Legitunlocks.com
Martview MS-2D 2D Screwdriver

Mi Max unfortunately Error Solved by EMMC Repair By UFIbox-EMMC TOOL[SUCCESS REPORT]

Thanos_92

Thanos_92

Friend's Martview
Oct 25, 2018
131
136
Mi Max unfortunately Error Solved by EMMC Repair By UFIbox-EMMC TOOL.
Flashed With Latest Firmware still same finally Remove EMMC,format EMMC,Reball Emmc and flash again by UFI android Tool.
job done 100 %

Identify EMMC

Code: 
Connection status: VUSB3HUB:VUSB3HUB:USB 2.0 High-SpeedInterface: UFI High-Speed
Serial number: 0011-8840-3781
Boot version: 1.04, FW version: 1.12 (Jun  7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJNB4R (0x424a4e423452), rev: 0x07, serial number: 0x6755B4E8
Manufacturing date: May 2016
CID: 15010042 4A4E4234 52076755 B4E85354
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\BJNB4R_6755B4E8.ext_csd"
ANDROID System Info:
platform: msm8952, cpu abi: arm64-v8a
manufacturer: Xiaomi
board: msm8952, name: hydrogen
brand: Xiaomi, model: MI MAX
build id: NRD90M, version: 7.0 Nougat (NRD90M)
build description: hydrogen-user 7.0 NRD90M V9.6.2.0.NBCMIFD release-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KLMBG2JENB-B041/32GB   (BGA153)

Security/IMEI backups.

Code: 
Connection status: VUSB3HUB:VUSB3HUB:USB 2.0 High-SpeedInterface: UFI High-Speed
Serial number: 0011-8840-3781
Boot version: 1.04, FW version: 1.12 (Jun  7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJNB4R (0x424a4e423452), rev: 0x07, serial number: 0x6755B4E8
Manufacturing date: May 2016
CID: 15010042 4A4E4234 52076755 B4E85354
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Reading syscfg at 0x00180000-0x001FFFFF size: 512 KiB...  Done in 0.160 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\syscfg.img" (CRC32: 0x75660AAC)
Blank checking: NOT blank
Reading keystore at 0x00300000-0x003FFFFF size: 1 MiB...  Done in 0.321 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\keystore.img" (CRC32: 0xA738EA1C)
Blank checking: blank
Reading devcfg at 0x00480000-0x004BFFFF size: 256 KiB...  Done in 0.080 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\devcfg.img" (CRC32: 0x86DF4D7F)
Blank checking: NOT blank
Reading keymaster at 0x01200000-0x012FFFFF size: 1 MiB...  Done in 0.320 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\keymaster.img" (CRC32: 0xDA25144C)
Blank checking: NOT blank
Reading keymasterbak at 0x01300000-0x013FFFFF size: 1 MiB...  Done in 0.322 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\keymasterbak.img" (CRC32: 0xDA25144C)
Blank checking: NOT blank
Reading fsg at 0x02000000-0x023FFFFF size: 4 MiB...  Done in 1.288 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\fsg.img" (CRC32: 0xDD1288B6)
Blank checking: NOT blank
Reading modemst1 at 0x02400000-0x027FFFFF size: 4 MiB...  Done in 1.296 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\modemst1.img" (CRC32: 0x4D78CAFC)
Blank checking: NOT blank
Reading modemst2 at 0x02800000-0x02BFFFFF size: 4 MiB...  Done in 1.296 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\modemst2.img" (CRC32: 0xD4015B5C)
Blank checking: NOT blank
Reading persist at 0x10000000-0x11FFFFFF size: 32 MiB...  Done in 10.432 s
File saved to "\\%BACKUPS%\Xiaomi\MI_MAX(NRD90M-7.0-NRD90M)[KLMBG2JENB-B041_6755B4E8]\user_part\persist.img" (CRC32: 0x4B7BDEDA)
Blank checking: NOT blank

Factory Reset.

Code: 
Connection status: VUSB3HUB:VUSB3HUB:USB 2.0 High-SpeedInterface: UFI High-Speed
Serial number: 0011-8840-3781
Boot version: 1.04, FW version: 1.12 (Jun  7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJNB4R (0x424a4e423452), rev: 0x07, serial number: 0x6755B4E8
Manufacturing date: May 2016
CID: 15010042 4A4E4234 52076755 B4E85354
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Factory erase... Done.
Reseting PART_CONFIG... Done.
Reseting BOOT_BUS_CONDITIONS... Done.
moviNAND Factory Reset... Done.

After Facroty Reset EMMC Info

Code: 
Connection status: VUSB3HUB:VUSB3HUB:USB 2.0 High-SpeedInterface: UFI High-Speed
Serial number: 0011-8840-3781
Boot version: 1.04, FW version: 1.12 (Jun  7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJNB4R (0x424a4e423452), rev: 0x07, serial number: 0x6755B4E8
Manufacturing date: May 2016
CID: 15010042 4A4E4234 52076755 B4E85354
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KLMBG2JENB-B041/32GB   (BGA153)

Flash by UFI-Anroid Tool
Code: 
Scanning for Qualcomm HS-USB QDLoader 9008 device...Download Port: Qualcomm HS-USB QDLoader 9008 (COM116)
Connection status: VUSB3HUB:VUSB3HUB:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.1.2, date: 3-19-2014
Initializing...
MSM Serial number: 0x03460a23
MSM HW ID: 0x009b00e1 (MSM8976)
OEM Public Key Hash: 0x57158eaf1814d78fd2b3105ece4db18a817a08ac664a5782a925f3ff8403d39a
SBL SW version: 0
Firehose: prog_emmc_firehose_8976_ddr.mbn
  sha1: 329310102f9f7b8d1b6f88df38d927218460659b, size: 348.82 KiB
  QC_IMAGE_VERSION: BOOT.BF.3.3.C3-00004
  IMAGE_VARIANT: EAADANAZA
  OEM_IMAGE_VERSION: c3-bsp-builder-job002.bj
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
  TargetName: 8976
  MemoryName: eMMC
  Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJNB4R (0x424a4e423452), rev: 0x07, serial number: 0x6755B4E8
Capacity: 29.13 GiB(31,281,119,232 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Processing rawprogram0.xml
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done.
Writing devcfg at 0x00480000 (66 sectors)... Done.
Writing devcfgbak at 0x004C0000 (66 sectors)... Done.
Writing sbl1 at 0x00600000 (719 sectors)... Done.
Writing sbl1bak at 0x00800000 (719 sectors)... Done.
Writing rpm at 0x00A00000 (326 sectors)... Done.
Writing rpmbak at 0x00B00000 (326 sectors)... Done.
Writing cmnlib at 0x00E00000 (394 sectors)... Done.
Writing cmnlibbak at 0x00F00000 (394 sectors)... Done.
Writing cmnlib64 at 0x01000000 (500 sectors)... Done.
Writing cmnlib64bak at 0x01100000 (500 sectors)... Done.
Writing keymaster at 0x01200000 (442 sectors)... Done.
Writing keymasterbak at 0x01300000 (442 sectors)... Done.
Writing tz at 0x01400000 (2695 sectors)... Done.
Writing tzbak at 0x01800000 (2695 sectors)... Done.
Writing aboot at 0x01C00000 (1122 sectors)... Done.
Writing abootbak at 0x01E00000 (1122 sectors)... Done.
Writing misc at 0x02C00000 (16 sectors)... Done.
Writing logo at 0x03800000 (3009 sectors)... Done.
Writing modem at 0x04000000 (212992 sectors)... Done.
Writing splash at 0x0C000000 (304 sectors)... Done.
Writing mdtp at 0x0E000000 (7373 sectors)... Done.
Writing dsp at 0x12000000 (32768 sectors)... Done.
Writing boot at 0x18000000 (26115 sectors)... Done.
Writing recovery at 0x1C000000 (29743 sectors)... Done.
Writing cache at 0x20000000 (12497 sectors)... Done.
Writing cust at 0x30000000 (584062 sectors)... Done.
Writing system at 0x50000000 (4459313 sectors)... Done.
Writing userdata at 0x110000000 (283590 sectors)... Done.
Writing BackupGPT at NUM_DISK_SECTORS-33. (33 sectors)... Done.
Applying DISK patch... Done.
Reset power ... Done.
Flashing completed in 2 mins 54.001 s


Result


Regards
Rehan.
 
  • Like
Reactions: Franky38, sumon mondol and anamunlockphone
You must log in or register to reply here.
Top