eMMC CID : 150100424A4E423452070559E8D573BF
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 07/2016 Rev.0x7
eMMC NAME: BJNB4R , S/N: 89778389
eMMC NAME (HEX): 424A4E423452
Possible eMMC NAME Mismatch
Possible IC Name[0]: Samsung , KLMAG2JENB-B041/16GB @FBGA169 , Firmware is Updatable
Possible IC Name[1]: Samsung , KLMBG2JENB-B041/32GB @FBGA169 , Firmware is Updatable
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
RPMB Info mmc_init Error, Reason: CARD is Password Locked
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: Yes
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: BJNB4R_ 89778389_20220224_1226.extcsd
Blocks Reading Error (0x0 , 1 , Reason: CMD Timeout Error )
Blocks Reading Error (0x200 , 1 , Reason: CMD Timeout Error )
Warning! Read error 0 strange behavior now likely!
Blocks Reading Error (0x747BFFE00 , 1 , Reason: CMD Timeout Error )
Warning! Read error 0 strange behavior now likely!
Partition info not found
Done.
Checking security ...
Running:eMMC: Factory Format Fix
Z3X EasyJtag Software ver. 3.7.0.24
Skip loading eMMC Addon Firmware
CMD Pullup Level:1835 mV
CMD Active Level:1885 mV
Box IO Level:1800 mV
CLK Rate:36000 kHz
Formatting eMMC card, please wait up to 3 min...
Final Stage...
eMMC Final Operation Failed.
Done.
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 07/2016 Rev.0x7
eMMC NAME: BJNB4R , S/N: 89778389
eMMC NAME (HEX): 424A4E423452
Possible eMMC NAME Mismatch
Possible IC Name[0]: Samsung , KLMAG2JENB-B041/16GB @FBGA169 , Firmware is Updatable
Possible IC Name[1]: Samsung , KLMBG2JENB-B041/32GB @FBGA169 , Firmware is Updatable
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
RPMB Info mmc_init Error, Reason: CARD is Password Locked
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: Yes
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: BJNB4R_ 89778389_20220224_1226.extcsd
Blocks Reading Error (0x0 , 1 , Reason: CMD Timeout Error )
Blocks Reading Error (0x200 , 1 , Reason: CMD Timeout Error )
Warning! Read error 0 strange behavior now likely!
Blocks Reading Error (0x747BFFE00 , 1 , Reason: CMD Timeout Error )
Warning! Read error 0 strange behavior now likely!
Partition info not found
Done.
Checking security ...
Running:eMMC: Factory Format Fix
Z3X EasyJtag Software ver. 3.7.0.24
Skip loading eMMC Addon Firmware
CMD Pullup Level:1835 mV
CMD Active Level:1885 mV
Box IO Level:1800 mV
CLK Rate:36000 kHz
Formatting eMMC card, please wait up to 3 min...
Final Stage...
eMMC Final Operation Failed.
Done.