Post Here Successfully Unlocked/calculated/flashed/repaired Phones Via Nck Dongle

maanarman · Aug 28, 2018

Logs

Code:

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Aug 28, 2018

Logs

Code:

 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Aug 29, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35575a4d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E35575A4D42 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9480000       [3.645 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: JDQ39
 Display ID: ALPS.JB3.MP.V1
 Version: 4.2.2
 Build Date: Thu Aug 28 19:45:06 CST 2014
 Model: td710
 Brand: alps
 Device: td710
 Manufacturer: alps
 Region: FR
 Mediatek Version Release: ALPS.JB3.MP.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 356375060079262
 IMEI[2] from NVRAM: 356375060079270
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x3940000        - LEN: 0x200           
 Start processing custom.img
 Reading:  BEGIN: 0x39c0000        - LEN: 0x12c00000     
 Start processing system
 Reading:  BEGIN: 0x16fc0000       - LEN: 0x22600000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_alps_td710_4_2_2_ALPS_JB3_MP_V1(2018_08_29_19_43)
 Wait untill phone will start charging.
 All done.

maanarman · Aug 30, 2018

Motorola Xt1771 Hang on black Display Done With Nck Dongle

Code:

Action : Boot Info.
 Selected Motorola:XT1771
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NMA26.42-11-3
 Version: 7.1.1
 Build Date: Sat May  6 04:42:45 CDT 2017
 Model: Moto E (4) Plus
 Brand: motorola
 Device: nicklaus
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P42
 Wait untill phone will start charging.
 All done.

Code:

 Action : Format UserData.
 Selected Motorola:XT1771
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+24576Mb) SAMSUNG 0x524531424d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100524531424D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xde800000        length: 0x19000000     
 Partition: userdata  begin: 0xf7800000        length: 0x2a8a80000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

maanarman · Sep 1, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847326404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483847326404 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: KOT49H
 Display ID: A3300HV_A442_01_25_150620_ROW
 Version: 4.4.2
 Build Date: Sat Jun 20 11:59:55 CST 2015
 Model: LenovoA3300-HV
 Brand: Lenovo
 Device: A3300-HV
 Manufacturer: LENOVO
 Mediatek Version Release: A3300HV_A442_01_25_150620_ROW
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 866147029768332
 IMEI[2] from NVRAM: 866147029768332
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x5180000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x6500000        - LEN: 0x4c800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_Lenovo_LenovoA3300-HV_4_4_2_A3300HV_A442_01_25_150620_ROW(2018_08_29_16_56)
 Wait untill phone will start charging.
 All done.

maanarman · Sep 2, 2018

LOGS

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100385750443352 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: MRA58K
 Display ID: WF581U.BP244.LX.V2.0.20170103
 Version: 6.0
 Build Date: Tue Jan  3 13:19:10 CST 2017
 Model: i 3
 Brand: kimfly
 Device: i3
 Manufacturer: kimfly
 Mediatek Version Release: alps-mp-m0.mp1-V2.34_droi6580.we.m_P41
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 352886080640945
 IMEI[2] from NVRAM: 352886080640952
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0xc0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_kimfly_i 3_6_0_alps-mp-m0_mp1-V2_34_droi6580_we_m_P41(2018_08_25_15_50)
 Wait untill phone will start charging.
 All done.

maanarman · Sep 3, 2018

Logs

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: QMobile I6 metal
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM140)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SANDISK 0x445331303038
 EMMC FW VERSION: 30:30:36:30:33:33:00:00
 EMMC CID: 450100445331303038 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Sep 4, 2018

Info

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP6.V1
 Version: 4.4.2
 Build Date: 2014年 09月 28日 星期日 17:43:46 CST
 Model: QMobile X25
 Brand: QMobile
 Device: X25
 Region: US
 Mediatek Version Release: ALPS.KK1.MP6.V1
 IMEI[1]: 355794061250667
 IMEI[2]: 355794066250662
 Wait untill phone will start charging.
 All done.

Write FF

Code:

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Sep 5, 2018

Logs

Code:

 Flash files count is :13
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MTK USB Port (COM3)
 Boot mode: Brom
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 110100303034473930 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Sep 5, 2018

LENOVO A3300-HV WRITE FF DONE

Code:

 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847326404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483847326404 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Sep 5, 2018

OALE X2 WRITE FF DONE

Code:

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM13)
 Boot mode: Brom
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 44:00:00:00:00:00:00:00
 EMMC CID: 880103455042313030 : 00000000000000
 EMMC UA SIZE: 0x1ce100000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1ced00000      [7.231 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM17)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Sep 7, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 46:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0x1ce100000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1ced00000      [7.231 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HFB_V017En
 Version: 5.1
 Build Date: Mon Feb  5 10:46:39 CST 2018
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 356651090142720
 IMEI[2] from NVRAM: 356651090142738
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_09_05_17_14)
 Wait untill phone will start charging.
 All done.

maanarman · Sep 7, 2018

Oppo A1601 Factory Reset Done

Code:

 Action : Format UserData.
 Selected OPPO:A1601
 Exe version: Avengers Box MTK 0.4.9
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL+ button untill inserting USB cable.
 Detected : MTK USB Port (COM42)
 Boot mode: Brom
 Sending DA agent, please wait...
 Using Algo 3.
 ----------------------------------------------------
 BaseBand CPU :MT6750
 BaseBand CPU Secure Version : 00
 BaseBand CPU Bootloader Version : 00
 ----------------------------------------------------
 INT RAM: 256 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (466Gb+16384Mb) SAMSUNG 0x524836344d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010052483634 : 000000000000000000
 EMMC UA SIZE: 0xe8f800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe90400000      [58.254 GB]
 Preloader SEC version: 0
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : DA USB VCOM Port (COM70)
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xd1000000        length: 0x10000000     
 Partition: userdata  begin: 0xe1000000        length: 0xdad7fbe00     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

maanarman · Sep 7, 2018

Infinix X553 Read FF done

Code:

Operation    : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info    : ZTE Corporation, zghsser.sys, 5.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1B09100 [8929] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8929_001.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8929, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA    : Normal
Reading Device Information...OK
Device    : unknown MSM8916 for arm64 [msm8916]
Software    : X553-W82918-A1-L-S004-20151013, X553-W82918-A1-L-S004-20151013 [Tue Oct 13 22:51:31 CST 2015]
Android Ver.    : 5.1.1
Reading [modem]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [hyp]...Done
Reading [hypbak]...Done
Reading [misc]...Done
Reading [splash]...Done
Reading [sec]...Done
Reading [boot]...Done
Reading [system]...Done
Reading [persist]...Done
Reading [cache]...Done
Reading [recovery]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to    : C:\Users\test\Desktop\TEMP\unknown_MSM8916 for arm64_X553-W82918-A1-L-S004-20151013\
Operation Finished.
Module Ver. 2.6

maanarman · Sep 8, 2018

Logs

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6752
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+16384Mb) SAMSUNG 0x523758314d42
 EMMC FW VERSION: 09:00:00:00:00:00:00:00
 EMMC CID: 150100523758314D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: LRX21M
 Display ID: A7000-a_S153_151127_ROW
 Version: 5.0
 Build Date: Fri Nov 27 13:33:33 CST 2015
 Model: Lenovo A7000-a
 Brand: Lenovo
 Device: A7000-a
 Region: US
 Mediatek Version Release: ALPS.L0.MP6.V3_LENOVO6752.LWT.L_P261
 Sw Internal Version: A7000-a_USR_S153_1511271321_MP6.V3_LENOVO6752_BMAIN_ROW
 IMEI[1]: 867930028712552
 IMEI[2]: 867930028712560
 Wait untill phone will start charging.
 All done.

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Read Pattern
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6752
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+16384Mb) SAMSUNG 0x523758314d42
 EMMC FW VERSION: 09:00:00:00:00:00:00:00
 EMMC CID: 150100523758314D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 7415369
 **************************************
 Pattern HEX: F56A6DF0A85F5B0EB1E661B5836ED423542AFA86
 **************************************
 Wait untill phone will start charging.
 All done.

maanarman · Sep 9, 2018

Samsung J700h Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
 EMMC FW VERSION: 58:00:00:00:00:00:00:00
 EMMC CID: 7001004D4D43303447 : 00000000000000
 EMMC UA SIZE: 0xe6800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe6c20000       [3.606 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: 2015年 12月 11日 星期五 11:27:04 CST
 Model:
 Brand: alps
 Device: tangxun6572_we_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2.8_TANGXUN6572.WE.L
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x880000       
 Start processing MBR
 Reading:  BEGIN: 0x880000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x900000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x980000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355287904466459
 IMEI[2] from NVRAM: 355287904466467
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1180000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1b80000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3200000        - LEN: 0x40000         
 Start processing FRP ......
 Reading:  BEGIN: 0x32c0000        - LEN: 0x100000       
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x36c0000        - LEN: 0x200           
 Start processing system
 Reading:  BEGIN: 0x4140000        - LEN: 0x4b000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_alps__5_1_ALPS_L1_MP6_V2_8_TANGXUN6572_WE_L(2018_09_09_15_34)
 Wait untill phone will start charging.
 All done.

maanarman · Sep 10, 2018

OALE X1 WRITE FF DONE

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
 EMMC FW VERSION: a4:00:00:00:00:00:00:00
 EMMC CID: 90014A483847346132 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: LMY47I
 Display ID: Z6U190HF_YT_V006En
 Version: 5.1
 Build Date: Wed Jul 19 11:37:34 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 IMEI[1]: 354741100417618
 IMEI[2]: 354741100417626
 Wait untill phone will start charging.
 All done.


 Flash files count is :7
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
 EMMC FW VERSION: a4:00:00:00:00:00:00:00
 EMMC CID: 90014A483847346132 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Sep 12, 2018

LOGS

Code:

 Action : Boot Info.
 Selected Motorola:XT1754
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NRD90M.054
 Display ID: NRD90M.054
 Version: 7.0
 Build Date: 2017年 07月 28日 星期五 11:37:01 CST
 Sw Internal Version: SW_S98736BA1_V054_M11_SI_Lenovo_EM_USR_MP
 Model: Moto C
 Brand: motorola
 Device: namath
 Mediatek Version Release: alps-mp-n0.mp1-V1.0.2_wt6737m.35.n_P69
 IMEI[1]: 355630086127136
 IMEI[2]: 355630086127144
 Wait untill phone will start charging.
 All done.

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: XT1754
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Sep 14, 2018

Logs

Code:

 Flash files count is :2
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MTK USB Port (COM3)
 Boot mode: Brom
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : FE
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 39:00:00:00:00:00:00:00
 EMMC CID: 880103455042313030 : 00000000000000
 EMMC UA SIZE: 0x1ce100000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1ced00000      [7.231 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Sep 14, 2018

Logs

Code:

Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 768 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+6144Mb) SAMSUNG 0x464a32374d42
 EMMC FW VERSION: 02:00:00:00:00:00:00:00
 EMMC CID: 150100464A32374D42 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: LMY47I
 Display ID: ALPS.L1.MP6.V2_TINNO6580.WE.L
 Version: 5.1
 Build Date: Tue Aug  4 15:42:19 CST 2015
 Model: QMobile i6i
 Brand: QMobile
 Device: QMobile
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_TINNO6580.WE.L
 IMEI[1]: 354242073975054
 IMEI[2]: 354242078975059
 Wait untill phone will start charging.
 All done.

Code:

 Flash files count is :9
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 768 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+6144Mb) SAMSUNG 0x464a32374d42
 EMMC FW VERSION: 02:00:00:00:00:00:00:00
 EMMC CID: 150100464A32374D42 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

Post Here Successfully Unlocked/calculated/flashed/repaired Phones Via Nck Dongle

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview