LG G3 Dead Boot Repair Without Box

Kashi Lucky

Read-only
Dec 5, 2016
563
1,834
Pakistan
Sonork ID
100.1677449
LG G3 Dead Boot Repair Success Without Box
LG G3 Model Supported


LG AS990
LG D850
LG D851
LG D857
LG D858
LG D858HK
LG D859
LG L24
LG LS990
LG US990
LG VS985


How To Write this Procedure Check Step By Step

1 : Run Smart Boot Diagnosis Tool
2 : Select Model Info and Press yes



3 : Check Anti-RollBack Result
4 : If Failis Over 1 Item Select yes



5 : Select The Recover Folder
6 : Select Ok



7 : Flash Procedure Start


Flash File Here
Download

Flasher Here
Download

Driver Here
Download


Only Press Thanks ButtoN
 

rana shahzad

Member
Dec 7, 2016
11
4
karachi
If You Are On Situation “LGE AndroidNet USB port” You To Need To Change “LGE AndroidNet USB port” To “Qualcomm 9008”

LG G3 Unbrick Requirements:
QDLoader_HS-USB_Driver_32bit_Setup.zip
QDLoader_HS-USB_Driver_64bit_Setup.zip
BoardDiag_v2.99a_modified_GsmMArhaba.rar
LG G3 Official TOT Firmware
Visual C++ Redistributable


0. Install Qualcomn Drivers.
1. Visual C++ Redistributable.
2. open the phone.
3. On Mother Board Remove The Cover Of “eMMC”.
4. Short test point with ground without the battery and Connect USB Cable Test points may be different in different boards so please search test point for you model or post in comments i will try to find for you.
- if You allready have “Qualcomm 9008” Port then no need to Open Phone.
5. Connect With PC WithOut Battary

Fixing “Qualcomm HS-USB QDLoader 9008”
How To Unbrick LG G3 Hard bricked Phone?

1. Extract Rar Of BoardDiag And Run It.
2. Download ToT firmware file for your phone.
3. Make sure you have extracted Correct ToT File.
4. Put ToT file in BIN.
5. Set Directory (where ToT File Will Extract) DIR.
6. Click On Extract Button.
Boot Repair
1. Choose “Chipset” For G3 Choose B2
2. Select Correct COM Port Which Shows in Device Manager i.e, (COM20)
3. Select Source Of file Where ToT file Extracted
4. Tick Into “AP Test” And “EMMC TEST”
5. Click On Start

After Both Test Passed Choose Restore Option And Restore These Files One by One In this sequence
Note: Don’t Change the Sequence

1). Boot
2). Aboot
3). BackupGpt
4). Boot
5). dbi
6). laf
7). PrimaryGpt
8). Recovery
9). rpm
10).tz
11).sbl1
Finished

After Complete Disconnect Phone And Insert Battery
If Your Phone Boot Up You Have Success
Then Boot Into Download Mode And Flash ToT File With LG Flash Tool.

IF Get Success Then Like & Share And Leave Comments If You Face Any Problem.
 

tgasjoblow

Active Member
Mar 17, 2017
19
18
phillipines
LG G3 Dead Boot Repair Success Without Box
LG G3 Model Supported


LG AS990
LG D850
LG D851
LG D857
LG D858
LG D858HK
LG D859
LG L24
LG LS990
LG US990
LG VS985


How To Write this Procedure Check Step By Step

1 : Run Smart Boot Diagnosis Tool
2 : Select Model Info and Press yes



3 : Check Anti-RollBack Result
4 : If Failis Over 1 Item Select yes



5 : Select The Recover Folder
6 : Select Ok



7 : Flash Procedure Start


Flash File Here
Download

Flasher Here
Download

Driver Here
Download

Only Press Thanks ButtoN
NICE AND USEFULL POST... GOOD JOB SIR,
 

K-B MOBILE

Active Member
Mar 28, 2017
65
41
Pakistan Sindh
Skype
khalid.hussain0002
Sonork ID
03023270002
Dear Sir I Have LG D851 in Dead Boot Repair Problem,
I Have Try With This Software But Not Success can you help me
 
Top