Legitunlocks.com
Martview RB-03 - Universal BGA Reballing Platform

Free Moto Tab G70 FRP Removal Guide

.::Greed::.

.::Greed::.

Friend's Martview
Jun 10, 2019
1,562
1,164
Moto Tab G70 FRP Removal Guide ​

Required Files & Tools

Download Contents
  • Moto Tab G70 FRP File
  • MTK Flash Tool v5.2104_P522
  • Auth Bypass Tool
  • Android Utility Tool ( For verification and ADB access )
  • Download Link: Click Here
Step-by-Step FRP Removal Instructions

1. Prepare Your PC
  • Install MediaTek USB Drivers if not already installed.
  • Disable Windows Driver Signature Enforcement (if needed).
2. Extract the Tool Package
  • You should see the following files:
    • Moto Tab G70 FRP scatter file
    • MTK Flash Tool (v5.2104_P522)
    • Auth Bypass Tool
3. Bypass the MediaTek Auth Protection
  • Run the auth bypass tool.
  • Connect the powered-off Moto Tab G70 via USB.
  • The tool will establish a handshake and bypass authentication, allowing Smart Flash Tool to communicate with the device.
4. Load FRP File in Smart Flash Tool
  • Open Smart Flash Tool.
  • In the "Download" tab, load the scatter file from the Moto Tab G70 FRP folder.
  • Only the FRP partition should be selected.
  • Click Download.
5. Flash the FRP Partition
  • With the device still connected, wait for the flashing process to complete.
  • You should see a green checkmark indicating success.
6. Post-Flash Steps
  • Disconnect the device.
  • Power it on.
  • The device should now boot without asking for the previously synced Google account.
Final Notes
  • Use the Android Utility Tool to confirm FRP status or to activate ADB if needed.
  • If the process fails, repeat the auth bypass step and ensure the correct drivers are installed.
If you find my post helpful, press like button✌​
 
You must log in or register to reply here.
Top