Moxee MH-T6000 OS11 Qualcomm DUMP Firmware Tested Read BY UMT QCFire GSM BISMA
GSM BISMA WEBSITE LINK
IF MY POST HELPFUL , THEN CLICK ON LIKE BUTTON
Operation : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1601000 [8937] 04001900
OPK_DATA : A7E18521C90DEBF7FCA804FEB98964384CC488EAAF7252A8BD9722438E73A37D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_066]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [55]
USERDATA : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Device : KonnectONE MH-T6000 [MH-T6000]
Brand : moxee
Prod.Name : MH-T6000
Software : MH-T6000V1.0.0B013, 231109 [Thu Nov 16 15:56:26 CST 2023]
Android Ver. : 11
Patch Level : 2023-12-05
Reading [modem]...Done
Reading [DDR]...Done
Reading [fsg]...Done
Reading [sec]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [dtbo]...Done
Reading [dtbobak]...Done
Reading [vbmeta]...Done
Reading [vbmetabak]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [devinfo]...Done
Reading [super]...Done
Reading [limits]...Done
Reading [cmnlib]...Done
Reading [cmnlibbak]...Done
Reading [cmnlib64]...Done
Reading [cmnlib64bak]...Done
Reading [keymaster]...Done
Reading [keymasterbak]...Done
Reading [vbmeta_system]...Done
Reading [vbmeta_systembak]...Done
Reading [fsc]...Done
Reading [ssd]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [devcfg]...Done
Reading [devcfgbak]...Done
Reading [dsp]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [splash]...Done
Reading [cache]...Done
Reading [metadata]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [keystore]...Done
Reading [config]...Done
Reading [oem]...Done
Reading [mota]...Done
Reading [dip]...Done
Reading [mdtp]...Done
Reading [syscfg]...Done
Reading [mcfg]...Done
Reading [apdp]...Done
Reading [msadp]...Done
Reading [dpo]...Done
Reading [carrier]...Done
Reading [factory]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Reading [gpt_main1]...Done
Reading [gpt_back1]...DoneSevere Error!
Reading [gpt_main2]...Done
Reading [gpt_back2]...DoneSevere Error!
Saved to : C:\UMTool\QcFire\Read\KonnectONE_MH-T6000_MH-T6000V1.0.0B013_2023-12-05\
Operation Finished.
QcFire Ver. 11.9
GSM BISMA WEBSITE LINK
IF MY POST HELPFUL , THEN CLICK ON LIKE BUTTONOperation : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1601000 [8937] 04001900
OPK_DATA : A7E18521C90DEBF7FCA804FEB98964384CC488EAAF7252A8BD9722438E73A37D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_066]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [55]
USERDATA : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Device : KonnectONE MH-T6000 [MH-T6000]
Brand : moxee
Prod.Name : MH-T6000
Software : MH-T6000V1.0.0B013, 231109 [Thu Nov 16 15:56:26 CST 2023]
Android Ver. : 11
Patch Level : 2023-12-05
Reading [modem]...Done
Reading [DDR]...Done
Reading [fsg]...Done
Reading [sec]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [dtbo]...Done
Reading [dtbobak]...Done
Reading [vbmeta]...Done
Reading [vbmetabak]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [devinfo]...Done
Reading [super]...Done
Reading [limits]...Done
Reading [cmnlib]...Done
Reading [cmnlibbak]...Done
Reading [cmnlib64]...Done
Reading [cmnlib64bak]...Done
Reading [keymaster]...Done
Reading [keymasterbak]...Done
Reading [vbmeta_system]...Done
Reading [vbmeta_systembak]...Done
Reading [fsc]...Done
Reading [ssd]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [devcfg]...Done
Reading [devcfgbak]...Done
Reading [dsp]...Done
Reading [modemst1]...Done
Reading [modemst2]...Done
Reading [splash]...Done
Reading [cache]...Done
Reading [metadata]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [keystore]...Done
Reading [config]...Done
Reading [oem]...Done
Reading [mota]...Done
Reading [dip]...Done
Reading [mdtp]...Done
Reading [syscfg]...Done
Reading [mcfg]...Done
Reading [apdp]...Done
Reading [msadp]...Done
Reading [dpo]...Done
Reading [carrier]...Done
Reading [factory]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Reading [gpt_main1]...Done
Reading [gpt_back1]...DoneSevere Error!
Reading [gpt_main2]...Done
Reading [gpt_back2]...DoneSevere Error!
Saved to : C:\UMTool\QcFire\Read\KonnectONE_MH-T6000_MH-T6000V1.0.0B013_2023-12-05\
Operation Finished.
QcFire Ver. 11.9