- Aug 16, 2019
- 9
- 19
Mobicel Astro version 8.1.0 firmware read and flash done by CM2 SP2 ver2.01 without any dead risk
here logs
Operation : Identify [ v2.01 ]
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e
SecInfo :
IMEI[1] : 357128094619929
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : B4C0F59DD55C
BT_MAC : AC989EF5C0B4
UserData : STATE : PLAIN
Done!
Elapsed: 00:01:42
Operation : Read FW [ v2.01 ]
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e
VlnrLevel : 0x02
SP7731E__Mobicel__ASTRO__8.1.0__OPM2.171019.012__k101
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : deltanv_w.bin
Read : pm_sys.bin
Read : modem_w.bin
Read : gdsp_w.bin
Read : nvitem_w.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : persist.img
Read : miscdata.bin
Read : boot.img
Read : recovery.img
Read : system.img
ExtSparse : Compression ratio : 81%
Read : vendor.img
ExtSparse : Compression ratio : 47%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 20%
Read : u-boot-spl.bin
Waiting for device ...
ADB : Device found!
Failed to read device! Break additional operation!
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:35:02
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e
Operation : Flash Firmware [ v2.01 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Skip update! Reason : untested chain!
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : deltanv_w.bin
CODE : pm_sys.bin
CODE : modem_w.bin
CODE : gdsp_w.bin
ERASE : FLASH_W
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : persist.img
ERASE : MISC
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : vendor.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
ERASE : UBOOT_LOG
UBOOT : u-boot-spl.bin
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:04:38
All done by me \
br gsm.mohsan
press thanks button
here logs
Operation : Identify [ v2.01 ]
- Power off device, wait 10-15 seconds
- Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
- Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e
SecInfo :
IMEI[1] : 357128094619929
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : B4C0F59DD55C
BT_MAC : AC989EF5C0B4
UserData : STATE : PLAIN
Done!
Elapsed: 00:01:42
Operation : Read FW [ v2.01 ]
- Power off device, wait 10-15 seconds
- Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
- Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e
VlnrLevel : 0x02
SP7731E__Mobicel__ASTRO__8.1.0__OPM2.171019.012__k101
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : deltanv_w.bin
Read : pm_sys.bin
Read : modem_w.bin
Read : gdsp_w.bin
Read : nvitem_w.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : persist.img
Read : miscdata.bin
Read : boot.img
Read : recovery.img
Read : system.img
ExtSparse : Compression ratio : 81%
Read : vendor.img
ExtSparse : Compression ratio : 47%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 20%
Read : u-boot-spl.bin
Waiting for device ...
ADB : Device found!
Failed to read device! Break additional operation!
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:35:02
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e
Operation : Flash Firmware [ v2.01 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
- Power off device, wait 10-15 seconds
- Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
- Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Skip update! Reason : untested chain!
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : deltanv_w.bin
CODE : pm_sys.bin
CODE : modem_w.bin
CODE : gdsp_w.bin
ERASE : FLASH_W
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : persist.img
ERASE : MISC
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : vendor.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
ERASE : UBOOT_LOG
UBOOT : u-boot-spl.bin
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:04:38
All done by me \
br gsm.mohsan
press thanks button