Solved Mobicel Astro Firmware Read and Flash Done With CM2 SP2 ver2.01

[gsm.mohsan]

Mobicel Astro version 8.1.0 firmware read and flash done by CM2 SP2 ver2.01 without any dead risk
here logs
Operation : Identify [ v2.01 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e


SecInfo :
IMEI[1] : 357128094619929
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : B4C0F59DD55C
BT_MAC : AC989EF5C0B4

UserData : STATE : PLAIN


Done!
Elapsed: 00:01:42

Operation : Read FW [ v2.01 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e

VlnrLevel : 0x02

SP7731E__Mobicel__ASTRO__8.1.0__OPM2.171019.012__k101

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : deltanv_w.bin
Read : pm_sys.bin
Read : modem_w.bin
Read : gdsp_w.bin
Read : nvitem_w.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : persist.img
Read : miscdata.bin
Read : boot.img
Read : recovery.img
Read : system.img
ExtSparse : Compression ratio : 81%
Read : vendor.img
ExtSparse : Compression ratio : 47%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 20%
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!
Failed to read device! Break additional operation!

Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:35:02

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 1537434602
Product Info : k101
Product Model : ASTRO
Product Brand : Mobicel
Product Name : ASTRO
Product Device : ASTRO
Product Manfct : Mobicel
Product Board : k101
Board Platform : sp7731e


Operation : Flash Firmware [ v2.01 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Mobicel : ASTRO
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Skip update! Reason : untested chain!

UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : deltanv_w.bin
CODE : pm_sys.bin
CODE : modem_w.bin
CODE : gdsp_w.bin
ERASE : FLASH_W
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : persist.img
ERASE : MISC
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : vendor.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
ERASE : UBOOT_LOG
UBOOT : u-boot-spl.bin

Flashing finished!

Reconnect Power/Cable!


Done!
Elapsed: 00:04:38
All done by me \
br gsm.mohsan
press thanks button

 

[Infinity-Box]

Please if possible upload flash file to the server with iosFileUploader tool according to this instruction

iosFileUploader is a software for automatic flash files upload to the server.
You can download iosFileUploader here

How to use:

Please login to view image

After upload files will be tested and then files will be available for download from the support area.

Where to find files:

• login to Support Area
• go to /flashfiles/-community-uploads/ folder

Please upload only good working files without passwords.

Thank you!

 

[gsm.mohsan]

I will today upload sir

 

[gsm.mohsan]

i already upload the file please check it out

 

[Massimbe]

Cadê o arquivo?