OPPO F9 CPH1823EX DUMP WRITE FAILED

venny

Active Member
Sep 14, 2017
69
45
india
OPPO F9 DEAD TRYING TO WRITE DUMP BOOT 1 FAILED EMMC FACTORY RESET OKAY NAND TEST OKAY EARSE OKAY
DOING WITH ISP ADAPTER V2
CSD WRITE OKAY

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4574
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 3H6CAB (0x334836434142), rev: 0x02, serial number: 0x9132C408
Manufacturing date: Sep 2018
CID: 15010033 48364341 42029132 C40895FA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Loading file: "\\%BACKUPS%\Oppo\CPH1823(CPH1823EX_11_A.14_190420-8.1.0-O11019)[3H6CAB_9132C408]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done
New EXT CSD info:
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Boot area write protection: 0x00


BOOT 1 FAILED WITH THIS ERROR
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4574
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 3H6CAB (0x334836434142), rev: 0x02, serial number: 0x9132C408
Manufacturing date: Sep 2018
CID: 15010033 48364341 42029132 C40895FA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\\%BACKUPS%\Oppo\CPH1823(CPH1823EX_11_A.14_190420-8.1.0-O11019)[3H6CAB_9132C408]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Failed to write block 0x00010000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
 

venny

Active Member
Sep 14, 2017
69
45
india
After giving ufi to external boot 1 and 2 write okay but userdata giving error morethan 1mb file
 
Top