ive successfully bypass Mini 5 various country and all ios 26.6.1 before then ever vsince the ios 26.6 was not active i cant bypass ios 26.6.1
[*] Checking device state...
[*] No ramdisk SSH - checking DFU/Recovery...
Detected A12/A13 device (iPad11,2) - using Usbliter8 ramdisk boot
Preparing Environment : OK
Check Apple drivers..... ✓..
[*] Cleaning previous USB session state...
[+] PRODUCT: iPad11,2 MODEL: j211ap ECID: 001D513A0AC3002E SRNM: ? CPID: 8020
Preparing usbliter8 bootchain....OK
[+] Selected: Method 1 (iPad11,2-8020.zip)
Preparing RAMDISK payload (iPad11.2 / iPad11,2-8020.zip)....OK
[+] Payload loaded (ibss=0B kernel=20182488B ramdisk=228598714B)
[*] Booting patched iBEC (2238288 B) via usbliter8 CUSTOM_BOOT...
[*] Uploading patched iBEC (2238288 B) via libirecovery...
[*] CUSTOM_BOOT sent, waiting for device to transition...
[!] Please press and hold the POWER button for 2 seconds now.
[*] Waiting for device in recovery...
[+] iBEC booted, device in Recovery.
Preparing Environment : OK
Check Apple drivers..... ✓..
[*] Waiting 3s for iBEC/Recovery to settle...
[+] Recovery identity: ECID=001D513A0AC3002E SRNM=DMPCN29LLMV7 CPID=8020
[*] Setting black (bgcolor 0 0 0)...OK
Sending File (logo).....OK
[*] Setting picture...OK
[!] sptm missing - skipping
[!] txm missing - skipping
Sending File (AOP).....OK
Sending File (ANE).....OK
Sending File (AVE).....OK
Sending File (ISP).....OK
Sending File (GFX).....OK
Sending File (SIO).....OK
[!] PMP missing - skipping
[!] WHC missing - skipping
Sending File (DeviceTree).....OK
Sending File (sep-firmware).....OK
Sending File (trustcache).....OK
Sending File (ramdisk)..... 228598714 B
[*] Uploading 228598714 B via raw irecv (no progress cb)...
[+] Upload complete.
[+] ramdisk cmd OK - md0 registered
Sending File (kernel).....OK
[*] Setting boot-args...OK
[*] Verifying boot-args via irecv_getenv...
[+] iBoot boot-args = "rd=md0 -v debug=0x14e serial=3 wdt=-1 keepsyms=1"
[*] bootx...OK
[+] RAMDISK boot triggered.
[*] Waiting for device to leave Recovery mode...
[+] Device left Recovery after 1s
[?] If it took >15s to leave Recovery: device likely booted
NORMAL iOS via watchdog reset, not the RAMDISK.
Check screen: teal+verbose = ramdisk, Apple logo = iOS.
[*] Establishing SSH (port 22 alpine, 5 attempts)...
P:16..OK
[+] SSH connected on attempt 1 (port cfg 16)
[*] Mounting partitions (Method 1)...
[*] Mounting (host strategy_universal)...
[*] mount System -> /mnt1
[*] scan disk1s3..s7 (Preboot/xART/Hardware)...
[*] volumes: mnt6=Y mnt7=84EC82BC-C5F5-5E19-976F-EBD34C20923E.gl mnt4=Y
[*] seputil gigalocker-init...
[*] seputil --load /mnt6/31A7939F98C66749A7B0AE2EF5853B60DB6E8D49B098C57F7DECF42E990CEAFEAD937F36AA71CC31D0AA9D705FEDB14C/usr/standalone/firmware/sep-firmware.img4
[+] seputil --load finished
[*] mount Data -> /mnt2
[+] Data mounted
[+] mount done
[+] Partitions Mounted Successfully!
[*] Activate Hello (ramdisk)...
[+] Hello identity: ECID=001D513A0AC3002E SRNM=DMPCN29LLMV7 CPID=8020
[*] Hello No Change: ecid=001D513A0AC3002E sn=DMPCN29LLMV7 cpid=8020
[*] Generating Activation Files...
[-] Seed activation failed
[!] Final activation response invalid
[!] Activation files download failed
[*] Regenerating activation files...
[*] Generating Activation Files...
[-] Seed activation failed
[!] Final activation response invalid
[!] Activation files download failed
[-] Failed to generate activation files
[-] Activate Hello failed
Operation {Boot Passcode/Hello IOS 11.x Up 26.x One Click} ID: 57DB87DA3D974827
Elapsed time 03:29 -- Version 5.5.7 Release 0826 Build 712
[*] Checking device state...
[*] No ramdisk SSH - checking DFU/Recovery...
Detected A12/A13 device (iPad11,2) - using Usbliter8 ramdisk boot
Preparing Environment : OK
Check Apple drivers..... ✓..
[*] Cleaning previous USB session state...
[+] PRODUCT: iPad11,2 MODEL: j211ap ECID: 001D513A0AC3002E SRNM: ? CPID: 8020
Preparing usbliter8 bootchain....OK
[+] Selected: Method 1 (iPad11,2-8020.zip)
Preparing RAMDISK payload (iPad11.2 / iPad11,2-8020.zip)....OK
[+] Payload loaded (ibss=0B kernel=20182488B ramdisk=228598714B)
[*] Booting patched iBEC (2238288 B) via usbliter8 CUSTOM_BOOT...
[*] Uploading patched iBEC (2238288 B) via libirecovery...
[*] CUSTOM_BOOT sent, waiting for device to transition...
[!] Please press and hold the POWER button for 2 seconds now.
[*] Waiting for device in recovery...
[+] iBEC booted, device in Recovery.
Preparing Environment : OK
Check Apple drivers..... ✓..
[*] Waiting 3s for iBEC/Recovery to settle...
[+] Recovery identity: ECID=001D513A0AC3002E SRNM=DMPCN29LLMV7 CPID=8020
[*] Setting black (bgcolor 0 0 0)...OK
Sending File (logo).....OK
[*] Setting picture...OK
[!] sptm missing - skipping
[!] txm missing - skipping
Sending File (AOP).....OK
Sending File (ANE).....OK
Sending File (AVE).....OK
Sending File (ISP).....OK
Sending File (GFX).....OK
Sending File (SIO).....OK
[!] PMP missing - skipping
[!] WHC missing - skipping
Sending File (DeviceTree).....OK
Sending File (sep-firmware).....OK
Sending File (trustcache).....OK
Sending File (ramdisk)..... 228598714 B
[*] Uploading 228598714 B via raw irecv (no progress cb)...
[+] Upload complete.
[+] ramdisk cmd OK - md0 registered
Sending File (kernel).....OK
[*] Setting boot-args...OK
[*] Verifying boot-args via irecv_getenv...
[+] iBoot boot-args = "rd=md0 -v debug=0x14e serial=3 wdt=-1 keepsyms=1"
[*] bootx...OK
[+] RAMDISK boot triggered.
[*] Waiting for device to leave Recovery mode...
[+] Device left Recovery after 1s
[?] If it took >15s to leave Recovery: device likely booted
NORMAL iOS via watchdog reset, not the RAMDISK.
Check screen: teal+verbose = ramdisk, Apple logo = iOS.
[*] Establishing SSH (port 22 alpine, 5 attempts)...
P:16..OK
[+] SSH connected on attempt 1 (port cfg 16)
[*] Mounting partitions (Method 1)...
[*] Mounting (host strategy_universal)...
[*] mount System -> /mnt1
[*] scan disk1s3..s7 (Preboot/xART/Hardware)...
[*] volumes: mnt6=Y mnt7=84EC82BC-C5F5-5E19-976F-EBD34C20923E.gl mnt4=Y
[*] seputil gigalocker-init...
[*] seputil --load /mnt6/31A7939F98C66749A7B0AE2EF5853B60DB6E8D49B098C57F7DECF42E990CEAFEAD937F36AA71CC31D0AA9D705FEDB14C/usr/standalone/firmware/sep-firmware.img4
[+] seputil --load finished
[*] mount Data -> /mnt2
[+] Data mounted
[+] mount done
[+] Partitions Mounted Successfully!
[*] Activate Hello (ramdisk)...
[+] Hello identity: ECID=001D513A0AC3002E SRNM=DMPCN29LLMV7 CPID=8020
[*] Hello No Change: ecid=001D513A0AC3002E sn=DMPCN29LLMV7 cpid=8020
[*] Generating Activation Files...
[-] Seed activation failed
[!] Final activation response invalid
[!] Activation files download failed
[*] Regenerating activation files...
[*] Generating Activation Files...
[-] Seed activation failed
[!] Final activation response invalid
[!] Activation files download failed
[-] Failed to generate activation files
[-] Activate Hello failed
Operation {Boot Passcode/Hello IOS 11.x Up 26.x One Click} ID: 57DB87DA3D974827
Elapsed time 03:29 -- Version 5.5.7 Release 0826 Build 712