j100h dead

Yulduz Gsm

Active Member
Dec 8, 2016
43
87
Karachi
some times j1 will blank lcd after wrong flash
insert recharged battery press and hold (vol down Home Key And power button for 10 seconds and release all buttons and press vol up once and connect if pone is connected then flash with smartswitch...... if not connect then you have to open mobile use jtag box
 

Sheraziking110

Active Member
Nov 29, 2016
70
112
hafizabad
Skype
akkishah512
Sonork ID
100.1659206
eMMC_tool Suite ver. 1.0.0.46
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 2.8V
Setting frequence to 14 Mhz
HiPower mode is OFF
EasyJTAG Box Serial =
Card Serial =
EasyJTAG Box Firmware = 01.58

Changelog:

16.05.2017 (ver 1.0.0.46)
Fix: Bugs that have been found through your crash report
Add: Scanning PIT from eMMC (Explorer)
Add: Scanning from MassStorage (E-MATE / KET / QC_9006)
01.05.2017 (ver 1.0.0.45)
Fix: Bugs that have been found through your crash report
Add: eMMC chip name identification from cid (Preloader parser)

HiPower mode is OFF
CMD Pullup Level: 2660 mV
CMD Active Level: 2753 mV
EMMC Device Information :
EMMC CID: 90014A48344732621101FFCA4CB822AE
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H4G2b , S/N: FFCA4CB8 , rev. 01
EMMC NAME (HEX): 483447326211
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H4G2b_FFCA4CB8_20170521_174253.extcsd
EMMC Init completed.

Opening file: j13g_HIDDEN_140M.pit

Pit: j13g_HIDDEN_140M.pit
Entry count: 56206544

The size of the last section has been updated

AP_J100HXCU0AOD5_CL361540_QB4809815_REV01_user_low_ship.tar.md5
The list of files in the firmware:
boot.img
recovery.img
system.img

BL_J100HXCU0AOD5_CL361540_QB4809815_REV01_user_low_ship.tar.md5
The list of files in the firmware:
spl.img
sboot.bin
sboot2.bin
param.lfs

CP_J100HXCU0AOE1_CL361540_QB4879550_REV01_user_low_ship.tar.md5
The list of files in the firmware:
sprdcp.img
sprddsp.img
nvitem.bin

CSC_VFG_J100HVFG0AOE1_CL571249_QB4917266_REV01_user_low_ship.tar.md5
The list of files in the firmware:
j13g_hidden_140m.pit
cache.img
hidden.img

HiPower mode is OFF
CMD Pullup Level: 2660 mV
CMD Active Level: 2753 mV
EMMC Device Information :
EMMC CID: 90014A48344732621101FFCA4CB822AE
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H4G2b , S/N: FFCA4CB8 , rev. 01
EMMC NAME (HEX): 483447326211
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H4G2b_FFCA4CB8_20170521_174326.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000080000
GPT-partitioning done

Unpacking file: spl.img
Unpacking file: sboot.bin
Unpacking file: sboot2.bin
Unpacking file: nvitem.bin
Unpacking file: sprddsp.img
Unpacking file: sprdcp.img
Unpacking file: param.lfs
Unpacking file: boot.img
Unpacking file: recovery.img
Unpacking file: cache.img
Unpacking file: system.img
Unpacking file: hidden.img

Partition name: BOOT
Filename: spl.img , Offset: 000000000000 , filesize: 32768 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 246.32 Kb/s
Partition name: SBOOT
Filename: sboot.bin , Offset: 000000400000 , filesize: 1573888 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1087.63 Kb/s
Partition name: SBOOT2
Filename: sboot2.bin , Offset: 000000600000 , filesize: 1573888 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1087.53 Kb/s
Partition name: WFIXNV2
Filename: nvitem.bin , Offset: 000000900000 , filesize: 174864 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 825.18 Kb/s
Partition name: WDSP
Filename: sprddsp.img , Offset: 000000C00000 , filesize: 1968128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1154.68 Kb/s
Partition name: MODEM
Filename: sprdcp.img , Offset: 000001000000 , filesize: 7483856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 829.91 Kb/s
Partition name: PARAM
Filename: param.lfs , Offset: 000002900000 , filesize: 634880 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 742.82 Kb/s
Partition name: KERNEL
Filename: boot.img , Offset: 000004500000 , filesize: 5665792 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 832.73 Kb/s
Partition name: RECOVERY
Filename: recovery.img , Offset: 000005500000 , filesize: 6996992 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 833.08 Kb/s
Partition name: CSC
Filename: cache.img , Offset: 000006500000 , filesize: 30970128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 15
Done writing partition. Write speed: 904.08 Kb/s
Partition name: SYSTEM
Filename: system.img , Offset: 000012D00000 , filesize: 978499424 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 1652
Done writing partition. Write speed: 769.56 Kb/s
Partition name: HIDDEN
Filename: hidden.img , Offset: 000053D00000 , filesize: 108979296 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 68
Done writing partition. Write speed: 823.98 Kb/s

All done
 
Top