MICROMAX Q340 HANG ON LOGO DONE BY AVENGERS BOX
INFO
FLASHING
INFO
FLASHING
Post Here Successful Reports With Avengers Avengers Box/Dongle
- Thread starter Fast Unlocking
- Start date
Vivo Y91c Remove Pattern Lock Password Lock Vivo 1820 PINLOCK WITHOUT LOOS DATA
VIVO 91C (1823) PINLOCK SINGLE CLICK WITH OUT LOSS DATA
[VIVO MODE]Action: Reset To Factory.
Selected Vivo:Y91C new
Exe version: Avengers Box MTK 0.7.0
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM121)
Resetting userdata.
[--0] writing to cache
[helio]Please power phone in recovery mode(VOL +) to complete action.
[0]All done.
VIVO 91C (1823) PINLOCK SINGLE CLICK WITH OUT LOSS DATA
[VIVO MODE]Action: Reset To Factory.
Selected Vivo:Y91C new
Exe version: Avengers Box MTK 0.7.0
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM121)
Resetting userdata.
[--0] writing to cache
[helio]Please power phone in recovery mode(VOL +) to complete action.
[0]All done.
LENOVO A2016A40 FRP RESET DONE BY AVENGERS BOX
READ INFO
FRP RESET
READ INFO
FRP RESET
Huawei U2805-1 Unlock done
USB Connection selected.
EXE VERSION: Avenger MTK Tool 0.3
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM43
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM43)
BaseBand CPU : MT6276
SW_VER : U2805-1V100R001C457B200SP03SC
HW_VER :
Meta mode conected ok, start reading phone....
Phone imei[1] : 135790246811220
Phone imei[2] : 135790246811220
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.
USB Connection selected.
EXE VERSION: Avenger MTK Tool 0.3
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM43
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM43)
BaseBand CPU : MT6276
SW_VER : U2805-1V100R001C457B200SP03SC
HW_VER :
Meta mode conected ok, start reading phone....
Phone imei[1] : 135790246811220
Phone imei[2] : 135790246811220
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.
HUAWEI CUN-U29 Pattern Lock Read Done
Action : Meta Read Pattern.
Selected Model: Huawei:Ascend Y5 II[CUN-U29]
Exe version: Avengers Box MTK 0.7.2
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
\\?\usb#vid_0e8d&pid_2000#7&a730265&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[92]META Port Detected: MediaTek USB VCOM (Android) (COM92)
USB\VID_0E8D&PID_2007\7&A730265&0&1
Start sync target, waiting responce.....
ChipID: MT6582,S01
[MT6582,S01]Using Algo 1
Brand: HUAWEI
Board: HUAWEI
Model: HUAWEI CUN-U29
Version: 5.1
Platform: MT6582
**
1 2 3
4 5 6
7 8 9
Pattern: 1478963
**
Pattern HEX: 618B589AA98DFEE743E7120913A0665A4A5E8317
**
[0]All done.
Action : Meta Read Pattern.
Selected Model: Huawei:Ascend Y5 II[CUN-U29]
Exe version: Avengers Box MTK 0.7.2
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
\\?\usb#vid_0e8d&pid_2000#7&a730265&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[92]META Port Detected: MediaTek USB VCOM (Android) (COM92)
USB\VID_0E8D&PID_2007\7&A730265&0&1
Start sync target, waiting responce.....
ChipID: MT6582,S01
[MT6582,S01]Using Algo 1
Brand: HUAWEI
Board: HUAWEI
Model: HUAWEI CUN-U29
Version: 5.1
Platform: MT6582
**
1 2 3
4 5 6
7 8 9
Pattern: 1478963
**
Pattern HEX: 618B589AA98DFEE743E7120913A0665A4A5E8317
**
[0]All done.
SAI MOBILE SOLUTION
Active Member
SELECTED: SC9832E
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM6)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
*****
Manufacturer: Mobiwire
Brand: Mobiwire
Device: K5P_4G_U
Model: Kicka 5 Plus 4G
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: sp9832e_1h10_go
Build description: Vodacom_K5P_4G_MZ_SS_T_L_V01.2_220627_MP 11 RP1A.201005.001 26139 release-keys
Board:
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RP1A.201005.001 release-keys
Security patch: 2022-05-05
CPU NAME: SC9832E
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Avengers Unisoc Module 2.2.8
Total Time: 00:00:44
Done.
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM6)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
*****
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: sp9832e_1h10_go
Build description: Vodacom_K5P_4G_MZ_SS_T_L_V01.2_220627_MP 11 RP1A.201005.001 26139 release-keys
Board:
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RP1A.201005.001 release-keys
Security patch: 2022-05-05
CPU NAME: SC9832E
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Avengers Unisoc Module 2.2.8
Total Time: 00:00:44
Done.