Infinity Infinity Chinese Miracle-2 MTK/MediaTek v2.24

Infinity Box & Dongle

=-rebel-=

Moderator
Jan 22, 2020
1,183
958
Philippines
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features!
------------------------------------------------------------------------------------

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved


NewFeature : UniversalBoot : EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )


NewFeature : UniversalBoot : AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!

!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required

Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated

MemoryTool
Changed: "Init GPT/PMT with resize" feature improved


Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

Other
Changed: Some general changes and fixes

Infinity Cm2mtk2 v2.4
 

dj007

Friend's Martview
Apr 17, 2020
308
170
gujarat
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features!
------------------------------------------------------------------------------------

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved


NewFeature : UniversalBoot : EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )


NewFeature : UniversalBoot : AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!

!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required

Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated

MemoryTool
Changed: "Init GPT/PMT with resize" feature improved


Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

Other
Changed: Some general changes and fixes

Infinity Cm2mtk2 v2.4
TOO LATE ,UMT ALREADY PROVIDE THIS UPDATE BEFOR CM2 , PLS PROVIDE PHONE MODEL NO SPECIFIC UPDATE
 

bisdak

Friend's Martview
Nov 19, 2020
304
208
Vancouver Canada B.C
Card found : 35CXXXXX, v0148
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.24

Load IDBase v524190 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.24 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : C06CF9477640301151F0E423824777FE
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : E2D6EBA21D62E94654CFA0635CFB78EEA886B34AA2761D13A3B29DF03C25BE82
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Look for cookies
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 000C
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514436334D4201B73675226B9
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 78C2C5FFC133AE5F52966E4BA487945

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-03-01
Build Time : 06.04.2021
Product Model : vivo 1820
Product Brand : vivo
Product Name : PD1818HF_EX
Product Device : PD1818HF_EX
Product Manfct : vivo
Product Info : k62v1_64_bsp
Product Board : k62v1_64_bsp
Board Platform : mt6765

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *)

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 14 ]
Backup path : Backup\MT6765__078C2C5FFC133AE5F52966E4BA487945\
Backup done!


STORAGE : LifeStatus : eMMC : OK!

Done!
Elapsed: 00:01:18
 
  • Like
Reactions: =-rebel-=

sanjay mobile

Junior Member
May 14, 2021
3
0
mumbai
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features!
------------------------------------------------------------------------------------

As ordinary, unique functions and methods released

Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved


NewFeature : UniversalBoot : EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )


NewFeature : UniversalBoot : AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!

!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required

Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated

MemoryTool
Changed: "Init GPT/PMT with resize" feature improved


Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated

Other
Changed: Some general changes and fixes

Infinity Cm2mtk2 v2.4
i have infinity box can i run this setup
 

riadgsm1971

Active Member
Nov 7, 2019
20
9
is your cm2 a new one? what version your using before this update?
NOt new one, but I bought yearly activation which got more than 8 months. I wanted to know if only installing latest software will be enough or have to install older 2.21 version first??
 
Top