If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

[drjaved_akhter]

WHEN I OPEN MEDIATEK TOOL AND SLECT MODEL THEN ERROR THIS HOW TO SOLVE THIS ERROR SEE SCREEN SHOOT

 

[arhanmobile]

WHEN I OPEN MEDIATEK TOOL AND SLECT MODEL THEN ERROR THIS HOW TO SOLVE THIS ERROR SEE SCREEN SHOOT



View attachment 48604

Hello [B]drjaved_akhter[/B]
Please reinstall the software to fix your issue.
But before reinstall, you may try to delete UFI setup folder in drive C.
We recommend to always install the UFI setup folder only on the system drive(mostly in drive C in most of the system).
B.R.

 

[demircivan4]

Xiaomi note 9 Pro flashing AUTH error

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM4)
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.3.1, date: 3-21-2018
Initializing...
MSM Serial number: 0x6ed4d7b9
MSM HW ID: 0x001490e1 , OEM ID: 0x0072 (Xiaomi), MODEL ID: 0x0000 OEM Public Key Hash: 1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda4692ce5e948c6fd409408f4c919fcadfe3
Comm error 997: Overlapped I/O operation is in progress
Comm error 997: Overlapped I/O operation is in progress
Error: failed on sending HELLO response!
Disconnect USB cable, battery and try again!

I am having the same problem. Several different model phones have the same problem. please help

 

[demircivan4]

I am having the same problem. Several different model phones have the same problem. please help. I can't use ufi because of this problem. We paid money and bought a UFI, but I can't use it, isn't it ridiculous?

 

[prsymdinesh1990@gmai]

Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-3956
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(0 bytes)
Secure Feature support: 0x15
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
moviNAND: card is run in boot mode.
WARNING: the "Update eMMC Fw" button is disabled because the eMMC CID has changed.
To enable, you have to restore back the CID using "Restore CID" button.




help plz

 

[demircivan4]

I am having the same problem. Several different model phones have the same problem. please help

does anyone have any knowledge about this?
this error:
Comm error 997: Overlapped I/O operation is in progress
Comm error 997: Overlapped I/O operation is in progress
Error: failed on sending HELLO response!
Disconnect USB cable, battery and try again!

 

[manojkumarpati]

dipesh bhai please tell me why my android tool box deos not detect adb devices, how to solve?

 

[MrRobotChid]

Help just bought this UFS adapter I updated Box firmware and activate but still says this serial needs ufs tool box activation every time I activate it just accept and then open still wants activation PLEAAE HELP OUT

 

[Saad_ikram]

Please ADD "Rpmb program hex key" feature in Ufi-emmc tool box
Requirement level of need: Urgent

 

[iletisimhizmeti]

Şekillendirmeye yönelik sorun! Ufi.exe cende 012781F4'e giriş yapmak için 00000008 adresinin tanıtımını yapın

 

[itechcentre2]

please help am getting this error when sychronizing files

 

[ranjanjyoti]

Pls fix the bug as quick as possible

 

[malikashour]

please add sweetin in flash edl mode

 

[ifhiz]

i was trying to connect tegra 2 emmc chip but it wasn't showing partitions table
i have seeen tegra partition table is supported by ufi
i need to dump firmware from the device guide me

 

[sonu0619]

ufi box ufs error read or erase always

Connection status: EHCI:HUB:HUB[#2]:USB 2.10 High-Speed
Interface: UFI UFS-PROG
Serial number: 002.......
Fw version: 1.35 (Feb 23 2022 02:42:28)

Power mode:
TX[0]: PWM-GEAR-G1
RX[0]: PWM-GEAR-G1
Error: read UFS INTERCONNECT descriptor [0x04, 0x00, 0x00] failed.

 

[sonu0619]

UFI BOX UFS ERROR ERASE LUN
Connection status: EHCI:HUB:HUB[#2]:USB 2.10 High-Speed
Interface: UFI UFS-PROG
Serial number: 0020.............
Fw version: 1.35 (Feb 23 2022 02:42:28)

Power mode:
TX[1]: HS-GEAR-G3B
RX[1]: HS-GEAR-G3B
Ref Clock Frequency: 26MHz
Permanent write protection disabled
Power on write protection disabled
Configuration Descriptor not locked (default)
Specification version: UFS 2.10
Number of LU: 3, WLU: 4
Bootable feature enabled
Enabled boot from Boot LU A
Support for security LU: 1
UFS Inquiry: SAMSUNG KM2V8001CM-B707 0600
Manufacturing date: Nov 2019
Manufacturer ID: 0x01CE
Manufacturer name: SAMSUNG
Product name: KM2V8001CM-B707
Product revision level: 0600
Serial number: 3b3a6ee0cf0c

Wiping LUN2 ... Failed

 

[sonu0619]

redmi note 8 pro ufs flashing error

Connection status: EHCI:HUB:HUB[#2]:USB 2.10 High-Speed
Interface: UFI UFS-PROG
Serial number: 0020..............
Fw version: 1.35 (Feb 23 2022 02:42:28)

Power mode:
TX[1]: HS-GEAR-G3B
RX[1]: HS-GEAR-G3B
Ref Clock Frequency: 26MHz
Permanent write protection disabled
Power on write protection disabled
Configuration Descriptor not locked (default)
Specification version: UFS 2.10
Number of LU: 3, WLU: 4
Bootable feature enabled
Enabled boot from Boot LU A
Support for security LU: 1
UFS Inquiry: SAMSUNG KM2V8001CM-B707 0600
Manufacturing date: Nov 2019
Manufacturer ID: 0x01CE
Manufacturer name: SAMSUNG
Product name: KM2V8001CM-B707
Product revision level: 0600
Serial number: 3b3a6ee0cf0c

Active LU: LUN2
Processing file: "preloader_begoniain.bin"...
Writing preloader at 0x00000000 (79 sectors)... Done in 0.036 s
Active LU: LUN0
Operation canceled by user request.

 

[prsymdinesh1990@gmai]

hai
my box stuck both writing and reading files
i try direct emmc and isp too
i hope i facing this proble after update frimware

 

[diamondmobile]

i have ufi box .when i conect any emmc adopter box desconected and some time box goto dfu moad plz help sir

 

[Saad_ikram]

Ufi box new Emmc tool box is full of bugs, even after writing exclude-dump the handset is not getting on