- Nov 21, 2019
- 59
- 32
Welcome to Octoplus/Octopus Box LG Software version 3.2.4
Card S/N : 000000F0B2
--------------------------------------------------------------------------------
Work ID: 00000000018E6288
Checking data...OK
Platform: LG Qualcomm
Selected port: COM428
Selected model: M150
Please, put the phone into download mode manually (Power phone OFF
(reconnect battery), press and hold "Vol+" button and connect the cable
(or P999 cable)).
Reading info...
Model ID: LG-M150
IMEI: 353712-09-306907-1
Android version: 7.0
Battery level: 72%
Mode: Emergency
Initializing flash...OK
Platform: msm8909
SW version: LGM150AT-00-V20p-ATT-US-MAR-13-2019-ARB02+0
Android version: 7.0
LAF Version: 1.1
Product ID: VS03S171024002146
IMEI: 353712-09-306907-1
Target operator: ATT
Hardware: rev_10
Reset FRP operation for M150 will delete all user data on the phone
(contacts, pictures and others)!
Do You want to continue?
Reading partitions...OK
Detecting writing method...
Trying third method...Failed!
Reading partitions...OK
Connecting to server 0...OK
Octopus smart card is present.
Checking smart card...OK
Username: pru6mv4
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 125 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Backup saved to "M150_353712093069071_26-02-2024_14-40-22.oct"
Reading partitions...OK
Prepairing for change protect status...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Power phone OFF and put it to Download mode.
3. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Initializing flash...OK
Removing write protection...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Wait until phone power ON.
3. Complete all startup settings.
4. Power phone OFF and put it to Download mode.
5. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Note: If You will cancel operation or it wasn't completed full, the device
may not work properly.
The operation must be performed and completed according to Software
instructions!OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...
Reading partitions...OK
Restore write protection...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Power phone OFF and put it to Download mode.
3. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Initializing flash...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Wait until phone power ON.
3. Complete all startup settings.
4. Power phone OFF and put it to Download mode.
5. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Note: If You will cancel operation or it wasn't completed full, the device
may not work properly.
The operation must be performed and completed according to Software
instructions!
Failed!
Performed by 3.2.4 Software version.
--------------------------------------------------------------------------------
Connecting to server 0...OK
Username: pru6mv4
Authorizing...OK
Checking balance...OK
Your balance: 25 credits.
Hello team, this operation has failed and the phone is bricked and cannot even go into download mode. Credit is deducted please refund it to me, my is user name - pru6mv4
Card S/N : 000000F0B2
--------------------------------------------------------------------------------
Work ID: 00000000018E6288
Checking data...OK
Platform: LG Qualcomm
Selected port: COM428
Selected model: M150
Please, put the phone into download mode manually (Power phone OFF
(reconnect battery), press and hold "Vol+" button and connect the cable
(or P999 cable)).
Reading info...
Model ID: LG-M150
IMEI: 353712-09-306907-1
Android version: 7.0
Battery level: 72%
Mode: Emergency
Initializing flash...OK
Platform: msm8909
SW version: LGM150AT-00-V20p-ATT-US-MAR-13-2019-ARB02+0
Android version: 7.0
LAF Version: 1.1
Product ID: VS03S171024002146
IMEI: 353712-09-306907-1
Target operator: ATT
Hardware: rev_10
Reset FRP operation for M150 will delete all user data on the phone
(contacts, pictures and others)!
Do You want to continue?
Reading partitions...OK
Detecting writing method...
Trying third method...Failed!
Reading partitions...OK
Connecting to server 0...OK
Octopus smart card is present.
Checking smart card...OK
Username: pru6mv4
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 125 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Backup saved to "M150_353712093069071_26-02-2024_14-40-22.oct"
Reading partitions...OK
Prepairing for change protect status...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Power phone OFF and put it to Download mode.
3. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Initializing flash...OK
Removing write protection...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Wait until phone power ON.
3. Complete all startup settings.
4. Power phone OFF and put it to Download mode.
5. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Note: If You will cancel operation or it wasn't completed full, the device
may not work properly.
The operation must be performed and completed according to Software
instructions!OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...
Reading partitions...OK
Restore write protection...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Power phone OFF and put it to Download mode.
3. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Initializing flash...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Wait until phone power ON.
3. Complete all startup settings.
4. Power phone OFF and put it to Download mode.
5. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Note: If You will cancel operation or it wasn't completed full, the device
may not work properly.
The operation must be performed and completed according to Software
instructions!
Failed!
Performed by 3.2.4 Software version.
--------------------------------------------------------------------------------
Connecting to server 0...OK
Username: pru6mv4
Authorizing...OK
Checking balance...OK
Your balance: 25 credits.
Hello team, this operation has failed and the phone is bricked and cannot even go into download mode. Credit is deducted please refund it to me, my is user name - pru6mv4