15131.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
Sending auto preloader from dump... [preloader_oppo6750_15131.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x0000000000038000-224 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000000400000-4 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A484247346132A42289E89EA389 - HBG4a2
HW-CODE : 0x6750
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCB00
SW-VERSION : 0x1
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : full-speed
Reconnecting to preloader...
Connected to preloader
Error: on sending data: DA hash mismatch
*DA Extensions failed to enable
Reading Partition Table ..
Reconnecting to preloader...
Connected to preloader
Partition Count : 35
--------------- Reading build.prop content ---------------
Brand : OPPO
Vendor : OPPO
Model : OPPO F1s
Product : oppo6750_15131
Manufacturer : OPPO
ID : LMY47I
SDK : 22
Release : 5.1
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Description : full_oppo6750_15131-user 5.1 LMY47I 1482847378 dev-keys
Device : A59m
Display ID : A1601EX_11_A.16_161227
Security Patch : 2016-09-05
Platform : mt6750
Fingerprint : OPPO/A59/A59:5.1/LMY47I/1474447292:user/release-keys
StorageType : mtp,mass_storage
--------------- end of build.prop content ---------------
Reading IMEI........
IMEI1 : ------
IMEI2 : -------
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB
Reconnecting to preloader...
Connected to preloader = Ok [preloader_oppo6750_15131.bin]
*Creating Scatter file... H:\BOX SETUP\Hydra Tool\Backup\MTKBKUP\0326_04A28E367603BD05E50795D18AA51CAD\Auto\061123214800\6755_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 5 MB = Ok
- nvdata(nvdata.bin), 32 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 15.469 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- oppo_custom(oppo_custom.bin), 1024 KB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
- lk(lk.bin), 1024 KB = Ok
Backup Done!!!
Reconnecting to preloader...
Connected to preloader
------------------------------
Factory Reset Flash Mode..
------------------------------
Operation : Safeformat Universal...
Error : sending parameter: 0xC002000C_Write data not allowed
Port Disconnected
Action Result : Failed
Elapsed Time : 00:03:37
Version : Hydra Tool v 1.2
Serial : 210800017698
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-5-0]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Format/Factory Reset/ScreenLock
Safe Format
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1633 (COM121)
Device : /6&236cc9f3&0&6
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&236cc9f3&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM121] Ok
Handshaking...
HwCode : 0326 {MT6755/M/T/S}
Hwver : 0000
Target config : 01
SBC : 01 (True)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CB00
SW Ver : 0001
ME_ID : 04A28E367603BD05E50795D18AA51CAD
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200B40
Starting to dump...
Prel Size : 0x0002C0FC
Successfully dump preloader.. [H:\BOX SETUP\Hydra Tool\Boot\PreloaderDump\preloader_oppo6750_15131.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
Sending auto preloader from dump... [preloader_oppo6750_15131.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x0000000000038000-224 KB
IRAM Size : 0x00000000C0000000-3 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000000400000-4 MB
EMMC USER Size : 0x0000000747C00000-29.121 GB
EMMC CID : 90014A484247346132A42289E89EA389 - HBG4a2
HW-CODE : 0x6750
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCB00
SW-VERSION : 0x1
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : full-speed
Reconnecting to preloader...
Connected to preloader
Error: on sending data: DA hash mismatch
*DA Extensions failed to enable
Reading Partition Table ..
Reconnecting to preloader...
Connected to preloader
Partition Count : 35
--------------- Reading build.prop content ---------------
Brand : OPPO
Vendor : OPPO
Model : OPPO F1s
Product : oppo6750_15131
Manufacturer : OPPO
ID : LMY47I
SDK : 22
Release : 5.1
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Description : full_oppo6750_15131-user 5.1 LMY47I 1482847378 dev-keys
Device : A59m
Display ID : A1601EX_11_A.16_161227
Security Patch : 2016-09-05
Platform : mt6750
Fingerprint : OPPO/A59/A59:5.1/LMY47I/1474447292:user/release-keys
StorageType : mtp,mass_storage
--------------- end of build.prop content ---------------
Reading IMEI........
IMEI1 : ------
IMEI2 : -------
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB
Reconnecting to preloader...
Connected to preloader = Ok [preloader_oppo6750_15131.bin]
*Creating Scatter file... H:\BOX SETUP\Hydra Tool\Backup\MTKBKUP\0326_04A28E367603BD05E50795D18AA51CAD\Auto\061123214800\6755_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 5 MB = Ok
- nvdata(nvdata.bin), 32 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 15.469 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- oppo_custom(oppo_custom.bin), 1024 KB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
- lk(lk.bin), 1024 KB = Ok
Backup Done!!!
Reconnecting to preloader...
Connected to preloader
------------------------------
Factory Reset Flash Mode..
------------------------------
Operation : Safeformat Universal...
Error : sending parameter: 0xC002000C_Write data not allowed
Port Disconnected
Action Result : Failed
Elapsed Time : 00:03:37
Update failed!
Stuck!
Need help!
Unable to complete update tool
Stuck!
Need help!
Unable to complete update tool
Activating Module...
- Main....> Ok
- MediaTek....> Ok
- Qualcomm....> Ok
- Unisoc....> Ok
- Propack One....> ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!!
Updating Modules...
- Main.... > Ok
- MediaTek.... > Ok
- Qualcomm.... > Ok
- Unisoc.... > Ok
- Propack One.... > ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!
ysfcelik317
Junior Member
hi
help pls...
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 190900002167
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]
Activating Module...
- Main....> Ok
- MediaTek....> Ok
- Qualcomm....> Ok
- Unisoc....> Ok
- Propack One....> ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!!
Updating Modules...
- Main.... > Ok
- MediaTek.... > Ok
- Qualcomm.... > Ok
- Unisoc.... > Ok
- Propack One.... > ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!
help pls...
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 190900002167
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]
Activating Module...
- Main....> Ok
- MediaTek....> Ok
- Qualcomm....> Ok
- Unisoc....> Ok
- Propack One....> ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!!
Updating Modules...
- Main.... > Ok
- MediaTek.... > Ok
- Qualcomm.... > Ok
- Unisoc.... > Ok
- Propack One.... > ERROR: PROPACK1 Module Not Activated, Please contact reseller for activation.
Done!!
Hello please click active modules at configuration tab