Start Connect v2.97
Selected config: 0_base/base_v2404
Protocol: Boot [DA] Factory v7
Port: BROM + PL; Force BROM: Off; USB High-Speed: On
DA Key: custom; LSLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #81 ] MediaTek USB Port (COM81) 0E8D:0003
Waiting for boot Ack...
Handshake... Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Helio Cervino|P35|G35|G36|G37|G50 Type: [Raphael]
SecLevel: 0x00E5 SBC+SDA+EXT; BROM/BL ver: 0x05/0xFE [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
MEID: 95AEC31501E66B8E7E9A646B4D0BEF43
SOCID: 5590732FE831C4BB2182A3C54141BEB37D7CC2953D1DB980D138BEC24C8CB114
VNID: C6D0EA0BBC5685EF568E97BB655D357BB1ECEAD9B039A7379D597011B10F5E03 tran(5)
SLA: Local Auth [Forced]
Auth v1...
LSLA...
configure libusb... Ok Ok Ok Ok Ok
Looking for EMI... Found Loaded Stored C:\InfinityBox\CM2MT2\phdata\emi-user\95AEC31501E66B8E7E9A646B4D0BEF43.bin
SLA start handshake? Auth Passed; SecLevel: 0x00E0
[df6e006e] C:\InfinityBox\CM2MT2\boot\0_base\base_v2404\MTK_AllInOne_DA.1121d1c5.bin
Looking for bootcode... Ok
DA Vendor: unknown
HW Vendor: tran(5)
Sending DA1... Ok [Required: Yes, Adjustable: Yes, Adjusted: Yes/Untold]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [none]... Ok
DA Set Params... Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: 150100445036444142021E48D46E5809 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445036444142 [DP6DAB] PRV: 0x02 Serial: 508089454 0x1E48D46E
MM/YY: 5/2021
EMI FireFly preloader_x688b_h659.bin with 20 memory types [9bd5dabc] slots: no
EMMC LP_DDR4X [90014A684445615033] Hynix 0x014A [hDEaP3] RAM: 6.00 Gb
EMMC LP_DDR4X [90014A68423861503E] Hynix 0x014A [hB8aP>] RAM: 3.00 Gb
EMMC LP_DDR4X [150100444836444142] Samsung 0x0100 [DH6DAB] RAM: 4.00 Gb
EMMC LP_DDR4X [150100445636444242] Samsung 0x0100 [DV6DBB] RAM: 4.00 Gb
EMMC LP_DDR4X [13014E47314A395339] Micron 0x014E [G1J9S9] RAM: 4.00 Gb
EMMC LP_DDR4X [90014A484347386134] Hynix 0x014A [HCG8a4] RAM: 4.00 Gb
EMMC LP_DDR4X [90014A484347386134] Hynix 0x014A [HCG8a4] RAM: 6.00 Gb
EMMC LP_DDR4X [90014A68433861503E] Hynix 0x014A [hC8aP>] RAM: 4.00 Gb
EMMC LP_DDR4X [90014A68433861503E] Hynix 0x014A [hC8aP>] RAM: 6.00 Gb
EMMC LP_DDR4X [90014A684339615033] Hynix 0x014A [hC9aP3] RAM: 4.00 Gb
EMMC LP_DDR4X [90014A68433861503E] Hynix 0x014A [hC8aP>] RAM: 3.00 Gb
EMMC LP_DDR4X [150100445036384D42] Samsung 0x0100 [DP68MB] RAM: 3.00 Gb
EMMC LP_DDR4X [13014E53304A394B39] Micron 0x014E [S0J9K9] RAM: 4.00 Gb
EMMC LP_DDR4X [150100445636444142] Samsung 0x0100 [DV6DAB] RAM: 4.00 Gb
EMMC LP_DDR4X [150100445036444142] Samsung 0x0100 [DP6DAB] RAM: 4.00 Gb
EMMC LP_DDR4X [150100445636444D42] Samsung 0x0100 [DV6DMB] RAM: 4.00 Gb
EMMC LP_DDR4X [150100444436384D42] Samsung 0x0100 [DD68MB] RAM: 3.00 Gb
EMMC LP_DDR4X [150100445036444242] Samsung 0x0100 [DP6DBB] RAM: 4.00 Gb
EMMC LP_DDR4X [150100445836384D42] Samsung 0x0100 [DX68MB] RAM: 3.00 Gb
EMMC LP_DDR4X [90014A68423861503E] Hynix 0x014A [hB8aP>] RAM: 3.00 Gb
Push EMI... EXT_RAM CFG Passed
Boot DA2... Ok [Required: Yes, Adjustable: Yes, Adjusted: Yes/Yes]
DA Sync... Ok
DA Auth no need
Get hardware info...
SRAM: 0x0003A000 232.00 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: 150100445036444142021E48D46E5809 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445036444142 [DP6DAB] PRV: 0x02 Serial: 508089454 0x1E48D46E
MM/YY: 5/2021
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE8F800000 58.24 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Helio Cervino|P35|G35|G36|G37|G50 Type: [Raphael]
MEID: 95AEC31501E66B8E7E9A646B4D0BEF43
SOCID: 5590732FE831C4BB2182A3C54141BEB37D7CC2953D1DB980D138BEC24C8CB114
HRID: 6D90E582ED2709EA2AEF051C46949D0B
RNID: AFCECDF4FBD0318D6BABBF39870710E3
VNID: C6D0EA0BBC5685EF568E97BB655D357BB1ECEAD9B039A7379D597011B10F5E03 tran(5)
USB: HIGH-SPEED
[Adjustable: Yes, Adjusted: Yes/Yes, Allow errors: No, Collision: 604|4]
Boot done 15 sec
[ff3] run warn(50)
[ff3] can't start. Select another DA f.e. base/2316
EMMC Life Ok
Get 1st partition table... Ok 219 us GPT Ok
PGPT 41 entries
Read [preloader]... Ok 297 us
preloader (0) MT6765 preloader_x688b_h659.bin with 20 memory types [8d587d13] slots: no
Read [preloader_backup]... Ok 296 us
preloader (1) MT6765 preloader_x688b_h659.bin with 20 memory types [8d587d13] slots: no
Device has no slots
Probe LK...
lk [c8409d52] x688b_h659-c6978bb65-20221101160310-20230324181130
Device has no slots
Probe boot...
recovery;gzip;ramdisk size 19.40 Mb;2 found
boot;gzip;ramdisk size 1.45 Mb;1 found Ok 968 us
SW: Infinix/X688B-GL/Infinix-X688B:11/RP1A.200720.011/230324V619:user/release-keys
Product Brand: Infinix
Product Device: Infinix-X688B
Product Model: Infinix X688B
Product Name: X688B-GL
Patch Level: RP1A.200720.011
Display ID: X688B-H659ABCDEFGHIJKLMNO-R-GL-230324V619
SW Version: 230324V619
Ver. CodeName: REL
Sec. Patch: 2023-03-05
Build Time: 24/03/2023 10:02:24
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: x688b_h659
SW: vnd_x688b_h659-user 11 RP1A.200720.011 282777 release-keys
Product Board: Infinix-X688B
Board Platform: mt6765
Build: Infinix/X688B-GL/Infinix-X688B:11/RP1A.200720.011/230324V619:user/release-keys
Product Manfct: INFINIX MOBILITY LIMITED
ID: infinix-mobility-limited-infinix-x688b-x688b-gl
Strategy: [infinix]
Firmware ID: MT6765_INFINIX_MOBILITY_LIMITED_Infinix_X688B_OSv11_X688B-H659ABCDEFGHIJKLMNO-R-GL-230324V619_RP1A.200720.011_x688b_h659
Android ver: 11
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6765_INFINIX_MOBILITY_LIMITED_Infinix_X688B_OSv11_X688B-H659ABCDEFGHIJKLMNO-R-GL-230324V619_RP1A.200720.011_x688b_h659]... Exist (1) 1 sec
Probe userdata...
Load userdata... Ok 0 us userData: [FS f2fs] plain
Backup 60 items to C:\InfinityBox\CM2MT2\backup\MT6765__95AEC31501E66B8E7E9A646B4D0BEF43_infinix-mobility-limited-infinix-x688b-x688b-gl\
Read [seccfg] Ok 547 us
Read [nvram] Ok 4 sec
Read [nvdata] Ok 4 sec
Read [proinfo] Ok 235 us
Read [lk] Ok 94 us
Read [nvcfg] Ok 2 sec
Read [protect1] Ok 563 us
Read [pgpt] Ok 16 us
Read [persist] Ok 3 sec
Read [preloader] Ok 297 us
probe files...
Done 10 files 17 sec
Compress: C:\InfinityBox\CM2MT2\backup\MT6765__95AEC31501E66B8E7E9A646B4D0BEF43_infinix-mobility-limited-infinix-x688b-x688b-gl\ Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6765__95AEC31501E66B8E7E9A646B4D0BEF43_infinix-mobility-limited-infinix-x688b-x688b-gl.7z Enough [infinix-mobility-limited-infinix-x688b-x688b-gl] 3 sec
Load nvram...
NVRAM: 162 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 58:10:B7:B8:7A:D2
IMEI1: 351594347813203
IMEI2: 351594347813211
PSN1: 061972516G023145
get modem info... nothing
Secondary RPMB... present
Probe FRP... Most probably Off
Probe bootloader... Seems as locked
Stop [Job 22257088] Connect v2.97 1 min => Keep connection
Start FRP Complete. Erase Userdata v2.97
ID: infinix-mobility-limited-infinix-x688b-x688b-gl
Strategy: [infinix]
Firmware ID: MT6765_INFINIX_MOBILITY_LIMITED_Infinix_X688B_OSv11_X688B-H659ABCDEFGHIJKLMNO-R-GL-230324V619_RP1A.200720.011_x688b_h659
Android ver: 11
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6765__95AEC31501E66B8E7E9A646B4D0BEF43_infinix-mobility-limited-infinix-x688b-x688b-gl.7z
Reset FRP...
reset frp... Ok 15 us
format frp... Ok 94 us
Completed(1)
Reset: Smart... Leave [infinix] intact
Reset: Userdata...
reset userdata...
Create partition image...
Make filesystem [f2fs]... Ok Ok Ok 609 us
reset cache...
Create partition image...
Make filesystem [ext4]... Ok Ok Ok 31 us
reset metadata... Ok 0 us
reset md_udc... Ok 16 us
Reset: Wipe...
set factory wipe/misc... Finished
set factory wipe/para... Ok
If device stuck on boot logo or recovery - make [Fix No Command]
Stop [Job 22257088] FRP Complete. Erase Userdata v2.97 7 sec => Keep connection
Start Reboot v2.97
Reset port...
Trying to reboot...
Stop [Job 22257088] Reboot v2.97 187 us