Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DA4064 (0x444134303634), rev: 0x01, serial number: 0x5EAC023E
Manufacturing date: Sep 2018
CID: 45010044 41343036 34015EAC 023E9558
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x40
Boot acknowledge is sent during the boot operation
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x05
Bus width: x4 (sdr/ddr), boot mode: sdr(default), retain bus width and boot mode
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
eMMC 5.x HEALTH report:
Device lifetime: Reserved
Estimation of the device lifetime (SLC): Exceeded its maximum estimated device life time
Estimation of the device lifetime (MLC): 10% - 20% device life time used
mi not 6 pro emmc i need reper this
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DA4064 (0x444134303634), rev: 0x01, serial number: 0x5EAC023E
Manufacturing date: Sep 2018
CID: 45010044 41343036 34015EAC 023E9558
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x40
Boot acknowledge is sent during the boot operation
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x05
Bus width: x4 (sdr/ddr), boot mode: sdr(default), retain bus width and boot mode
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
eMMC 5.x HEALTH report:
Device lifetime: Reserved
Estimation of the device lifetime (SLC): Exceeded its maximum estimated device life time
Estimation of the device lifetime (MLC): 10% - 20% device life time used
mi not 6 pro emmc i need reper this
