JAZZ DIGIT 4G ELITE PATTERN FRP UNLOCK DONE 
Selected model: Digit 4G Power
Operation: Erase FRP And Wipe
Software version: 9.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM212 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM110 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDD52CE5C, 0x864BC1F4, 0x1BC1303C, 0xB4E8445C
Get Chip ID... [MT6739]
Get SOC ID... [2A4A8788B502F616B315770B4755DB8851103B7D5C69B520C31AEECDF700A9F1]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A483847346132A5C0228CA7C531
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: H8G4a2
EMMC_ID : 0x90014A483847346132A5C0228CA7C531
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x01D2000000 (7.28Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Digit
Product Manufacturer : Digit
Product Model : Digit4G E2 PRO
Product Name : Digit4G_E2_PRO
Product Device : Digit4G_E2_PRO
Product Board : k31v1_bsp_512
Board Platform : MTK6739_8.1
Build ID : O21020
Build Date : Wed Sep 20 22:42:13 CST 2023
Display ID : DigitOS8_M42481DG_SW09_20230920
Security Patch : 2021-08-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1695220936
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Digit_4G%20Power/FRP_BACKUP_(2025-10-2_16-51-17)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Creating default filesystems... [USERDATA: F2FS] ... [CACHE: EXT4] ... OK
Wipe data done!
Selected model: Digit 4G Power
Operation: Erase FRP And Wipe
Software version: 9.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM212 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM110 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDD52CE5C, 0x864BC1F4, 0x1BC1303C, 0xB4E8445C
Get Chip ID... [MT6739]
Get SOC ID... [2A4A8788B502F616B315770B4755DB8851103B7D5C69B520C31AEECDF700A9F1]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A483847346132A5C0228CA7C531
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: H8G4a2
EMMC_ID : 0x90014A483847346132A5C0228CA7C531
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x01D2000000 (7.28Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Digit
Product Manufacturer : Digit
Product Model : Digit4G E2 PRO
Product Name : Digit4G_E2_PRO
Product Device : Digit4G_E2_PRO
Product Board : k31v1_bsp_512
Board Platform : MTK6739_8.1
Build ID : O21020
Build Date : Wed Sep 20 22:42:13 CST 2023
Display ID : DigitOS8_M42481DG_SW09_20230920
Security Patch : 2021-08-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1695220936
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Digit_4G%20Power/FRP_BACKUP_(2025-10-2_16-51-17)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Creating default filesystems... [USERDATA: F2FS] ... [CACHE: EXT4] ... OK
Wipe data done!
