Hello every one,
Please help me to fix this device oppo F9 (CPH1823) has bricked. i'm trying to reprogram this one in UFI I get this error massage. I'm attaching those logs i get error please help me experts............
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x21F730F1
Manufacturing date: Jul 2018
CID: 90014A48 43473861 34A221F7 30F175CC
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Writing preloader header... Done
Current partition access:
Access to boot partition 1
Writing preloader at 0x00000000 (557 sectors)... Done in 0.599 s
Writing boot partition config to 0x48... Done
Current partition access:
Access to user area
Processing file: "recovery.img"...
Writing recovery at 0x00108000 (74742 sectors)... Failed to write block 0x020E8000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
Please help me to fix this device oppo F9 (CPH1823) has bricked. i'm trying to reprogram this one in UFI I get this error massage. I'm attaching those logs i get error please help me experts............
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x21F730F1
Manufacturing date: Jul 2018
CID: 90014A48 43473861 34A221F7 30F175CC
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Writing preloader header... Done
Current partition access:
Access to boot partition 1
Writing preloader at 0x00000000 (557 sectors)... Done in 0.599 s
Writing boot partition config to 0x48... Done
Current partition access:
Access to user area
Processing file: "recovery.img"...
Writing recovery at 0x00108000 (74742 sectors)... Failed to write block 0x020E8000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)