how to flash/repair this ufs chip by easy jtag
log
Z3X EasyJtag EMMC File Manager v 1.19 at 10/07/2020
Init UFS Engine: 0/OK
EasyJtag Plus S/N: 3AA38516A760CD46
EasyJtag Plus Box FirmWare: 2.53
Box Hardware = EasyJtag 2nd Generation
UFS: Socket Info:
S/N: 0x01239475012940A1EE
Desc: EasyJTAG UFS Socket BGA-254 by EasyJTAG 20.08.20
Type: EasyJtag UFS Socket BGA-254
ID: 2541
UFS: Voltage Info:
Mode: LOW
VCC : 3278 mV, VCCQ2: 1904 mV
3v3 : 3331 mV, 1v2: 1190 mV
UFS: Memory Info:
Connection: UNKNOWN SOCKET TYPE
Vendor: SAMSUNG
Name: KM5H7001DM-B424
S/N: 38b261dc510c
OEM ID: SAMSUNG_OEM_ID
Firm Version: 4.00
UFS Version: 2.1
Size: 0x000EE6800000/59.60 GB
Max LUNs: 8
LUNs Cnt: 6
W-LUNs Cnt: 1
LUNs ReConfig: Enabled
UFS Health Info:
UFS Life Time A: 0x01 -> 0% - 10% Life Time Used
UFS Life Time B: 0x01 -> 0% - 10% Life Time Used
UFS Pre-EOL Info: 0x01 -> Used Less 80% of Reserved Blocks
UFS: LUNs Info:
LUN 0 -> Size: 14493696 Block(s)/55.29 GB
LUN 1 (Boot A) -> Size: 2048 Block(s)/8.00 MB
LUN 2 (Boot B) -> Size: 2048 Block(s)/8.00 MB
LUN 3 -> Size: 8192 Block(s)/32.00 MB
LUN 4 -> Size: 1048576 Block(s)/4.00 GB
LUN 5 -> Size: 65536 Block(s)/256.00 MB
W-LUN 0xC4 (REPORT LUNS) -> Size: 65536 Block(s)/16.00 MB
UFS Init OK
Scanning Data From UFS Chip. Please wait..
Scanning GUID Partition Table from LUN 0
Error Reading Sector: 0, Count: 6, Err: -108/UNKN_ERR
Try Again #1
Error Reading Sector: 0, Count: 6, Err: -504/UNKN_ERR
Try Again #2
Error Reading Sector: 0, Count: 6, Err: -504/UNKN_ERR
Try Again #3
Too Many Errors. Stopped. Err: -504/UNKN_ERR
Error While Reading. Exit. Code: -504
Error While Scan Partitions. Scanner Shutdown..
Scanner Thread Terminated
Elapsed: 00:02:07:155
Found 0 Partition(s)..
Search Partitions Fail..
Check Socket/UFS Chip and Try Again..
