hi team .i m new in ufi. i received a a3s showing recovery coruppted . then i took isp on phone.
i extract ofp file then flash handset in ufi emmc toolbox . its showing all info .but handset showing me 9008 port not getting power on.
here is info . plz tell me anything wrong.
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x06, serial number: 0x0824068E
Manufacturing date: Oct 2018
CID: 15010051 4536334D 42060824 068EA5CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: PBBM00
brand: OPPO, model: PBBM00 (R11s)
build model list: CPH1829 (CPH1829)
build id: OPM1.171019.026, version: 8.1.0 Oreo (PBBM00EX_11_A.23)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190624.211613 release-keys
Internal storage: 7.50 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)
i extract ofp file then flash handset in ufi emmc toolbox . its showing all info .but handset showing me 9008 port not getting power on.
here is info . plz tell me anything wrong.
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x06, serial number: 0x0824068E
Manufacturing date: Oct 2018
CID: 15010051 4536334D 42060824 068EA5CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: PBBM00
brand: OPPO, model: PBBM00 (R11s)
build model list: CPH1829 (CPH1829)
build id: OPM1.171019.026, version: 8.1.0 Oreo (PBBM00EX_11_A.23)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190624.211613 release-keys
Internal storage: 7.50 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)