Post Here Any Problem Will You Face During Any Oprations

Deepesh Sharma

Staff member
Super Moderator
Apr 4, 2017
1,678
2,382
India
Sonork ID
100.1614172
Hi
Post Here What Problem You Face During Any Opration On Easy Jtag
We Try To Help As Possible
Note-Screen Shot Must Required,Post Full Detail,Mention Problem's
Thanks You
 
Reactions: maanarman and saaya

melltoo

Member
Mar 7, 2019
8
0
HI SIR PLEASE HELP ME

Firmware package: ND1-205A-0-00WW-A02_EDL_non_Fastboot_Eng
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM5)
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.0, date: 7-8-2015
Initializing...
MSM Serial number: 0xbd95c697
MSM HW ID: 0x0004f0e1 (MSM8937)
OEM Public Key Hash: 0xf5f4192a33b2830974b400119bab728cc9fe911011f928625c2aed0da441ac97
SBL SW version: 0
Firehose: prog_emmc_firehose_8937.mbn
sha1: a96c3624a7447d6e457d0b7b296d4026bc64ea87, size: 214.53 KiB
QC_IMAGE_VERSION: BOOT.BF.3.3-00211
IMAGE_VARIANT: FAADANAZA
OEM_IMAGE_VERSION: cm-build-c14
Sending firehose loader... Done.
Handshaking...
init storage:fail
init storage:fail
Check eMMC or PMIC.


HOW TO RE PROGRAM EMMC TA-1053
 

reliableshop

Friend's Martview
Sep 15, 2017
63
12
Nepal
Skype
sushil.lama2
Mistakely put wrong clk, cmd, data I done as a pin lock and frp after that Mobile hang on log by jtag z3x you can see below video what i m done.
any solution for this.
 

reliableshop

Friend's Martview
Sep 15, 2017
63
12
Nepal
Skype
sushil.lama2
Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
Build ID: OPM1.171019.026
Release Base ID: 8.1.0
Architecture ABI: arm64-v8a
Device manufacturer: OPPO
Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20180829.115028 release-keys
---------------------------------------------
Detected USERDATA USERDATA : 0x0158000000 (9.299GB)
Unable to mount USERDATA , code : 95
phone in hang on logo condition
 

reliableshop

Friend's Martview
Sep 15, 2017
63
12
Nepal
Skype
sushil.lama2
Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
Build ID: OPM1.171019.026
Release Base ID: 8.1.0
Architecture ABI: arm64-v8a
Device manufacturer: OPPO
Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20180829.115028 release-keys
---------------------------------------------
Detected USERDATA USERDATA : 0x0158000000 (9.299GB)
Unable to mount USERDATA , code : 95
phone in hang on logo condition
After write user data write phone live
5759
 

aichi

Junior Member
Dec 9, 2019
4
0
hello to merry Christmas to all
oppo f11 after format easy jtag dead please help here last info
i have lost chp19XX also please sameone help


Setting frequence to 21 MHz
CMD Pullup Level: 1732 mV
CMD Active Level: 1784 mV
EMMC Device Information :
EMMC CID: 90014A68433861503E0360F106772682
EMMC CSD: D02700328F5903FFFFFFFFEF8E400042
EMMC Manufacture : SKHYNIX , EMMC NAME: hC8aP> , HEX: 68433861503E , S/N: 60F10677 , rev. 0x03
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 2/2019
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 228 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC BootConfig Write Protection: Permanent Protection
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: hC8aP__60F10677_20191227_195233.extcsd
EMMC Init completed.
 

rogersmobiles

Active Member
Nov 2, 2019
26
4
Hello friends,
I bought easy jtag plus lite and im tototally new to emmc programming can someone please help me out. Here is my whatsapp number +255743098141

Sent From Infinix X623 Using Martview Forum App
 

rogersmobiles

Active Member
Nov 2, 2019
26
4
sir how to backup imei data qualcomm emmc before reprogramming by easyjatg or ufi
You can read partition on by vendor then right it later when phone is alive. For Samsung phones when you click scan for partition on read by vendor tab efs will be backed up automatically.

Sent From Infinix X623 Using Martview Forum App