JNY-LX1 SD UPDATE WHILE DEAD RECOVERY DONE

[naina mohamed]

Please login to view image

Job ID: 0000000001D9F041
2021-11-21 12:46:13 GMT -------------------------------------------------
Starting Write Firmware(Factory mode)
Selected phone model: ‪JNY-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN810_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7VMG2139001902

Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 10.1.0.361(C185E5R6P1)‬
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Writing PTABLE partition...



Writing PTABLE partition...
Writing XLOADER partition...
Writing FASTBOOT partition...
Writing BOOT partition...
Writing DTBO partition...
Writing VECTOR partition...
Writing FW_LPM3 partition...
Writing HHEE partition...
Writing VBMETA partition...
Writing TEEOS partition...
Writing TRUSTFIRMWARE partition...
Writing SENSORHUB partition...
Writing FW_HIFI partition...
Writing MODEMNVM_UPDATE partition...
Writing MODEMNVM_CUST partition...
Writing RECOVERY partition...
Writing RECOVERY_RAMDISK partition...
Writing RECOVERY_VENDOR partition...
Writing RECOVERY_VBMETA partition...
Writing PREAS partition...
Writing PREAVS partition...
Writing ERECOVERY partition...
Writing ERECOVERY_RAMDISK partition...
Writing ERECOVERY_VENDOR partition...
Writing ERECOVERY_VBMETA partition...
Writing ENG_VENDOR partition...
Writing ENG_SYSTEM partition...
Writing CACHE partition...
Writing RAMDISK partition...
Writing SUPER partition...
Writing SUPER partition...
Writing 1 chunk from 9...
Writing 2 chunk from 9...
Writing 3 chunk from 9...
Writing 4 chunk from 9...
Writing 5 chunk from 9...
Writing 6 chunk from 9...
Writing 7 chunk from 9...
Writing 8 chunk from 9...
Writing 9 chunk from 9...
Writing METADATA partition...
Writing VBMETA_SYSTEM partition...
Writing VBMETA_VENDOR partition...
Writing VBMETA_ODM partition...
Writing VBMETA_HW_PRODUCT partition...
Writing VBMETA_CUST partition...
Writing ISP_FIRMWARE partition...
Writing MODEM_FW partition...
Writing NPU partition...
Writing HISEE_IMG partition...
Writing VERSION partition...
Writing PRELOAD partition...
Writing PATCH partition...
Writing KPATCH partition...
Writing MODEM_DRIVER partition...
Erasing ‪USERDATA‬ partition..
Writing USERDATA partition...

Writing VERSION partition...

Writing PRELOAD partition...
Writing 1 chunk from 2...
Writing 2 chunk from 2...

Switching to Upgrade Mode...
Writing ERECOVERY files...
Warning: Writing rescue_recovery_boot partition

JNY-LX1 AFTER SD UPDATE DEAD

KING OCTOPUS HUAWEI TOOL RECOVER MY SET WITH MODIFIED CABLE JOB DONE

ALHAMDULILLAH

 

[AK Mohammad]

Flash via factory mode with latest firmware on usb com 1.0 It will be fine

 

[luyanda]

Hi bro you mean no need to do fastboot with sigmakey?

 

[luyanda]

Flash via factory mode with latest firmware on usb com 1.0 It will be fine

Welcome to Octoplus Huawei Software v.‪1.3.2.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM8 HUAWEI USB COM 1.0
2: COM1 Communications Port
3: COM35 RIM Virtual Serial Port v2
4: COM36 RIM Virtual Serial Port v2

Job ID: 00000000018CB706
2022-08-11 09:19:35
Starting Write Firmware(Factory mode)
Selected phone model: ‪JNY-LX1‬
Canceling... Please be patient!
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Write Firmware(Factory mode) canceled.
Performed by ‪1.3.2.3‬ Software version.

Job ID: 00000000018CB747
2022-08-11 09:22:10
Starting Write Firmware(Factory mode)
Selected phone model: ‪JNY-LX1‬
Selected base ptable file: D:/HUAWEI FILES/FRP DOWNGRADE/JNY-L21 10.0.1.167(C185E3R3P1)_Firmware_EMUI10.0.1_05016NTA File By (Support.HalabTech.Com)/Software/dload/update_sd_base/PTABLE.APP
Selected cust ptable file: D:/HUAWEI FILES/FRP DOWNGRADE/JNY-L21 10.0.1.167(C185E3R3P1)_Firmware_EMUI10.0.1_05016NTA File By (Support.HalabTech.Com)/Software/dload/JNY-L21_hw_meafnaf/update_sd_cust_JNY-L21_hw_meafnaf/PTABLE.APP
Selected preload ptable file: D:/HUAWEI FILES/FRP DOWNGRADE/JNY-L21 10.0.1.167(C185E3R3P1)_Firmware_EMUI10.0.1_05016NTA File By (Support.HalabTech.Com)/Software/dload/JNY-L21_hw_meafnaf/update_sd_preload_JNY-L21_hw_meafnaf_R3/PTABLE.APP
Selected base update file: D:/HUAWEI FILES/FRP DOWNGRADE/JNY-L21 10.0.1.167(C185E3R3P1)_Firmware_EMUI10.0.1_05016NTA File By (Support.HalabTech.Com)/Software/dload/update_sd_base/UPDATE.APP
Selected cust update file: D:/HUAWEI FILES/FRP DOWNGRADE/JNY-L21 10.0.1.167(C185E3R3P1)_Firmware_EMUI10.0.1_05016NTA File By (Support.HalabTech.Com)/Software/dload/JNY-L21_hw_meafnaf/update_sd_cust_JNY-L21_hw_meafnaf/UPDATE.APP
Selected preload base file: D:/HUAWEI FILES/FRP DOWNGRADE/JNY-L21 10.0.1.167(C185E3R3P1)_Firmware_EMUI10.0.1_05016NTA File By (Support.HalabTech.Com)/Software/dload/JNY-L21_hw_meafnaf/update_sd_preload_JNY-L21_hw_meafnaf_R3/UPDATE.APP
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
PACKAGE_TYPE: OFFLINE_UPDATE
Selected method: Write firmware (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Write Firmware(Factory mode) failed.
Performed by ‪1.3.2.3‬ Software version.
it failed any help