Selected model: Tecno KJ5 (Tecno Spark 20)
Operation: Flash (Download only)
Software version: 9.25
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM26 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x2A312DF5, 0x893BDD9D, 0xC6DB1EB4, 0xB6EA16D1
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC128
EMMC_ID : 0xD62D004D4D43313238510DA5B25D8A11
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1D20500000 (116.50Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KJ5
Product Name : KJ5-OP
Product Device : TECNO-KJ5
Product Board : TECNO-KJ5
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Mon Jul 22 15:30:42 CST 2024
Firmware Version : 240722V1315
Userdata FS Type : F2FS
Read super info... OK
WARNING!!! BROM disabled by EFUSE. Continue? YES
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "logo_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "super" part 1... file not found!
C:\Users\pc home\Desktop\R2-Tecno-Spark-20-KJ5-26\super.img
Download "tkv_a"... OK
Download "tkv_b"... OK
Download "tranfs"... OK
Download "userdata"... OK
Switch slot to [A] ... error(-1073610740)
Operation: Flash (Download only)
Software version: 9.25
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM26 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x2A312DF5, 0x893BDD9D, 0xC6DB1EB4, 0xB6EA16D1
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC128
EMMC_ID : 0xD62D004D4D43313238510DA5B25D8A11
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1D20500000 (116.50Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KJ5
Product Name : KJ5-OP
Product Device : TECNO-KJ5
Product Board : TECNO-KJ5
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Mon Jul 22 15:30:42 CST 2024
Firmware Version : 240722V1315
Userdata FS Type : F2FS
Read super info... OK
WARNING!!! BROM disabled by EFUSE. Continue? YES
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "logo_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "super" part 1... file not found!
C:\Users\pc home\Desktop\R2-Tecno-Spark-20-KJ5-26\super.img
Download "tkv_a"... OK
Download "tkv_b"... OK
Download "tranfs"... OK
Download "userdata"... OK
Switch slot to [A] ... error(-1073610740)