Help I NEED OFFICIAL FDL FILE OF RMX3268

LIL MOBI MECHANIC · Dec 6, 2022

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R_GsmMafia.Com.pac
VER : BP_R2.0.1
LEN : 8.41 GiB
CPU : RMX3265
VER :

Reading package ...
Read package finished!

Product Brand : realme
Product Device : RE54D1
Product Model : RMX3265
Product Name : RMX3265
Patch Level : RP1A.201005.001
Display ID : RMX3265_11_A.19
Ver. Incmt : 1638293036000
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-11-05
Build Time : 30.11.2021
SW OTA Version : RMX3265_11_A.19_20211130232130
Product Info : RMX3265
Product Board : ums512
Board Platform : ums512
Product Manfct : realme

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R_GsmMafia.Com.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R_GsmMafia.Com.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R_GsmMafia.Com.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

ISSUE=HANG ON LOGO BY UNLOCK BY SOMEONE ELSE
NOW MOBILE IS DEAD ALL SPD UPGRADE TOOL RESEARCH TOOL FAILED WITH PARTITION ERROR
IM UNABLE TO FLASH IN CM2 ALSO NEED OFFICIAL FDL FILES IF ANYONE HAS IT PLEASE SHARE
THANK YOU

Infinity-Box · Dec 7, 2022

do you have sw log text for previous failed operation?
I mean with the tools that gives a problem.
No idea what may be wrong, want to see previous actions

LIL MOBI MECHANIC · Dec 7, 2022

Infinity-Box said:
do you have sw log text for previous failed operation?
I mean with the tools that gives a problem.
No idea what may be wrong, want to see previous actions

Extracted FDL FROM PAC FIRMWARE NOT SUPPORTED NOT WITH ALL C25Y BOOT OR FDL FILES INSIDE CM2 I WAS ABLE TO FLASH. I HAVE SEEN SAME ISSUE SOLVED WITH FLASHING WITH CM2SP2 THAT USER ON GSMHOSTING USED OFFICIAL FDL FILES BUT HE IS OFFLINE SO I COULDN'T GET THOSE FILES FROM HIM. I HAVE DOWNLOADED SO MANY FIRMWARES BUT WITH NONE I WAS ABLE TO COMPLETE THE FLASHING PROCESS

LIL MOBI MECHANIC · Dec 7, 2022

Infinity-Box said:
do you have sw log text for previous failed operation?
I mean with the tools that gives a problem.
No idea what may be wrong, want to see previous actions

IF YOU COULD PROVIDE ME THE OFFICIAL DEAD FIX FIRMWARE OR FDL LOADERS WITH THEN I WOULD BE VERY THANKFUL

LIL MOBI MECHANIC · Dec 8, 2022

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Open : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
VER : BP_R2.0.1
LEN : 9.25 GiB
CPU : RMX3265
VER :

Reading package ...
Read package finished!

Product Brand : realme
Product Device : RE54D1
Product Model : RMX3265
Product Name : RMX3265
Patch Level : RP1A.201005.001
Display ID : RMX3265_11_A.29
Ver. Incmt : 1652814687000
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-05-05
Build Time : 17.05.2022
SW OTA Version : RMX3265_11_A.29_20220518010845
Product Info : RMX3265
Product Board : ums512
Board Platform : ums512
Product Manfct : realme

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update failed!
ERROR : 000000A2:A2000000FF5D7E00
REP : WRITE FAILED! FLASH BAD?

>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update failed!
ERROR : 000000A2:A2000000FF5D7E00
REP : WRITE FAILED! FLASH BAD?

>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update failed!
ERROR : 000000A2:A2000000FF5D7E00
REP : WRITE FAILED! FLASH BAD?

>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update failed!
ERROR : 000000A2:A2000000FF5D7E00
REP : WRITE FAILED! FLASH BAD?

>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update failed!
ERROR : 000000A2:A2000000FF5D7E00
REP : WRITE FAILED! FLASH BAD?

>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

ERASE : FORMAT WHOLE FLASH ...
ERASE : FORMAT FLASH Completed!

Prepare target ...
Prepare : Erase error!
ERROR : 0000008E:00000000FF7F0000
GEN : UNKNOWN RESPONSE!

>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3268_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update failed!
ERROR : 000000A2:A2000000FF5D7E00
REP : WRITE FAILED! FLASH BAD?

>>> Error : Flashing failed!
>>> Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

replaced battery changed pc tried with soo many flash files still stuck on partition unable to flash please help

Infinity-Box · Dec 8, 2022

> ISSUE=HANG ON LOGO BY UNLOCK BY SOMEONE ELSE

Are you sure it was damaged with unlock?
How to fix stuck/hang on boot logo - Infinity Box Dongle [CM2] [BEST] Support

LIL MOBI MECHANIC · Dec 9, 2022

Infinity-Box said:
> ISSUE=HANG ON LOGO BY UNLOCK BY SOMEONE ELSE

Are you sure it was damaged with unlock?
How to fix stuck/hang on boot logo - Infinity Box Dongle [CM2] [BEST] Support

I returned the handset Realme Tool Server Offline. so, can't flash it with cm2 don't know what went wrong but i could not arrange the Fdl files used by someone in gsm-hosting and fixed the same issue like this

Search

Search

Help I NEED OFFICIAL FDL FILE OF RMX3268

LIL MOBI MECHANIC

Friend's Martview

Infinity-Box

LIL MOBI MECHANIC

Friend's Martview

LIL MOBI MECHANIC

Friend's Martview

LIL MOBI MECHANIC

Friend's Martview

Infinity-Box

LIL MOBI MECHANIC

Friend's Martview