post all your success stories with your avator box

[Muzammal Mudassar]

Samsung Clone J500H MT6572 Reset Pin Done With Great Avtaor Box

Reset Pin/Info Done...

Br
.::AMS2762::.

 

[Muzammal Mudassar]

Qmobile Qtab Q400 Stuck Logo Recover Only Formate Done With Feature Avator Box

Please login to view image

Formate/info Done..

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

intex aqua y2 pro read pattern done

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

Voice Mobile V470 Spd 6531 Illegal use Shutdown Solved Just Single Button Avatorbox

Please login to view image

Read File

Please login to view image

Format Is Enough

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

China Phone NUU MT6735 Stuck Logo Recover By Fomate.info With Avator Box

Please login to view image

Formate/Info Done..

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

Qmobile A51 Read Info & Format Done For Removing Many pattern By Initial Avator 8.002

Please login to view image

Read Info

Please login to view image

Format Very Safe

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

Qmobile Z6 MT6592 Hanging Problem Solve Only Formate Done By Great Avator Box

Please login to view image

Formate Done...

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

Qmobile A900 MT6580 Hang Logo Recover Done Only Formate With Avator Tool

Please login to view image

FORMATE DONE..

Please login to view image

Br
.::AMS2762::.

 

[Muzammal Mudassar]

Please login to view image

Br
.::AMS2762::.

 

[Martview]

Hi Avator Pro User

Now you can share your success stories With your Avator Box at this thread

With Best Wishes and Thanks for your support

Avator Box

 

[rajsingh]

Intex Aqya Lions 3 Hang On Logo Solved With avtar Pro Dongle

Operation : Write Flash
Boot: MTK_AUTO
Error Report: OFF
Hint:Power off phone, Insert usb cable
(Connecting 'BROM Mode' Hold Bootkeys)
scanning usb device...
Phone found: MediaTek PreLoader USB VCOM (Android) (COM20)
A thread is created to handle new usb connection, pls wait...
Any errors please select another boot and try again.
SoC: 6735 [MT6735M_S01], SW: 0000, HW: CA00
BL Ver: 01; Indicate: 00000000
Loading boot...
INT_SYSRAM_BOOT test completed.
Auto changing FlashType to eMMC mode
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 0000000000000000
eMMC cid: 450100444634303136
EMMC CID : 450100444634303136
EMMC Vendor: Sandisk_DF4016
EMMC Size : 16GiB
BOOT1 Size : 4 MiB
BOOT2 Size : 4 MiB
RPMB Size : 4 MiB
User Area : 14.68 GiB
Boot Completed.


Checking userdata encryption...
Userdata State : Encrypted


Checking scatter file ...
> Scatter File Ok
Checking config
> Config.. ok
Checking Firmware with Current SoC ...
> firmware... ok.
Firmware Type : Verified

Writing lk
> ok
Writing boot
> ok
Writing recovery
> ok
Writing logo
> ok
Writing secro
> ok
Writing tee1
> ok
Writing tee2
> ok
Writing system
> ok
Writing cache
> ok
Writing userdata
> ok
ReChecking info......ok
All done.

Operation Done: 00:03:07
Avator Pro SW 2.4

 

[rajsingh]

Redmi NOte 3 Flashing





RedMi Note 3 flashing done-AvatorPro Dongle



RedMi Note 3 flashing done-
Quote:

Operation : RAW Program Brand: Xiaomi Model: Redmi Note3 Tips http://forum.**************/ubb/tongue.gif ower off Phone, Remove & Reinsert Battery, hold vol+ & vol- keys, insert USB Cable scanning usb device... Phone found [ USB Port:COM43 ] A thread is created to handle new usb connection, pls wait... Reading cpu info...ok MSM ID: 0x009B00E1 Serial: 0x040273DD Error: unknow id, pls send the msm id and processor type to support Processor: unknow Sending the FH...ok boot is ok. para to target is ok Storage: eMMC Reading Partitions info...ok Chcking storage...ok eMMC Size: 32GiB Checking xml settings ... Writing NON-HLOS.bin > ok Writing sbl1.mbn > ok Writing sbl1.mbn > ok Writing rpm.mbn > ok Writing rpm.mbn > ok Writing tz.mbn > ok Writing tz.mbn > ok Writing hyp.mbn > ok Writing hyp.mbn > ok Writing adspso.bin > ok Writing splash.img > ok Writing emmc_appsboot.mbn > ok Writing emmc_appsboot.mbn > ok Writing boot.img > ok Writing recovery.img > ok Writing system.img > ok Writing cache.img > ok Writing misc.img > ok Writing mdtp.img > ok Writing cust.img > ok Writing userdata.img > ok Writing gpt_main0.bin > ok Writing gpt_backup0.bin > ok Checking patches file ...ok patching ...ok

 

[rajsingh]

Lyf ls 4505 Hang On Logo Solved With Format


Operation : Format / Reset
Boot: Qualcomm_AUTO
Tips

http://forum.**************/ubb/tongue.gif

ower off Phone, Remove & Reinsert Battery, hold vol+ & vol- keys, insert USB Cable
scanning usb device...
Phone found [ USB Port:COM5 ]
A thread is created to handle new usb connection, pls wait...
Reading cpu info...ok
MSM ID: 0x009600E1
Serial: 0x02642A4C
Processor: MSM8909, Snapdragon210
Sending the FH...ok
boot is ok.
para to target is ok
Storage: eMMC
Reading Partitions info...ok
Chcking storage...ok
eMMC Size: 8GiB
Erasing ...
All done.

Operation Done: 00:01:20
Avator Pro SW 2.0

 

[rajsingh]

Redmi 3s Prime Flash with Avtar box

Please login to view image

 

[rajsingh]

Iris X9 Flashing with avtar

Please login to view image

 

[rajsingh]

Huawai u 19 Flashing

Please login to view image

 

[rajsingh]

MMx A096 Flashing

Please login to view image

 

[rajsingh]

LEnovo A536 Flashing Logs

Operation : Write Flash
Boot: MTK_AUTO
Hint:Power off phone, Insert usb cable
(Connecting 'BROM Mode' Hold Bootkeys)
scanning usb device...
Phone found: PreLoader USB VCOM Port (COM3)
A thread is created to handle new usb connection, pls wait...
Any errors please select another boot and try again.
SoC: 6582[MT6582], SW: 0001, HW: CA01
BL Ver: 01; Indicate: 00000000
Loading boot...
INT_SYSRAM_BOOT test completed.
Auto changing FlashType to eMMC mode
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 0000000000000000
eMMC cid: 1501004B3758564D42
EMMC CID : 1501004B3758564D42
EMMC Vendor: Samsung_K7XVMB
EMMC Size : 8GiB
BOOT1 Size : 4 MiB
BOOT2 Size : 4 MiB
RPMB Size : 512 KiB
User Area : 7.28 GiB
Boot Completed.


Checking userdata encryption...
Userdata State : Generic


Checking scatter file ...
> Scatter File Ok
Checking config
> Config.. ok
Checking Firmware with Current SoC ...
> firmware... ok.
Firmware Type : Generic

Writing mbr
> ok
Writing ebr1
> ok
Writing uboot
> ok
Writing bootimg
> ok
Writing recovery
> ok
Writing sec_ro
> ok
Writing logo
> ok
Writing android
> ok
Writing cache
> ok
Writing usrdata
> ok
ReChecking info......ok
All done.

Operation Done: 00:05:46
Avator Pro SW 2.1

 

[rajsingh]

MMx Q 331 HAng on logo Solved

Operation : Format / Reset
Boot: SC7731-2 EMMC
Hint: Power off phone, hold bootkey, Insert usb cable
Scanning usb device...
Phone found : SPRD U2S Diag (COM6)
A thread is created to handle new usb connection, pls wait...
Bootstrap: SPRD3
Connected...sending boot...
waiting for ack...
Reconnect is ok
FDL1 test...OK
Sending FDL2...
FDL2 test...OK
Checking H/W report info...
Read info is done.
Erasing userdata partiton, it will take a minute or so, pls wait...
Erase has been completed.

Auto formatting...
Format Done.

Operation Done: 00:00:41
Avator Pro SW 2.1

 

[rajsingh]

Iball Snap 4g2 Flashing WIth Avtar Pro

Operation : Write Flash
Boot: MTK_AUTO
Hint:Power off phone, Insert usb cable
(Connecting 'BROM Mode' Hold Bootkeys)
scanning usb device...
Phone found: PreLoader USB VCOM Port (COM3)
A thread is created to handle new usb connection, pls wait...
Any errors please select another boot and try again.
SoC: 6735 [MT6735M_S01], SW: 0000, HW: CA00
BL Ver: 01; Indicate: 00000000
Loading boot...
INT_SYSRAM_BOOT test completed.
Auto changing FlashType to eMMC mode
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 0000000000000000
eMMC cid: 700100563130303136
EMMC CID : 700100563130303136
EMMC Vendor: Kingston_V10016
EMMC Size : 16GiB
BOOT1 Size : 4 MiB
BOOT2 Size : 4 MiB
RPMB Size : 4 MiB
User Area : 14.09 GiB
Boot Completed.


Checking userdata encryption...
Userdata State : Generic


Checking scatter file ...
> Scatter File Ok
Checking config
> Config.. ok
Checking Firmware with Current SoC ...
> firmware... ok.
Firmware Type : Generic

Writing preloader
> ok
ReChecking info......ok
creating GPT...
> ok
Writing lk
> ok
Writing boot
> ok
Writing recovery
> ok
Writing logo
> ok
Writing secro
> ok
Writing tee1
> ok
Writing tee2
> ok
Writing system
> ok
Writing cache
> ok
Writing userdata
> ok
ReChecking info......ok
creating GPT...
> ok
All done.

Operation Done: 00:11:06
Avator Pro SW 2.1