Z3X Pandora Tool 6.3 / 6.4 new update

Z3X Team

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Nokia C32 AT-1534 Done.

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP And Wipe
Software version: 6.3
Work ID: 16624771


Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP And Wipe
Software version: 6.3
Work ID: 1644229

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&1D7E6C28&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: H360621799001032
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia C32
Product Name : Mockingbird_00WW
Product Device : MKDA
Board Platform : sp9863a
Build ID : TP1A.220624.014
Build Date : Fri Jul 7 03:54:59 UTC 2023
Display ID : 00WW_1_260
Security Patch : 2023-06-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 00WW_1_260
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
vivo v2208 vivo x80 lite frp reset done

Selected model: Vivo V2208 (Vivo X80 Lite)
Operation: Erase FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5FA85596, 0x0D491191, 0x9545D761, 0xDEC2CCEA
Load DownloadAgent... OK
Search DA... OK [10]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): KM8F9001JM-B813 (0700)
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [17]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM8F9001JM-B813
UFS_FWVER : 0700
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0200000000 (8.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2208
Product Name : V2202_EEA
Product Device : V2202
Product Board : k6877v1_64_k419
Board Platform : mt6877
Build ID : SP1A.210812.003
Build Date : Mon Mar 13 16:04:42 CST 2023
Display ID : TP1A.220624.014 release-keys
Security Patch : 2023-03-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : compiler03131607
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files/Z3X/Pandora/Backup/MTK/Vivo_V2208%20(Vivo%20X80%20Lite)/FRP_BACKUP_(2024-01-9_11-53-41)/
Writting FRP data... OK
Erase FRP done!
 

Uncle_stan

Member
Jan 8, 2021
11
4
Ghana

- Added support new Vivo security in Preloader mode for MT6781, MT6853, MT6891, MT6893
- Added Reset FRP in Download Mode (ODIN) for Samsung MTK phones
- Added support Samsung phones
SM-A136B, SM-A136M - Galaxy A13 5G,
SM-A137F - Galaxy A13,
SM-A145P, SM-A145R Galaxy A14,
SM-A146P, SM-A146U, SM-A146U1, SM-A146W - Galaxy A14 5G,
SM-A3460, SM-A346B, SM-A346E, SM-A346M, SM-A346N - Galaxy A34 5G,
SM-M136B - Galaxy M13 5G
- Fixed some bugs
Link:
168.85 MB file on MEGA
Selected model: Samsung SM-T227U (Samsung Galaxy Tab A7 Lite)
Operation: Unlock network (Server)
Software version: 6.3
Work ID: 16748308

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Continue? Yes
Searching Samsung modem... detected COM65
Reading phone info... OK
Model: SM-T227U
AP version: T227USQS5CWD1
CSC version: T227UOYN5CWD1
CP version: T227USQS5CWD1
OS version: 13
Product code: XAA
Carrier ID: XAU
Phone SN: R83W700G2FR
Unique number: H1547583009A9606045A
IMEI: 358891165254194
IMEI Certi: PASS
Changing csc to XAA... OK
Powering off... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM62 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM76 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM76 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x522C1788, 0x23720BE0, 0xE5DE5D87, 0x6C35D832
Get Chip ID... [MT6765]
Get SOC ID... [3421EA16CE437F1DF74FCB16C4D5B05F490766695D9360FB6C2B6517B9DE343A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100475836424142009A9606045A35
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GX6BAB
EMMC_ID : 0x150100475836424142009A9606045A35
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-T227U
Product Name : gta7litesq
Product Device : gta7lite
Product Board : gta7lite
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Sun Apr 2 16:36:48 KST 2023
Display ID : TP1A.220624.014.T227USQS5CWD1
Security Patch : 2023-04-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : T227USQS5CWD1
Userdata FS Type : F2FS
Read security partition from phone... OK
Searching server... OK
Waiting for server answer... OK
Unlocking ... [3] ... OK
Every time you turn on your phone, you must enter unlock code 0000000000000000 (16 zeros)
Network Unlock done.


AFTER SUCCESSUFFLY UNLOCKED 16 ZEROS SHOWED INCORRECT. PLEASE REFUND



Work ID: 16748308

Selected model: Samsung SM-T227U (Samsung Galaxy Tab A7 Lite)
Operation: Unlock network (Server)
Software version: 6.3
Work ID: 16748308
 
  • Like
Reactions: cxara and contasion

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno CH6n (Tecno Camon 18)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM0 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x40E1CFD6, 0xFA1773D1, 0x72AF17A4, 0x3C722707
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x90014A6844456150330310150A3CA807
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hDEaP3
EMMC_ID : 0x90014A6844456150330310150A3CA807
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CH6n
Product Name : CH6n-OP
Product Device : TECNO-CH6n
Product Board : TECNO-CH6n
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Wed Nov 29 22:20:38 CST 2023
Display ID : TECNO-S-64-231129V884
Security Patch : 2023-11-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 231129V1424
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_CH6n%20(Tecno%20Camon%2018)/FRP_BACKUP_(2024-1-10_11-5-13)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Samsung SM-A226B (Samsung Galaxy A22 5G)
Operation: Erase FRP
Software version: 6.3

Searching USB Flash interface... COM11 detected
Setup connection... OK
Model: SM-A226B
SW version: A226BXXU5BVH2
Sales code: XSG
Device ID: d253416572c8
Vendor: SAMSUNG
Product: DH6DAB
Unique Number: W154448300C401D2A368
FW Version: 2
Capacity: 64 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM11 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... OK
Rebooting... OK
Erase FRP done!
 

hermann07

Active Member
Jul 19, 2017
31
24
ABIDJAN
Skype
hermann0990
Sonork ID
100.1650096
PLEASE FIX THIS ERROR

Selected model: Xiaomi Redmi Note 12S (Sea)
Operation: Read Flash Info
Software version: 6.3

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM17 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x5ABC9F21, 0x9BCA7698, 0xA097B8D9, 0x7255712E
Get Chip ID... [MT6768]
Get SOC ID... [A5755872F49575F57183E93465B15BED73966CCBF475CBE1CAF0B180D17E429D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD62D004D4D43313238510DAB07B43ABD
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... error(STATUS_EMI_SETTING_VERSION_ERROR)
 
  • Like
Reactions: GsmToto

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno KI7 (Tecno Spark 10 Pro)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM7 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x8D8FD349, 0x9C55BD86, 0x875FE994, 0x4BA51F34
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0xD62D004D4D433235365110A043C05A43
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC256
EMMC_ID : 0xD62D004D4D433235365110A043C05A43
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A40A00000 (233,01Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KI7
Product Name : KI7-GL
Product Device : TECNO-KI7
Product Board : TECNO-KI7
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Thu Dec 21 00:33:57 CST 2023
Display ID : TECNO-T-64-ARMV82-231220V2503
Security Patch : 2023-12-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 231220V2999
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to D:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KI7%20(Tecno%20Spark%2010%20Pro)/FRP_BACKUP_(2024-1-14_10-34-11)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno KG5j (Tecno Spark Go 2022)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM13 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xF403FB59, 0x31D0DFB7, 0x767152B4, 0x21CD6C22
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x1501004355544134320546FEFEA468AD
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x1501004355544134320546FEFEA468AD
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5j
Product Name : KG5j-OP
Product Device : TECNO-KG5j
Product Board : TECNO-KG5j
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Fri Aug 25 14:47:33 CST 2023
Display ID : TECNO-RGo-32-230825V304
Security Patch : 2023-09-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230825V463
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to D:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5j%20(Tecno%20Spark%20Go%202022)/FRP_BACKUP_(2024-1-14_20-57-11)/
Writting FRP data... OK
Erase FRP done
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno LE7 (Tecno Pova 2)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM14 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x34B04285, 0xC3462202, 0x0533A60C, 0x346D391C
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x90014A68444561503303102E991EA887
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hDEaP3
EMMC_ID : 0x90014A68444561503303102E991EA887
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO LE7
Product Name : LE7-GL
Product Device : TECNO-LE7
Product Board : TECNO-LE7
Board Platform : mt6768
Build ID : RP1A.200720.011
Build Date : Mon Nov 14 03:32:57 CST 2022
Display ID : TECNO-R-64-221111V150
Security Patch : 2022-11-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 221113V558
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to D:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LE7%20(Tecno%20Pova%202)/FRP_BACKUP_(2024-1-14_20-21-45)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Vivo PD1803 (Vivo Y83)
Operation: Repair
Software version: 6.3

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM7[PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF10CA944, 0x3AEE90EC, 0x1256993C, 0x1270C79F
Get Chip ID... [MT6765]
Get SOC ID... [CC61C79358A407C5E13AA6E5C2AC4FDD51E1AA344698792E30 9AB4656CC13973]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010052483634414205A4D09B8555CF
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RH64AB
EMMC_ID : 0x15010052483634414205A4D09B8555CF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo Y83
Product Name : PD1803BF_EX
Product Device : PD1803BF_EX
Product Board : k62v1_64_bsp
Board Platform : MTK6765
Build ID : O11019
Build Date : Sat Nov 16 11:57:55 CST 2019
Display ID : O11019 release-keys
Security Patch : 2019-11-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1573876683
Userdata FS Type : EXT4
Reading security from phone... OK
IMEI 1: 356xxxxxxxxxxxxxxxx
IMEI 2: 356xxxxxxxxxxxxxxxx
Set new IMEI to:
IMEI 1: 356xxxxxxxxxxxxxxxxxx
IMEI 2: 356xxxxxxxxxxxxxxxx
Searching security key... found! [1]
Writing security to phone... OK
Repair Security done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM8 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM8 [BROM]
Open port... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCC82B736, 0x6CE6909A, 0x532CEA62, 0xA29444AA
Get Chip ID... [MT6739]
Get SOC ID... [A6B0CE4CDE5974DE7AD5338CD18C0B7962F8A9A0856BB14AF5 13FDD1F491FB3E]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100513331534D42065C73F2E1434F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Q31SMB
EMMC_ID : 0x150100513331534D42065C73F2E1434F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : NUU
Product Manufacturer : NUU
Product Model : N5502L
Product Name : A10L_TC
Product Device : N5502LA
Product Board : NUU
Board Platform : mt6739
Build ID : QP1A.190711.020
Build Date : Fri Jul 9 14:52:55 CST 2021
Display ID : QP1A.190711.020 dev-keys
Security Patch : 2021-06-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 1625813083
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Vivo PD2139F (Vivo Y21 (2021))
Operation: Erase FRP And Wipe
Software version: 6.3
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 1933455

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM8 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD44BB2D1, 0xACAD6618, 0xAC0191F2, 0x0DB126C9
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100445036444242027CD8FA21B827
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DBB
EMMC_ID : 0x150100445036444242027CD8FA21B827
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2111
Product Name : 2111N
Product Device : 2111
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : SP1A.210812.003
Build Date : Wed Dec 6 10:24:21 CST 2023
Display ID : SP1A.210812.003 release-keys
Security Patch : 2023-12-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler12061031
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD2139F%20(Vivo%20Y21%20(2021))/FRP_BACKUP_(2024-1-16_19-34-12)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Wipe data done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Vivo V1907 (Vivo S1)
Operation: Erase FRP And Wipe
Software version: 6.3
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 173577844

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM9[PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x993EFF35, 0xAC1F9842, 0x3C19874A, 0x37995157
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100445636444D4202DF619092A64D
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DMB
EMMC_ID : 0x150100445636444D4202DF619092A64D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1907
Product Name : 1907N
Product Device : 1907N
Product Board : k68v1_64
Board Platform : MTK6768
Build ID : SP1A.210812.003
Build Date : Sun Apr 24 16:46:31 CST 2022
Display ID : SP1A.210812.003 release-keys
Security Patch : 2022-04-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler04241648
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_V1907%20(Vivo%20S1)/FRP_BACKUP_(2024-1-21_14-34-45)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Wipe data done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno CG6j (Tecno Camon 17)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x7F3913B5, 0x0DA935E3, 0x399E289B, 0x109367D8
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x15010033563643414202CC8DD070283F
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 3V6CAB
EMMC_ID : 0x15010033563643414202CC8DD070283F
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1EC00000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CG6j
Product Name : CG6j-OP
Product Device : TECNO-CG6j
Product Board : TECNO-CG6j
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Thu Apr 14 17:05:48 CST 2022
Display ID : TECNO-S-64-220414V692
Security Patch : 2022-03-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 220414V813
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_CG6j%20(Tecno%20Camon%2017)/FRP_BACKUP_(2024-1-21_14-33-45)/
Writting FRP data... OK
Erase FRP done!
 

Aslam444

Junior Member
Mar 30, 2017
2
0
South afroca
Hi. My pandora box is not opening. Eny idea why. When i open it just show my card serial number.
 

Attachments

  • Screenshot_20240121_192316_Video Player.jpg
    Screenshot_20240121_192316_Video Player.jpg
    46.4 KB · Views: 3

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno KG5j (Tecno Spark Go 2022)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM12 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xA75B82E6, 0xEC26FCAF, 0xC6BA21F9, 0x038201B7
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x150100435554413432057E858F0C68A9
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x150100435554413432057E858F0C68A9
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5j
Product Name : KG5j-OP
Product Device : TECNO-KG5j
Product Board : TECNO-KG5j
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Wed May 10 10:34:27 CST 2023
Display ID : TECNO-RGo-32-230510V398
Security Patch : 2023-05-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230510V455
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5j%20(Tecno%20Spark%20Go%202022)/FRP_BACKUP_(2024-1-22_11-23-27)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Xiaomi Redmi Note 12S (Sea)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 1066
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7A3F4CF0, 0x2E2CACDE, 0xD44B4B44, 0xDED711D2
Get Chip ID... [MT6781]
Get SOC ID... [EAD4B8B90344E4E25EB22DAF5431FD0A2584B0CF2733BC48EB 6B26C94A7F272E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [11]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM8F9001JM-B813 (0700)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM8F9001JM-B813
UFS_FWVER : 0700
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3B96000000 (238,34Gb)
RAM INFO:
INT_SRAM: 0x0000060000 (384,00Kb)
EXT_RAM : 0x0200000000 (8,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... error(0)
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20Note%2012S%20(Sea)/FRP_BACKUP_(2024-1-23_9-23-54)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Spreadtrum Spreadtrum
Operation: Unlock network
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM8
Port: USB\VID_1782&PID_4D00\5&1EFC55B6&4&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T310
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: SN117090
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : DIALN
Product Manufacturer : DIALN
Product Model : G65
Product Name : G65
Product Device : G65
Board Platform : ums312
Build ID : TP1A.220624.014
Build Date : Thu Dec 7 18:50:21 CST 2023
Display ID : G65-1-v1.0-SIMLOCK-flash-20231207
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 1701671552
Userdata FS Type : F2FS
Check security state... OK [1]
Unlock bootloader... OK
Patch modem check...
Patch data... OK
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
elected model: Tecno KI5K (Tecno Spark 10C)
Operation: Erase FRP And Wipe
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM33
Port: USB\VID_1782&PID_4D00\6&18B88C3&2&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 098783738U10221
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KI5k
Product Name : KI5k-GL
Product Device : TECNO-KI5k
Product Board : TECNO-KI5k
Board Platform : ums9230
Build ID : SP1A.210812.016
Build Date : Thu Dec 14 12:22:39 CST 2023
Display ID : KI5k-F065ABCDEAgAh-S-GL-20231214V554
Security Patch : 2023-12-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : GL-20231214V554
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
 

GsmToto

Super Moderator
Jan 1, 2021
3,358
17,507
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno CG6j (Tecno Camon 17)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM9 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x8F93F772, 0x749F1F3F, 0xA36421B8, 0x4E354F73
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x90014A68444561503303000F3FF96867
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hDEaP3
EMMC_ID : 0x90014A68444561503303000F3FF96867
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CG6j
Product Name : CG6j-OP
Product Device : TECNO-CG6j
Product Board : TECNO-CG6j
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Thu Apr 20 21:03:19 CST 2023
Display ID : TECNO-S-64-230420V876
Security Patch : 2023-04-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 230420V1000
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_CG6j%20(Tecno%20Camon%2017)/FRP_BACKUP_(2024-1-24_18-22-44)/
Writting FRP data... OK
Erase FRP done!
 
Top