UMT MOTO G34 FRP ERROR

[bashir786]

READ INFO OK FRP ERROR


Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Opening Port...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1901A00 [SM6375] 0000E802
OPK_DATA : 9099E9CE525BFB93F1BA3C8E9E82528EE0812577F077BD122A8EB026F281A163
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6375_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6375, UFS, 128 GB
LU Count : 6 [0x00001000] [0x00000800] [0x00000800] [0x0004B000] [0x01D32800] [0x0004B000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...
boot.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
boot.os_ver : 11
boot.sec_patch : 2024-09-01
dtbo.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
HAB_META : fogos_50
prd.fprint : motorola/fogos_g/fogos:14/U1UGS34M.23-82-2-4/a1d86b
prd.os_ver : 14
prd.sec_patch : 2024-09-01
sys.fprint : motorola/fogos_g/fogos:14/U1UGS34M.23-82-2-4/a1d86b
sys.os_ver : 14
sys.sec_patch : 2024-09-01
sys_ext.fprint : motorola/fogos_g/fogos:14/U1UGS34M.23-82-2-4/a1d86b
sys_ext.os_ver : 14
sys_ext.sec_patch : 2024-09-01
vendor.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
vendor.os_ver : 11
vendor.sec_patch : 2024-09-01
vendor_boot.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
USERDATA : Encrypted
Operation Finished.




Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1901A00 [SM6375] 0000E802
OPK_DATA : 9099E9CE525BFB93F1BA3C8E9E82528EE0812577F077BD122A8EB026F281A163
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6375_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6375, UFS, 128 GB
LU Count : 6 [0x00001000] [0x00000800] [0x00000800] [0x0004B000] [0x01D32800] [0x0004B000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...
boot.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
boot.os_ver : 11
boot.sec_patch : 2024-09-01
dtbo.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
HAB_META : fogos_50
prd.fprint : motorola/fogos_g/fogos:14/U1UGS34M.23-82-2-4/a1d86b
prd.os_ver : 14
prd.sec_patch : 2024-09-01
sys.fprint : motorola/fogos_g/fogos:14/U1UGS34M.23-82-2-4/a1d86b
sys.os_ver : 14
sys.sec_patch : 2024-09-01
sys_ext.fprint : motorola/fogos_g/fogos:14/U1UGS34M.23-82-2-4/a1d86b
sys_ext.os_ver : 14
sys_ext.sec_patch : 2024-09-01
vendor.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
vendor.os_ver : 11
vendor.sec_patch : 2024-09-01
vendor_boot.fprint : motorola/fogos_g/fogos:11/U1UGS34.23-82-2-4/a118f2
Resetting FRP Lock...(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)Header Error!Failed
Using Patch Method... Done
Operation Finished.
QcFire Ver. 12.1

 

[promiae12]

Me too am facing a ome problem on moto g34 frp error

 

[kajalmandal]

Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM109)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1901A00 [SM6375] 0000E802
OPK_DATA : 9099E9CE525BFB93F1BA3C8E9E82528EE0812577F077BD122A8EB026F281A163
Initializing Protocol...OK
Using Pre-Defined Loader [MotoG34.ufl]
Preparing Loader...Done
Sending Loader [MotoG34]...Done
Executing Loader...OK
Hardware : SM6375, KM5L9001DM-B424 (UFS), 128 GB
LU Count : 6 [0x00001000] [0x00000800] [0x00000800] [0x0004B000] [0x01D32800] [0x0004B000]
Payload Info : [IN: 262144] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [79]
Parsing Partition Entries...Done
Erasing by Patch [frp]...OK
Operation Finished.
QcFire Ver. 13.3


frp not done