Medusa Medusa PRO v.2.2.5.3

Medusa Box

GsmToto

Super Moderator
Jan 1, 2021
5,393
22,124
UK
Skype
gsmtoto
Sonork ID
100.1684601

Medusa PRO v.2.2.5.3 is out!
Medusa PRO v.2.2.5.3 Release Notes:

- UFS 4.0 PWM-1, 2, 3 and HS G1 support added.
- Fixed a bug in EMMC operation for Medusa PRO II.
- Fixed a bug in MTK scatter operation EMMC.
- Added support for the "Sahara v3 protocol".
- Fixed a bug in "Reading build info".
- Fixed "Repair Samsung devices using factory files".
- Improved disconnect button for USB.
- Other minor improvements were introduced.


Medusa - Ultimate Breakthrough in the Phone Repair!
 
  • Like
Reactions: FAROK and SPYROS

Saaquib124

Junior Member
Jan 4, 2023
4
0
Mumbai

Medusa PRO v.2.2.5.3 is out!
Medusa PRO v.2.2.5.3 Release Notes:

- UFS 4.0 PWM-1, 2, 3 and HS G1 support added.
- Fixed a bug in EMMC operation for Medusa PRO II.
- Fixed a bug in MTK scatter operation EMMC.
- Added support for the "Sahara v3 protocol".
- Fixed a bug in "Reading build info".
- Fixed "Repair Samsung devices using factory files".
- Improved disconnect button for USB.
- Other minor improvements were introduced.


Medusa - Ultimate Breakthrough in the Phone Repair!
SAMSUNG A528B U7 FRP RESET DONE BUT FRP LOCK NOT REMOVE FROM PHONE
I ALSO ERASED PERSISTENT PARTITION BUT IT ALSO NOT WORK

Started.
Loading firmware. Please wait... Done.
Selected UFS interface.
Socket detected!

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : HS Gear 1

Connecting to server. Please wait...
Connection to server successful
Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS failure ...

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : PWM Gear 4

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS failure ...

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : PWM Gear 4

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS failure ...
Reloading...
Loading firmware. Please wait... Done.
Selected UFS interface.
Socket detected!

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : PWM Gear 4

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS Please use USB3.0 for better speed.
Connected. Reading information.
Support for security LU: RPMB
Manufacturer name: SAMSUNG
Product name: KM2V8001CM-B707
Serial Number: GHCJ189P62
OEM ID: SAMSUNG_OEM_ID
Product Revision Level: 0003
Specification version: 2.10

Page size : 4096 B
Block size : 4096 B
Block count : 31246336
Size : 119.20 GB (122056.00 MB)
Max Number of LU : 8
AttrRefClkFreeq : 19.2 MHz
MaxDataInSize : 4096 bytes
MaxDataOutSize : 4096 bytes
Connect successful.
---------------------------------------------------------------

Physical partition number: 0

Block count : 31099904 (0x1DA8C00)
Size : 118.64 GB (121484.00 MB)
P00: GPT (00000000, 00000109) 1060 KB
P01: modemst1 (00000109, 00000300) 3072 KB
P02: modemst2 (00000409, 00000300) 3072 KB
P03: fsc (00000709, 00000020) 128 KB
P04: ssd (00000729, 00000002) 8 KB
P05: persist (0000072B, 00002000) 32 MB
P06: efs (0000272B, 00001400) 20 MB
P07: param (00003B2B, 00000A00) 10 MB
P08: debug (0000452B, 00000A00) 10 MB
P09: sec_efs (00004F2B, 00001400) 20 MB
P10: misc (0000632B, 00000100) 1024 KB
P11: keystore (0000642B, 00000080) 512 KB
P12: frp (000064AB, 00000080) 512 KB
P13: rawdump (0000652B, 00001000) 16 MB
P14: bota (0000752B, 00002864) 40.39 MB
P15: persistent (00009D8F, 00000080) 512 KB
P16: steady (00009E0F, 00000400) 4 MB
P17: dsp (0000A20F, 00004000) 64 MB
P18: modem (0000E20F, 0000A3E1) 163.9 MB
P19: boot (000185F0, 00006000) 96 MB
P20: recovery (0001E5F0, 00004E00) 78 MB
P21: vendor_boot (000233F0, 00006000) 96 MB
P22: dtbo (000293F0, 00001800) 24 MB
P23: apnhlos (0002ABF0, 0000BE00) 190 MB
P24: vbmeta_system (000369F0, 00000010) 64 KB
P25: metadata (00036A00, 00001000) 16 MB
P26: super (00037A00, 0027A600) 9.912 GB
P27: prism (002B2000, 00032000) 800 MB
P28: optics (002E4000, 00001400) 20 MB
P29: cache (002E5400, 00025800) 600 MB
P30: omr (0030AC00, 00003200) 50 MB
P31: spu (0030DE00, 00003200) 50 MB
P32: testparti (00311000, 00000400) 4 MB
P33: keyrefuge (00311400, 00003400) 52 MB
P34: userdata (00314800, 01A943FB) 106.3 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_modemst1_0x109_0x300_07_09_2024_16_32_35.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_modemst2_0x409_0x300_07_09_2024_16_32_35.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_efs_0x272b_0x1400_07_09_2024_16_32_35.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:04
SW: 2.2.5.3; FW: 1.00.

Physical partition number: 1

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 00000480) 4.5 MB
P02: xbl_config (00000486, 00000375) 3540 KB

Physical partition number: 2

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 00000480) 4.5 MB
P02: xbl_config (00000486, 00000375) 3540 KB

Physical partition number: 3

Block count : 1024 (0x400)
Size : 4.00 MB
P00: GPT (00000000, 00000020) 128 KB
P01: cdt (00000020, 00000020) 128 KB
P02: ddr (00000040, 00000100) 1024 KB
P03: pad (00000140, 000002BB) 2796 KB

Physical partition number: 4

Block count : 131072 (0x20000)
Size : 512.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: aop (00000006, 00000080) 512 KB
P02: tz (00000086, 00000400) 4 MB
P03: hyp (00000486, 00000800) 8 MB
P04: abl (00000C86, 00000400) 4 MB
P05: keymaster (00001086, 00000080) 512 KB
P06: cmnlib (00001106, 00000080) 512 KB
P07: cmnlib64 (00001186, 00000080) 512 KB
P08: uhuh (00001206, 00000400) 4 MB
P09: devcfg (00001606, 00000200) 2048 KB
P10: qupfw (00001806, 00000014) 80 KB
P11: limits (0000181A, 00000001) 4 KB
P12: limits-cdsp (0000181B, 00000001) 4 KB
P13: cpucp (0000181C, 00000100) 1024 KB
P14: btd (0000191C, 00000200) 2048 KB
P15: toolsfv (00001B1C, 00000200) 2048 KB
P16: logfs (00001D1C, 00000800) 8 MB
P17: logdump (0000251C, 00004000) 64 MB
P18: storsec (0000651C, 00000020) 128 KB
P19: vbmeta (0000653C, 00000010) 64 KB
P20: uefisecapp (0000654C, 00000200) 2048 KB
P21: imagefv (0000674C, 00000A00) 10 MB
P22: shrm (0000714C, 00000020) 128 KB
P23: devinfo (0000716C, 00000001) 4 KB
P24: apdp (0000716D, 00000040) 256 KB
P25: splash (000071AD, 000020A4) 32.64 MB
P26: uefivarstore (00009251, 00000080) 512 KB
P27: secdata (000092D1, 00000008) 32 KB
P28: bksecapp (000092D9, 00000200) 2048 KB
P29: vk (000094D9, 00000200) 2048 KB
P30: em (000096D9, 00000200) 2048 KB
P31: tziccc (000098D9, 00000200) 2048 KB
P32: hdm (00009AD9, 00000200) 2048 KB
P33: tz_kg (00009CD9, 00000200) 2048 KB
P34: pad (00009ED9, 00016122) 353.1 MB

Physical partition number: 5

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: fsg (00000006, 00000300) 3072 KB
P02: pad (00000306, 000004F5) 4.957 MB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_fsg_0x6_0x300_07_09_2024_16_32_41.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : cc800000 bytes
Device sector size : 512 bytes
Partition offset : 227840
Number of sectors : 2598400
Build ID : UP1A.231005.007
Display Build ID : UP1A.231005.007.A528BXXS7FXC8
Release ID : 14
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : a52sxqxx-user 14 UP1A.231005.007 A528BXXS7FXC8 release-keys

---------------------------------------------------------------
RPMB: Counter of the successful data write requests = 5623.
LUN 0 info:
Found WP Area at Lun 0 with WPT - NV-type: WPF bit is persistent through power cycle and hardware reset.WPFlag value may only be changed writing to Secure Write ProtectConfiguration Block. and WPF - Secure Write Protection is enabled. start: 0x37A00 and size: 0x27A600(Lun: 0; WPT: 0; WPF: 1; start: 0x37A00; size: 0x27A600)
Found WP Area at Lun 0 with WPT - NV-type: WPF bit is persistent through power cycle and hardware reset.WPFlag value may only be changed writing to Secure Write ProtectConfiguration Block. and WPF - Secure Write Protection is enabled. start: 0x2B2000 and size: 0x32000(Lun: 0; WPT: 0; WPF: 1; start: 0x2B2000; size: 0x32000)
Found WP Area at Lun 0 with WPT - NV-type: WPF bit is persistent through power cycle and hardware reset.WPFlag value may only be changed writing to Secure Write ProtectConfiguration Block. and WPF - Secure Write Protection is enabled. start: 0x2E4000 and size: 0x1400(Lun: 0; WPT: 0; WPF: 1; start: 0x2E4000; size: 0x1400)

Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x64ab_0x80_07_09_2024_16_32_51.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.5.3; FW: 1.00.
Partition table has been found on device.
Erasing. Please wait...
Erasing partition frp... Finalizing erase... Done.
Done.
Erasing partition persistent... Finalizing erase... Done.
Done.
Erasing is finished.
SW: 2.2.5.3; FW: 1.00.
Erasing. Please wait...
Erasing partition frp... Finalizing erase... Done.
Done.
Erasing partition persistent... Finalizing erase... Done.
Done.
Erasing is finished.
SW: 2.2.5.3; FW: 1.00.
Partition table has been found on device.
Erasing. Please wait...
Erasing partition frp... Finalizing erase... Done.
Done.
Erasing partition persistent... Finalizing erase... Done.
Done.
Erasing is finished.
SW: 2.2.5.3; FW: 1.00.
Disconnected.
 

Saaquib124

Junior Member
Jan 4, 2023
4
0
Mumbai
SAMSUNG A528B U7 FRP RESET DONE BUT FRP LOCK NOT REMOVE FROM PHONE
I ALSO ERASED PERSISTENT PARTITION BUT IT ALSO NOT WORK

Started.
Loading firmware. Please wait... Done.
Selected UFS interface.
Socket detected!

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : HS Gear 1

Connecting to server. Please wait...
Connection to server successful
Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS failure ...

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : PWM Gear 4

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS failure ...

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : PWM Gear 4

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS failure ...
Reloading...
Loading firmware. Please wait... Done.
Selected UFS interface.
Socket detected!

Selected PIN - CONNECTOR.

Model Settings:
Interface : UFS
Gear : PWM Gear 4

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)
Connecting UFS Please use USB3.0 for better speed.
Connected. Reading information.
Support for security LU: RPMB
Manufacturer name: SAMSUNG
Product name: KM2V8001CM-B707
Serial Number: GHCJ189P62
OEM ID: SAMSUNG_OEM_ID
Product Revision Level: 0003
Specification version: 2.10

Page size : 4096 B
Block size : 4096 B
Block count : 31246336
Size : 119.20 GB (122056.00 MB)
Max Number of LU : 8
AttrRefClkFreeq : 19.2 MHz
MaxDataInSize : 4096 bytes
MaxDataOutSize : 4096 bytes
Connect successful.
---------------------------------------------------------------

Physical partition number: 0

Block count : 31099904 (0x1DA8C00)
Size : 118.64 GB (121484.00 MB)
P00: GPT (00000000, 00000109) 1060 KB
P01: modemst1 (00000109, 00000300) 3072 KB
P02: modemst2 (00000409, 00000300) 3072 KB
P03: fsc (00000709, 00000020) 128 KB
P04: ssd (00000729, 00000002) 8 KB
P05: persist (0000072B, 00002000) 32 MB
P06: efs (0000272B, 00001400) 20 MB
P07: param (00003B2B, 00000A00) 10 MB
P08: debug (0000452B, 00000A00) 10 MB
P09: sec_efs (00004F2B, 00001400) 20 MB
P10: misc (0000632B, 00000100) 1024 KB
P11: keystore (0000642B, 00000080) 512 KB
P12: frp (000064AB, 00000080) 512 KB
P13: rawdump (0000652B, 00001000) 16 MB
P14: bota (0000752B, 00002864) 40.39 MB
P15: persistent (00009D8F, 00000080) 512 KB
P16: steady (00009E0F, 00000400) 4 MB
P17: dsp (0000A20F, 00004000) 64 MB
P18: modem (0000E20F, 0000A3E1) 163.9 MB
P19: boot (000185F0, 00006000) 96 MB
P20: recovery (0001E5F0, 00004E00) 78 MB
P21: vendor_boot (000233F0, 00006000) 96 MB
P22: dtbo (000293F0, 00001800) 24 MB
P23: apnhlos (0002ABF0, 0000BE00) 190 MB
P24: vbmeta_system (000369F0, 00000010) 64 KB
P25: metadata (00036A00, 00001000) 16 MB
P26: super (00037A00, 0027A600) 9.912 GB
P27: prism (002B2000, 00032000) 800 MB
P28: optics (002E4000, 00001400) 20 MB
P29: cache (002E5400, 00025800) 600 MB
P30: omr (0030AC00, 00003200) 50 MB
P31: spu (0030DE00, 00003200) 50 MB
P32: testparti (00311000, 00000400) 4 MB
P33: keyrefuge (00311400, 00003400) 52 MB
P34: userdata (00314800, 01A943FB) 106.3 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_modemst1_0x109_0x300_07_09_2024_16_32_35.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_modemst2_0x409_0x300_07_09_2024_16_32_35.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_efs_0x272b_0x1400_07_09_2024_16_32_35.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:04
SW: 2.2.5.3; FW: 1.00.

Physical partition number: 1

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 00000480) 4.5 MB
P02: xbl_config (00000486, 00000375) 3540 KB

Physical partition number: 2

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: xbl (00000006, 00000480) 4.5 MB
P02: xbl_config (00000486, 00000375) 3540 KB

Physical partition number: 3

Block count : 1024 (0x400)
Size : 4.00 MB
P00: GPT (00000000, 00000020) 128 KB
P01: cdt (00000020, 00000020) 128 KB
P02: ddr (00000040, 00000100) 1024 KB
P03: pad (00000140, 000002BB) 2796 KB

Physical partition number: 4

Block count : 131072 (0x20000)
Size : 512.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: aop (00000006, 00000080) 512 KB
P02: tz (00000086, 00000400) 4 MB
P03: hyp (00000486, 00000800) 8 MB
P04: abl (00000C86, 00000400) 4 MB
P05: keymaster (00001086, 00000080) 512 KB
P06: cmnlib (00001106, 00000080) 512 KB
P07: cmnlib64 (00001186, 00000080) 512 KB
P08: uhuh (00001206, 00000400) 4 MB
P09: devcfg (00001606, 00000200) 2048 KB
P10: qupfw (00001806, 00000014) 80 KB
P11: limits (0000181A, 00000001) 4 KB
P12: limits-cdsp (0000181B, 00000001) 4 KB
P13: cpucp (0000181C, 00000100) 1024 KB
P14: btd (0000191C, 00000200) 2048 KB
P15: toolsfv (00001B1C, 00000200) 2048 KB
P16: logfs (00001D1C, 00000800) 8 MB
P17: logdump (0000251C, 00004000) 64 MB
P18: storsec (0000651C, 00000020) 128 KB
P19: vbmeta (0000653C, 00000010) 64 KB
P20: uefisecapp (0000654C, 00000200) 2048 KB
P21: imagefv (0000674C, 00000A00) 10 MB
P22: shrm (0000714C, 00000020) 128 KB
P23: devinfo (0000716C, 00000001) 4 KB
P24: apdp (0000716D, 00000040) 256 KB
P25: splash (000071AD, 000020A4) 32.64 MB
P26: uefivarstore (00009251, 00000080) 512 KB
P27: secdata (000092D1, 00000008) 32 KB
P28: bksecapp (000092D9, 00000200) 2048 KB
P29: vk (000094D9, 00000200) 2048 KB
P30: em (000096D9, 00000200) 2048 KB
P31: tziccc (000098D9, 00000200) 2048 KB
P32: hdm (00009AD9, 00000200) 2048 KB
P33: tz_kg (00009CD9, 00000200) 2048 KB
P34: pad (00009ED9, 00016122) 353.1 MB

Physical partition number: 5

Block count : 2048 (0x800)
Size : 8.00 MB
P00: GPT (00000000, 00000006) 24 KB
P01: fsg (00000006, 00000300) 3072 KB
P02: pad (00000306, 000004F5) 4.957 MB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG_KM2V8001CM-B707_fsg_0x6_0x300_07_09_2024_16_32_41.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.

---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size : cc800000 bytes
Device sector size : 512 bytes
Partition offset : 227840
Number of sectors : 2598400
Build ID : UP1A.231005.007
Display Build ID : UP1A.231005.007.A528BXXS7FXC8
Release ID : 14
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : a52sxqxx-user 14 UP1A.231005.007 A528BXXS7FXC8 release-keys

---------------------------------------------------------------
RPMB: Counter of the successful data write requests = 5623.
LUN 0 info:
Found WP Area at Lun 0 with WPT - NV-type: WPF bit is persistent through power cycle and hardware reset.WPFlag value may only be changed writing to Secure Write ProtectConfiguration Block. and WPF - Secure Write Protection is enabled. start: 0x37A00 and size: 0x27A600(Lun: 0; WPT: 0; WPF: 1; start: 0x37A00; size: 0x27A600)
Found WP Area at Lun 0 with WPT - NV-type: WPF bit is persistent through power cycle and hardware reset.WPFlag value may only be changed writing to Secure Write ProtectConfiguration Block. and WPF - Secure Write Protection is enabled. start: 0x2B2000 and size: 0x32000(Lun: 0; WPT: 0; WPF: 1; start: 0x2B2000; size: 0x32000)
Found WP Area at Lun 0 with WPT - NV-type: WPF bit is persistent through power cycle and hardware reset.WPFlag value may only be changed writing to Secure Write ProtectConfiguration Block. and WPF - Secure Write Protection is enabled. start: 0x2E4000 and size: 0x1400(Lun: 0; WPT: 0; WPF: 1; start: 0x2E4000; size: 0x1400)

Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x64ab_0x80_07_09_2024_16_32_51.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.3; FW: 1.00.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.5.3; FW: 1.00.
Partition table has been found on device.
Erasing. Please wait...
Erasing partition frp... Finalizing erase... Done.
Done.
Erasing partition persistent... Finalizing erase... Done.
Done.
Erasing is finished.
SW: 2.2.5.3; FW: 1.00.
Erasing. Please wait...
Erasing partition frp... Finalizing erase... Done.
Done.
Erasing partition persistent... Finalizing erase... Done.
Done.
Erasing is finished.
SW: 2.2.5.3; FW: 1.00.
Partition table has been found on device.
Erasing. Please wait...
Erasing partition frp... Finalizing erase... Done.
Done.
Erasing partition persistent... Finalizing erase... Done.
Done.
Erasing is finished.
SW: 2.2.5.3; FW: 1.00.
Disconnected.

PLZ HELP ME TO UNLOCK FRP FOR SAMSUNG DEVICES
 
Top