Help oppo a3s

zachaus

Active Member
Jul 4, 2019
41
9
OPPO A3s CPH1803 Dead after factory reset with ufi box isp pinout. only showing Qualcomm HS-USB QDLoader 9008.
How can I revive back?. Need solution.
 

Abdullah

Friend's Martview
Oct 22, 2016
1,422
4,051
Pakistan
PayPal:

Donate money to this user
OPPO A3s CPH1803 Dead after factory reset with UFi box isp pinout. only showing Qualcomm HS-USB QDLoader 9008.
How can I revive back?. Need a solution.
Just Remove you ISP Pinout Jumpers and Clean ISP Pinouts and Check all components are ok.
Make sure any components are not damaged during soldering

It will work 110% In sha Allah
 
  • Like
Reactions: goodboy

zachaus

Active Member
Jul 4, 2019
41
9
need solution for this error

Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47) Insertion
test... Done. Init bus... VCC: 2.8 V, VCCQ: 1.8 V Bus: 1 bit (SDR
48MHz) Access mode: sector mode Power supply: dual-voltage
(1.70-1.95V, 2.7-3.6V) Card/BGA: BGA (Discrete embedded) - High
density MMC Manufacturer ID: 0x90 (SK Hynix) Product name: HAG4a2
(0x484147346132), rev: 0xA5, serial number: 0xC0D6A9A4 Manufacturing
date: Dec 2018 CID: 90014A48 41473461 32A5C0D6 A9A4C52A CSD: D0270132
8F5903FF FFFFFFE7 8A400016 EXT_CSD revision: 1.8 (MMC v5.1) Partition
info: Boot1: 4096 KiB Boot2: 4096 KiB RPMB: 4096 KiB User area:
14.68 GiB(15,758,000,128 bytes)

Factory Reset... Creating filesystem... Done. Writing cache...
Wrote 60110774 blocks, expected to write 65536 blocks Done. Creating
filesystem... Done. Writing userdata... Unknown chunk type 0x0000 at
0x00C590C4 Wrote 50103937 blocks, expected to write 2423803 blocks
Done. Done.
 
Top