Z3X INFINIX X657B SMART 5 BAD EMMC HEALTH FIX HANG ON LOGO FIX DONE

Z3X Team

samargsm1

Friend's Martview
Sep 10, 2024
361
1,110
Pakistan
PayPal:

Donate money to this user
INFINIX X657B SMART 5 BAD EMMC HEALTH FIX HANG ON LOGO FIX AFTER FLASH HARD RESET PHONE VIA RECOVREY ALL DONE :O:

TESTED FILE

https://www.mediafire.com/file/h0x2...-S2-220110V765%28MobiFirmware.com%29.zip/file

Selected model: Infinix X657B (Infinix Hot 10 Lite)
Operation: Flash (Download only)
Software version: 9.4

Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM50 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM50 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7243F34A, 0x2B2385E1, 0x0CAD3E34, 0xF396EA71
Get Chip ID... [MT6761]
Get SOC ID... [DECF5D9CB85869EFEB71682301D405FC3FDC7EBF681D881A0FCFAD9249680957]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD6010335384B3732316933810E60B747
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 58K721
EMMC_ID : 0xD6010335384B3732316933810E60B747
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: critical, consumed 90% of reserved blocks
DeviceLifeTimeEstA: 30% - 40% device life time used
DeviceLifeTimeEstB: info not available
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X657B
Product Name : X657B-OP-S2
Product Device : Infinix-X657B
Product Board : Infinix-X657B
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Mon Nov 21 19:11:01 CST 2022
Display ID : X657B-H6117EIKL-RGo-OP-S2-221121V1102
Firmware Version : 221121V777
Userdata FS Type : F2FS
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK "preloder_backup"... OK
Download "tkv"... OK
Download "recovery"... OK
Download "md1img"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "scp2"... OK
Download "sspm_1"... OK
Download "sspm_2"... OK
Download "lk"... OK
Download "lk2"... OK
Download "boot"... OK
Download "logo"... OK
Download "dtbo"... OK
Download "tee1"... OK
Download "tee2"... OK
Download "vbmeta"... OK
Download "vbmeta_system"... OK
Download "vbmeta_vendor"... OK
Download "super"... OK
Download "cache"... OK
Download "tranfs"... OK
Download "userdata"... error(2)



 
Mental and emotional well-being play a vital role in maintaining a healthy and balanced life. Professional mental health services can help individuals manage stress, anxiety, depression, and other challenges that affect daily functioning and overall quality of life. By taking a holistic approach to wellness, individuals can receive support that addresses both physical and emotional health. Through personalized care, healthy lifestyle strategies, and wellness-focused guidance, mental health services can empower people to build resilience, improve coping skills, and achieve long-term well-being. Seeking support is an important step toward creating a healthier and more fulfilling future.
 

lucassene

Junior Member
Jul 22, 2026
2
0
Florida, USA
That log clearly shows the eMMC is in critical condition, so even if flashing gets the phone to boot temporarily, the underlying storage issue is still there. In cases like this, replacing the failing eMMC is usually the more reliable long-term fix instead of repeatedly reflashing the firmware.


The mention of overall health in the previous reply is also relevant in a different context. Mental health deserves the same attention as physical health, and people dealing with depression that hasn't improved with medication may benefit from learning about treatment options such as tms health boca raton, which is a non-invasive therapy used for certain cases of treatment-resistant depression.
 
Top