Code:
Connect phone on selected interface...
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
File [Ok] : rm902_14.0.5.mcusw.fpsx
File [Ok] : rm902_14.0.5_059R6B9_m4.rofs.fpsx
File [Ok] : rm902_14.0.5_059R6B9_m4.image.fpsx
Dead Mode is Selected
Waiting for USB device...
If PC not detect phone - Insert Cable first, then Insert battery
If stuck on boot - remove MicroSD card from phone!
--- Press phone's power button or insert cable & charger! ---
1st Boot Done, processing booting now
ASIC ID_F : 00000C2016100040498A22099280B8F4F6B69200
ASIC ID_E : 00000C2016100040
PUBLIC ID : DE5D0D28AFA357A9498A22099280B8F4F6B69200
XGCHIP ID : DE5D0D28AFA357A9
ROOT KEY HASH : 125FC72605B5C4E48A9E0225084D2579
ROM ID : 535882252F54C676
Prepare and send 2nd loader...
2nd boot Ok
Prepare and send Algo loader...
Algo boot Ok
IMEI [1] : 358984053983584
IMEI [2] : 358984053983592
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\InfinityBox\BEST\Backup\Cert\358984053983584_XG223_CRT.rpl
PAPUBkeys : 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E
=== SW Version Check ===
- > UPGRADE
=== SW Version Check ===
=== Flashing MCU ===
Processing file : rm902_14.0.5.mcusw.fpsx
Erasing...
Writing...
Total blocks : 82
Writing RKH CRT [ISSW]
Writing RKH CRT [MEMSET]
Writing RKH CRT [PRIMAPP]
Writing RKH CRT [LOADER]
Writing RKH CRT [PASUBTOC]
Writing RKH CRT [PAPUBKEYS] [PAKeys : 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E]
Writing RKH CRT [UPDAPP]
Writing RKH CRT [MCUSW]
File processed Ok, 81 blocks were writen
=== Flashing PPM ===
Processing file : rm902_14.0.5_059R6B9_m4.rofs.fpsx
Erasing...
Writing...
Total blocks : 14
Writing RKH CRT [PPM]
File processed Ok, 14 blocks were writen
=== Flashing CNT ===
Processing file : rm902_14.0.5_059R6B9_m4.image.fpsx
Erasing...
Writing...
Total blocks : 54
File processed Ok, 54 blocks were writen
Flashing done , total time : 00:00:55
Reboot phone to service mode...
Reading Phone Info....
Connected phone - 501
Software Info: V 14.0.5 21-04-14 RM-902 (c) Nokia
IMEI: 35898405398****
PPM version : c25cf632ba5a3015a449f312d0df3ed41a11b43d
Product code: 059T274
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Resetting LifeTimer
Reset Done!
Check and Upload User Certificates ...
Total - 59 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:01