Legitunlocks.com
We Plot for you

Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953] [mido]
Software : MMB29M, V8.2.10.0.MCFMIDL [Fri Jun 2 20:53:58 WIB 2017]
Android Ver. : 6.0.1
Patch Level : 2017-05-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
 
N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : INFINIX MOBILITY LIMITED Infinix X573 [Infinix-X573]
Software : X573-QL1668DEF-O-IN-180607V34, DEF-IN-180607V34 [Thu Jun 7 16:28:08 CST 2018]
Android Ver. : 8.0.0
Patch Level : 2018-05-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7
 
N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : INFINIX MOBILITY LIMITED Infinix X622 [Infinix-X622]
Software : X622-QL1818DF-O-IN-190611V68, DF-190611V68 [Tue Jun 11 16:03:55 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-05-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.6
 
N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : INFINIX MOBILITY LIMITED Infinix X622 [Infinix-X622]
Software : X622-QL1818DF-O-IN-190611V68, DF-190611V68 [Tue Jun 11 16:03:55 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-05-05
Formatting userdata [SafeMode]...Done
Operation Finished.
QcFire Ver. 4.6
 
N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953] [mido]
Software : AL1512-mido-build-20190128095656, V10.2.3.0.NCFMIXM [Mon Jan 28 09:56:54 WIB 2019]
Android Ver. : 7.0
Patch Level : 2018-12-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.6
 
N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953] [mido]
Software : AL1512-mido-build-20190128095656, V10.2.3.0.NCFMIXM [Mon Jan 28 09:56:54 WIB 2019]
Android Ver. : 7.0
Patch Level : 2018-12-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.6
 
N

niloy2007

Friend's Martview
Aug 14, 2019
319
4
kaliyaganj ,india
Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM15 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J200G
IMEI: 358974088835198
Software: J200GDCU2ARD2/J200GODD2ARC1/J200GDDU2ARD2/J200GDCU2ARD2
Init Download Mode... OK
Port: COM4 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:03
[Ultimate Samsung Flasher v1.5]
 
F

Forum Supporter

Friend's Martview
Jan 31, 2017
3,189
6,449
Martview
Xiaomi Redmi Note 4 Flashing Done For Hang On Logo




​
 
  • Like
Reactions: Neerajjmt
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
Remove FRP SamsunG N920K in adb mode

[url=https://www.0zz0.com]
[/URL]

Code: 
Device:
Operation: Reset FRP
Searching for Device... Found
Model: SM-N920K
Baseband: N920KKKU2DRG1
Bootloader: N920KKKU2DRG3
PDA: N920KKKU2DRG3
Android Version: 7.0
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:11
[Ultimate Samsung Flasher v1.4]

Br-PeraTa
 
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
Remove CompTe SamsunG G925A U7 Done

1-falsh phone with firmware combination
2-make remove reset compte samsung by utm
3-after falsh phone with firmware complet

[url=https://www.0zz0.com]
[/URL]

Code: 
Device: Any Samsung
Operation: Reset FRP / RL / EE
Port: COM66 : SAMSUNG Mobile USB Modem #35
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Software: FA50_G925AUCU7ARA1/FA50_G925AUCUX7ARA1/G925AUCU7ARA1/FA50_G925AUCU7ARA1
Init Download Mode... OK
Port: COM44 : SAMSUNG Mobile USB Modem #6
Reading Data from Phone... Done
Chipset: LSI7420 [HiSpeed]
Resetting Samsung Account (R/L) Data... Done
Elapsed Time: 00:59
[Ultimate Samsung Flasher v1.4]

Br-PeraTa
 
  • Like
Reactions: alexboxcell and pramod111973
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
Remove FRP One plus 3

[url=https://www.0zz0.com]
[/URL]

Code: 
Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info    : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1709400 [8996] B93D702A
OPK_DATA    : 904DA9E6B158B218AA3E8F634004F5F11EB85C01FBA4D18DF92A2AFEB346E345
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_005]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, 64 GB
LU Count    : 6 [0x00D7D800] [0x00000400] [0x00000400] [0x00008000] [0x00100000] [0x00060000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : OnePlus [OnePlus3]
Software    : , 1906252002 [Tue Jun 25 20:10:57 CST 2019]
Android Ver.    : 9
Patch Level    : 2019-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.7

Br-PeraTa
 
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
whrite firmware OPPO A37F hang logo done

[url=https://www.0zz0.com]
[/URL]

Code: 
Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.1.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8916, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [ddr.img] -> [DDR] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
[PROTECTIVE_FLASH] Skipping [dynamic_nvbk.bin] -> [oppodycnvbk]
[PROTECTIVE_FLASH] Skipping [static_nvbk.bin] -> [oppostanvbk]
Writing [logo.bin] -> [LOGO] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system.img ] -> [system]...Done
Writing [cache.img ] -> [cache]...Done
Writing [persist.img ] -> [persist]...Done
Writing [DRIVER.ISO] -> [DRIVER] ...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0_partition_MSM_15399.xml.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 4.7

Br-PeraTa
 
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
Unlock Bootloader XIaomi Redmi NoTe 5

[url=https://www.0zz0.com]
[/URL]

Code: 
Operation    : Bootloader Unlock/Relock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info    : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1C00C00 [8996] 00000000
OPK_DATA    : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, eMMC, 32 GB
LU Count    : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 5 [whyred]
Software    : OPM1.171019.011, V10.3.1.0.OEIMIXM [Fri Apr 26 15:54:32 WIB 2019]
Android Ver.    : 8.1.0
Patch Level    : 2019-04-01
Reading Data...Done
Bootloader    : Locked
Preparing Data...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 4.7

Br-PeraTa
 
  • Like
Reactions: badie1983
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
Remove FRP MoTorola MoTo G4 XT1644

[url=https://www.0zz0.com]
[/URL]

Code: 
Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1644
Boot Ver.    : moto-msm8952-B1.09
Baseband    : M8952_70030.25.03.77R ATHENE_RETUSA_CUST
Software    : Blur_Version.28.11.26.athene.retail.en.US
IMEI    : 354113070972735
CPU    : MSM8952
RAM    : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
EMMC    : 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (4)
Bootloader    : 0xB109
Baseband    : M8952_70030.25.03.77R ATHENE_RETUSA_CUST
Build    : Blur_Version.28.11.26.athene.retail.en.US
Android    : 8.1.0
Searching Network Interface... Found
Connecting to device... OK
Model    : Moto G (4)
Bootloader    : 0xB109
Baseband    : M8952_70030.25.03.77R ATHENE_RETUSA_CUST
Build    : Blur_Version.28.11.26.athene.retail.en.US
Android    : 8.1.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 14:19
[Module Ver. 5.3]
Log Saved to Logs\190921_141548.log

Br-PeraTa
 
  • Like
Reactions: badie1983
perata

perata

Friend's Martview
Dec 21, 2016
1,817
1,509
morocco
Remove FRP One Plus OnePlus5T

[url=https://www.0zz0.com]
[/URL]

Code: 
Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM28)
Driver Info    : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1E00500 [8998] DB41702A
OPK_DATA    : 8EF1BA9BCEF942981995FE1BCAFDD191A636A0590E64C211AD74CC849534857A
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8998_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, 64 GB
LU Count    : 6 [0x00D7D800] [0x00000400] [0x00000400] [0x00008000] [0x00100000] [0x00060000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : OnePlus [OnePlus5T]
Software    : , 1907311828 [Wed Jul 31 18:37:42 CST 2019]
Android Ver.    : 9
Patch Level    : 2019-08-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.7

Br-PeraTa
 
  • Like
Reactions: badie1983
You must log in or register to reply here.
Top