usbliter8 device used is USB-C <-> USB-C type.
First step is backup, after this is Erase and end one is Restore ... After this you can manualy reset device - do not scare - all be fine FMI will not come back.
First step is backup, after this is Erase and end one is Restore ... After this you can manualy reset device - do not scare - all be fine FMI will not come back.
Code:
[*] Checking device state...
[*] No ramdisk SSH - checking DFU/Recovery...
Detected A12/A13 device (iPhone12,1) - using Usbliter8 ramdisk boot
Preparing Environment : OK
Check Apple drivers..... ✓..
[*] Cleaning previous USB session state...
[+] PRODUCT: iPhone12,1 MODEL: n104ap ECID: 00192C5C3A4xxx2E SRNM: ? CPID: 8030
[+] Selected: Method 1 (iPhone12,1-8030.zip)
[+] Payload loaded (ibss=0B kernel=20666620B ramdisk=228598714B)
[*] Booting patched iBEC (2498632 B) via usbliter8 CUSTOM_BOOT...
[*] Uploading patched iBEC (2498632 B) via libirecovery...
[*] CUSTOM_BOOT sent, waiting for device to transition...
[!] Please press and hold the POWER button for 2 seconds now.
[*] Waiting for device in recovery...
[+] iBEC booted, device in Recovery.
Preparing Environment : OK
Check Apple drivers..... ✓..
[*] Waiting 3s for iBEC/Recovery to settle...
[+] Recovery identity: ECID=00192C5C3A46402E SRNM=DX3F856SxxxG CPID=8030
[*] Setting black (bgcolor 0 0 0)...OK
Sending File (logo).....OK
[*] Setting picture...OK
[!] sptm missing - skipping
[!] txm missing - skipping
Sending File (AOP).....OK
Sending File (ANE).....OK
Sending File (AVE).....OK
Sending File (ISP).....OK
Sending File (GFX).....OK
Sending File (SIO).....OK
Sending File (PMP).....OK
Sending File (WHC).....OK
Sending File (DeviceTree).....OK
Sending File (sep-firmware).....OK
Sending File (trustcache).....OK
Sending File (ramdisk)..... 228598714 B
[*] Uploading 228598714 B via raw irecv (no progress cb)...
[+] Upload complete.
[+] ramdisk cmd OK - md0 registered
Sending File (kernel).....OK
[*] Setting boot-args...OK
[*] Verifying boot-args via irecv_getenv...
[+] iBoot boot-args = "rd=md0 -v debug=0x14e serial=3 wdt=-1 keepsyms=1"
[*] bootx...OK
[+] RAMDISK boot triggered.
[*] Waiting for device to leave Recovery mode...
[+] Device left Recovery after 1s
[?] If it took >15s to leave Recovery: device likely booted
NORMAL iOS via watchdog reset, not the RAMDISK.
Check screen: teal+verbose = ramdisk, Apple logo = iOS.
[*] Establishing SSH (port 22 alpine, 5 attempts)...
P:16..OK
[+] SSH connected on attempt 1 (port cfg 16)
[*] Mounting partitions (Method 1)...
[*] Mounting (host strategy_universal)...
[*] mount System -> /mnt1
[*] scan disk1s3..s7 (Preboot/xART/Hardware)...
[*] volumes: mnt6=Y mnt7=366D7391-84BD-5D81-BA2E-EC3771BDD281.gl mnt4=Y
[*] seputil gigalocker-init...
[*] seputil --load /mnt6/3584E3E5698A00DDC4CA1ADD7B4F79A2486FC450C7442EBCE9C2DEA18AF0DB5D26CB37772BA4BF2EA62CBDDC4A8E1ABF/usr/standalone/firmware/sep-firmware.img4
[+] seputil --load finished
[*] mount Data -> /mnt2
[+] Data mounted
[+] mount done
[+] Partitions Mounted Successfully!
[*] Restore Passcode...
Checking iDevices.....OK
Checking SSH......P:16..OK
Waiting for server.....OK
BuildID : 63871592-96CA-11F1-8EFA-2A0AB46447B3
ProductBuildVersion : 23G83
ProductName : iPhone OS
ProductVersion : 26.6.1
Activation Files Restoring .......OK
Skip Setup...OK
Disable Reset Settings and Updates....OK