please help oppo a5s dead after factory reset via ufi .
- Thread starter sokhom
- Start date
EXT CSD info:
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
here is info
Connection status: XHCI:HUB3:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1790
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x1D829010
Manufacturing date: Jul 2019
CID: 15010047 4436424D 42011D82 901076C4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909 (OPPO A5s)
build model list: CPH1909 (OPPO A5s)
build id: O11019, version: 8.1.0 Oreo (CPH1909EX_11_A.27)
build description: full_oppo6765_18511-user 8.1.0 O11019 1566840396 release-keys
Internal storage: 22.40 GiB
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGD6000BM-BXXX/32G
here is log factory reset it stuck on write user data
Connection status: XHCI:HUB3:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1790
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x1D829010
Manufacturing date: Jul 2019
CID: 15010047 4436424D 42011D82 901076C4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 13/16384 inodes and 2091/65536 blocks
Writing cache... Done
Creating filesystem with parameters:
Size: 24051167232
Block size: 4096
Blocks per group: 32768
Inodes per group: 8160
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 5871867
Block groups: 180
Reserved block group size: 1024
Created filesystem with 11/1468800 inodes and 136228/5871867 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0A0C4
Wrote 5100724 blocks, expected to write 5871867 blocks
Done
Done
MTK Preloader file info.
Found 9 supported eMMC CID:
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[Samsung] RD64MB 15010052 4436344D 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] GP6BMB 15010047 5036424D 42xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[Samsung] QD63MB 15010051 4436334D 42xxxxxx xxxxxxxx
please help more
i have followed your. but still dead.
PS i didn't read back up while phone is live. how to solve.
log after write extcsd (backup after phone dead)
Connection status: XHCI:HUB3:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1790
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x1D829010
Manufacturing date: Jul 2019
CID: 15010047 4436424D 42011D82 901076C4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909 (OPPO A5s)
build model list: CPH1909 (OPPO A5s)
build id: O11019, version: 8.1.0 Oreo (CPH1909EX_11_A.27)
build description: full_oppo6765_18511-user 8.1.0 O11019 1566840396 release-keys
Internal storage: 22.40 GiB
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGD6000BM-BXXX/32G
partition configuration 0x00 write on ext csd if still dead after partition configuration sort clk registor