Abdullah

Staff member
Super Moderator
Oct 22, 2016
1,345
3,158
Pakistan
PayPal:

Donate money to this user
JPD One S MEIGU AT8801 MT6735 Firmware | Flash File | NVRAM + SEC Backup

Avengers Box Log:
EMMC: (233Gb+16384Mb) SAMSUNG 0x51345a334d42
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 15010051345A33 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Build ID: LMY47D
Display ID: AT8801 20161116-180522
Version: 5.1
Build Date: Wed Nov 16 18:12:07 CST 2016
Model: AT8801
Brand: MEIGU
Device: AT8801
Manufacturer: MEIGU
Region: US
Mediatek Version Release: ALPS.L1.MP3.V2.95_VZ6735.35GT.VA.L1_P72
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 865155021045667
IMEI[2] from NVRAM: 865155021045667
Start procesing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start procesing trustzone
Start procesing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start procesing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start procesing system
Reading: BEGIN: 0xb000000 - LEN: 0x60000000
Saved to :
MT6735_EMMC_MEIGU_AT8801_5_1_ALPS_L1_MP3_V2_95_VZ6735_35GT_VA_L1_P72(2017_12_23_12_18)
Wait untill phone will start charging.
All done
MT6735_EMMC_LMY47D__5_1_AT8801_MEIGU_SEC_Backup
META_MODE_NVRAM_MT6735_AT8801_12_23_2017_12_24_27

=====================================================

China Miracle II CM2 LoG:
Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D335A341397024295071DC8
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM3Z4
[eMMC] : FLASH_CID : 15010051345A334D42029713C81D7395
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0x0D22E2288109FF22754935589C990A65
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : MEIGU
ProdName : AT8801
ProdModel : AT8801
Device : AT8801
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : ALPS.L1.MP3.V2.95_VZ6735.35GT.VA.L1_P72

[Read Ok] : preloader_n625al.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / n625al / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1474 MiB
Scatter saved to :
MT6735__MEIGU__AT8801__AT8801__5.1__ALPS.L1.MP3.V2.95_VZ6735.35GT.VA.L1_P72
preloader_n625al.bin (140Kb)

AT8801 | Marhaba Firmware
 
Last edited by a moderator:
Top