P40 Lite (JNY-LX1) Harmony Os (Emui 12) Huawei id Remove || Done ||

[Ddevbhalla303]

P40 Lite (JNY-LX1) Harmony Os (Emui 12) Huawei id Remove || Done ||
no Lock,fingerprint Problem and no chip damage problem

Here Logs

Welcome to Octoplus Huawei Software v.‪1.3.0‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM6 HUAWEI USB COM 1.0

Job ID: 0000000001C1F534
2022-05-14 13:27:21
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1
Selected method: Reset Huawei Id (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V3...
Initializing remote service connection...
Checking resource information...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in porgress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7TSX208N026812
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...

Device Model: ‪JNY-LX1‬
System: ‪JNY-L01 12.0.0.220(C316E3R3P2)‬
Android Version: ‪10‬
Base Version: ‪JNY-LGRP2-OVS 102.0.0.220‬
Custom Version: ‪JNY-L01-CUST 102.0.0.3(C316)‬
Preload Version: ‪JNY-L01-PRELOAD 102.0.0.2(C316R3)‬
C_Version: ‪C316‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Checking resource information...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪JNY-LX1‬
System: ‪JNY-L01 12.0.0.220(C316E3R3P2)‬
MEID: ‪A00000BA36FAF6‬
IMEI A: ‪869113040992720‬
IMEI B: ‪000000000000000‬
Checking resource information...
Writing secure data...
Resetting Huawei ID...

Reset Huawei ID done.
Performed by ‪1.3.0‬ Software version.

 

[WeHere97]

Mine failed
it cant reboot to fastboot mode


Job ID: 0000000001C5F0C4
2022-05-17 23:15:56
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1‬
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V2...
Initializing remote service connection...
Checking resource information...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Error: Fastboot devices not found

Reset Huawei ID failed.
Performed by ‪1.3.0‬ Software version.

 

[Ddevbhalla303]

Mine failed
it cant reboot to fastboot mode


Job ID: 0000000001C5F0C4
2022-05-17 23:15:56
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1‬
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V2...
Initializing remote service connection...
Checking resource information...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Error: Fastboot devices not found

Reset Huawei ID failed.
Performed by ‪1.3.0‬ Software version.

do opretion with battery
and when seraching device for fastboot reconnect cable from pc side
then device detect in fastboot mode

 

[WeHere97]

do opretion with battery
and when seraching device for fastboot reconnect cable from pc side
then device detect in fastboot mode

I tried it didnt work

 

[ranakami5]

I am also having same problem its cant rebutting in fast boot mode

 

[apacheadmiral]

Before taking out the USB on the machine you have to put the battery back , then remove USB from the machine & put it back it will detect the phone

 

[salim560]

I also try that and still failed to reboot to fastboot mode , any help Kirin bootloader v3 jny-lx1

 

[mobile.mohandes]

It was ok for me


Job ID: 000000000195DAE3
2022-12-10 11:07:35
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX1‬
Selected method: Reset Huawei Id (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7VMG211R000652
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 12.0.0.246(C185E4R6P2)‬
Android Version: ‪10‬
Base Version: ‪JNY-LGRP2-OVS 102.0.0.246‬
Custom Version: ‪JNY-L21-CUST 102.0.0.4(C185)‬
Preload Version: ‪JNY-L21-PRELOAD 102.0.0.2(C185R6)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Warning: You may use an incompatible operation method for your device.
Warning: Recommended method - EMUI12/Harmony
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JNY-LX1‬
System: ‪JNY-L21 12.0.0.246(C185E4R6P2)‬
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by ‪1.3.3‬ Software version.

 

[SALIF1234]

GSM frp