If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

arhanmobile · Aug 17, 2023

NKhan_Gsm said:
So if it is UFS how I can remove its Pattern lock ?

WBR

For this Ufi UFS kit is required. only then you will be able to unlock it.

NKhan_Gsm · Aug 23, 2023

Hello Sir ! I am newbie in MMC works I got a VIVO Y95 1807 with pattern lock after formatting it became dead I tried to write DUMp with ISP but it was not detecting so I removed eMMC and want to write DUMP file it gives Error here screenshots Please guide me how to solve it .

arhanmobile · Aug 23, 2023

NKhan_Gsm said:
Hello Sir ! I am newbie in MMC works I got a VIVO Y95 1807 with pattern lock after formatting it became dead I tried to write DUMp with ISP but it was not detecting so I removed eMMC and want to write DUMP file it gives Error here screenshots Please guide me how to solve it .

Emmc health is very bad That's why it's dead after format.

NKhan_Gsm · Aug 23, 2023

aftab_ansari5287 said:
Emmc health is very bad That's why it's dead after format.

OK Sir so is it possible to FIX it ?

WBR

arhanmobile · Aug 24, 2023

NKhan_Gsm said:
OK Sir so is it possible to FIX it ?

WBR

Can be tried but not 100% sure that the jobs will be done.

NKhan_Gsm · Aug 24, 2023

aftab_ansari5287 said:
Can be tried but not 100% sure that the jobs will be done.

Sir Can you guide me or give me its manual ?

NKhan_Gsm · Aug 24, 2023

aftab_ansari5287 said:
Can be tried but not 100% sure that the jobs will be done.

Sir Can I write VIVO Y95 1807 DUMP on Samsung J510FN eMMC ? If yes I how I can change it to VIVO Y95 1807 eMMC please guide me sir ?

arhanmobile · Aug 25, 2023

NKhan_Gsm said:
Sir Can I write VIVO Y95 1807 DUMP on Samsung J510FN eMMC ? If yes I how I can change it to VIVO Y95 1807 eMMC please guide me sir ?

vivo y95 is a qualcomm device you can't put new chip in it. It will not work. If you swap the cpu and emmc from a dead board it will work.

All TECH 4 You · Aug 25, 2023

Sir my UFI Box In One Problem is Coming

UFI EMMC Tool Open Successfully But Android Tool Not Opening

Note: I was many setup uninstall & Install but problem same

So Please Help Me

Thanks & Regards By:All TECH 4 You

All TECH 4 You · Aug 28, 2023

All TECH 4 You said:
Sir my UFI Box In One Problem is Coming

UFI EMMC Tool Open Successfully But Android Tool Not Opening

Note: I was many setup uninstall & Install but problem same

So Please Help Me

Thanks & Regards By:All TECH 4 You

So Please Help Me

Thanks & Regards By:All TECH 4 You

abdulghaffarhelo22 · Aug 30, 2023

Hi ufi team please add dual preloaded in flash tab easy j tag already have this feature please add .and when write Emmc firmware ufi error to write firmware Frist try please solve this new update

dondav77 · Sep 11, 2023

Plz I need Nokia ta-1497 ISP pinouts or firmware

a839760072 · Sep 12, 2023

ranjanjyoti said:
Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K5XYMB (0x4b3558594d42), rev: 0x00, serial number: 0xAAA5EA2A
Manufacturing date: Dec 2014
CID: 1501004B 3558594D 4200AAA5 EA2AC1D0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)

正在加载文件：“\Nokia\Nokia_6.1(00WW_4_15O-V4.15O-QKQ1.190828.002)[KMDH6001DM-B422_FA429062]\ext_csd.bin”，大小：512 字节...
正在写入 extcsd，512 字节...无法切换[16][0,16,57]（返回代码：1，CMD 错误：超时）！！！
无法切换[67][0,67,200]（返回码：4，CMD错误：无效响应）!!!
无法切换[68][0,68,200]（返回码：1，CMD错误：超时）！！！
无法切换[101][0,101,5]（返回代码：4，CMD错误：无效响应）!!!
切换[110][0,110,152]失败（返回码：1，CMD错误：超时）!!!
无法切换[111][0,111,23]（返回码：4，CMD错误：无效响应）!!!
切换[112][0,112,3]失败（返回码：1，CMD错误：超时）!!!
无法切换[114][0,114,0]（返回码：4，CMD错误：无效响应）!!!
切换[120][0,120,0]失败（返回码：1，CMD错误：超时）!!!
无法切换[163][0,163,2]（返回代码：4，CMD错误：无效响应）!!!
完毕
新的 EXT CSD 信息：
EXT_CSD 修订版：1.6（MMC v4.5、v4.51）
分区信息：
引导 1：4 MiB
引导2：4 MiB
RPMB：4 MiB [已配置，计数器：0]
用户区：3.64 GiB（3,909,091,328 字节）
缓存大小：64 MiB
硬件复位功能：1个
安全写保护信息：0x00
安全功能支持：0x55
分区配置：0x38
分区支持：0x07
启动配置保护：0x00
引导总线条件：0x00
引导区写保护：0x00
失败...... 失败...... 失败......请解决extcsd写入

你好，请问你的错误问题解决了吗？

a839760072 · Sep 13, 2023

ranjanjyoti said:
Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K5XYMB (0x4b3558594d42), rev: 0x00, serial number: 0xAAA5EA2A
Manufacturing date: Dec 2014
CID: 1501004B 3558594D 4200AAA5 EA2AC1D0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)

Loading file: "\Nokia\Nokia_6.1(00WW_4_15O-V4.15O-QKQ1.190828.002)[KMDH6001DM-B422_FA429062]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,57] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[67][0,67,200] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[68][0,68,200] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[101][0,101,5] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[110][0,110,152] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[111][0,111,23] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[112][0,112,3] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[163][0,163,2] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Fail....... Fail....... Fail....... Please solve extcsd write

I am using an EMMC adapter and have encountered the same problem，
How should I fix it?

a839760072 · Sep 13, 2023

aftab_ansari5287 said:
vivo y95 is a qualcomm device you can't put new chip in it. It will not work. If you swap the cpu and emmc from a dead board it will work.

Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K5XYMB (0x4b3558594d42), rev: 0x00, serial number: 0xAAA5EA2A
Manufacturing date: Dec 2014
CID: 1501004B 3558594D 4200AAA5 EA2AC1D0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)

Loading file: "\Nokia\Nokia_6.1(00WW_4_15O-V4.15O-QKQ1.190828.002)[KMDH6001DM-B422_FA429062]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,57] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[67][0,67,200] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[68][0,68,200] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[101][0,101,5] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[110][0,110,152] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[111][0,111,23] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[112][0,112,3] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[163][0,163,2] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Fail....... Fail....... Fail....... Please solve extcsd write

How should I fix it?

frp gsm · Sep 13, 2023

l have always cmd error l think in adaptr proplem how can l fix the adpter sir

arhanmobile · Sep 13, 2023

a839760072 said:
Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2167
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - MMC
Manufacturer ID: 0x15 (Samsung)
Product name: K5XYMB (0x4b3558594d42), rev: 0x00, serial number: 0xAAA5EA2A
Manufacturing date: Dec 2014
CID: 1501004B 3558594D 4200AAA5 EA2AC1D0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)

Loading file: "\Nokia\Nokia_6.1(00WW_4_15O-V4.15O-QKQ1.190828.002)[KMDH6001DM-B422_FA429062]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Failed to switch[16][0,16,57] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[67][0,67,200] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[68][0,68,200] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[101][0,101,5] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[110][0,110,152] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[111][0,111,23] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[112][0,112,3] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[114][0,114,0] (return code: 4, CMD Error: Invalid response) !!!
Failed to switch[120][0,120,0] (return code: 1, CMD Error: Timeout) !!!
Failed to switch[163][0,163,2] (return code: 4, CMD Error: Invalid response) !!!
Done
New EXT CSD info:
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 0]
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x00
Secure Feature support: 0x55
Partition configuration: 0x38
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Fail....... Fail....... Fail....... Please solve extcsd write

How should I fix it?

frp gsm said:
l have always cmd error l think in adaptr proplem how can l fix the adpter sir

This is a general error, it will not harm your phone, it will be fixed in the next update.
Untick Ext-Csd and flash it. The phone will not be affected by the absence of Ext-Csd flash. You can also set it manually.
you may try to set boot config manually or via preset menu in ext_csd tab according to your SoC platform.

a839760072 · Sep 13, 2023

Deepesh Sharma said:
你好，
如果 Ufi 盒分离有问题或恢复手机过程中遇到任何问题
在此发布您的完整详细信息和屏幕截图
我们尽力尽快解决

请告诉我如何解决它。我在中国邮寄盒子不太方便。谢谢。

a839760072 · Sep 13, 2023

frp gsm said:
l have always cmd error l think in adaptr proplem how can l fix the adpter

frp gsm said:

l have always cmd error l think in adaptr proplem how can l fix the adpter sir

Click to expand...

How should I fix it?

a839760072 · Sep 14, 2023

Deepesh Sharma said:
你好，
如果 Ufi 盒分离有问题或恢复手机过程中遇到任何问题
在此发布您的完整详细信息和屏幕截图
我们尽力尽快解决

询问这个故障应该怎么解决，求指导修复方法，目前中国，国内无人给我们做售后。

If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

Active Member

Attachments

Active Member

Active Member

Active Member

Attachments

Friend's Martview

Friend's Martview

Member

Active Member

Active Member

Active Member

Active Member

Junior Member

Active Member

Attachments

Active Member

Active Member

Attachments