Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

Forum Supporter

Friend's Martview
Jan 31, 2017
3,189
6,449
Martview
MICROMAX Q415 PATTERN & FRP RESET DONE BY UMT




 

sultan552

Junior Member
Jun 30, 2019
3
0
Operation : Multi Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00800 [SDM845] 00007200
OPK_DATA : 99AF649E077EBCE3E9E187442ABDC70BD715756DE9ED192E9F7883A10EBE09F4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM845]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...OK
Blob : NDE1MTQxNDE0MTQ1NDU0MjQxNDE0NDQxNEM0QTQ1NkE2RDU0NjE0QjM3NjY2QjZGMzk1Mzc5Mzk3OTU4NUE2OTMyNDc1RjU5NzY1MT==
Requesting UMT Server for Auth Data...OK
Credits Left: 0

Authenticating...OK
Detecting Chip Type...OK
Hardware : SDM845, UFS, 128 GB
LU Count : 6 [0x01CA5800] [0x00000800] [0x00000800] [0x00002000] [0x00120000] [0x00002000]
Payload Info : In: 262144 [65536], Out: 1048576, Sector Size: 4096
Processing [rawprogram0.xml]
Writing [dummy.img] -> [switch] ...Done
Writing [misc.img] -> [misc] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl_config.img] -> [xbl_config_a] ...Done
Writing [xbl.img] -> [xbl_a] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl_config.img] -> [xbl_config_b] ...Done
Writing [xbl.img] -> [xbl_b] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [dummy.img] -> [limits] ...Done
Writing [qupfw.img] -> [qupfw_a] ...Done
Writing [qupfw.img] -> [qupfw_b] ...Done
Writing [storsec.img] -> [storsec_a] ...Done
Writing [storsec.img] -> [storsec_b] ...Done
Writing [devcfg.img] -> [devcfg_a] ...Done
Writing [devcfg.img] -> [devcfg_b] ...Done
Writing [aop.img] -> [aop_a] ...Done
Writing [aop.img] -> [aop_b] ...Done
Writing [cmnlib.img] -> [cmnlib_a] ...Done
Writing [cmnlib.img] -> [cmnlib_b] ...Done
Writing [cmnlib64.img] -> [cmnlib64_a] ...Done
Writing [cmnlib64.img] -> [cmnlib64_b] ...Done
Writing [keymaster.img] -> [keymaster_a] ...Done
Writing [keymaster.img] -> [keymaster_b] ...Done
Writing [bluetooth.img] -> [bluetooth] ...Done
Writing [hyp.img] -> [hyp_a] ...Done
Writing [hyp.img] -> [hyp_b] ...Done
Writing [abl.img] -> [abl_a] ...Done
Writing [abl.img] -> [abl_b] ...Done
Writing [tz.img] -> [tz_a] ...Done
Writing [tz.img] -> [tz_b] ...Done
Writing [logo.img] -> [logo] ...Done
Writing [dsp.img] -> [dsp] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [modem.img] -> [modem] ...Done
Writing [vendor.img ] -> [vendor]...Done
Writing [system.img ] -> [system]...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [imagefv.elf] -> [ImageFv] ...Done
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 5.6

MI 8 FLASHING AUTHORIZED ACCOUNT XIAOMI
 

perata

Friend's Martview
Dec 21, 2016
1,778
1,469
morocco


• Remove FRP WIKO TOMMY 2 7.1.1



Code:
Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1009600 [8909] 05770000
OPK_DATA    : FD40BBCA56D6976B0F75F3FED2267721F5AE7166CE06C2F0C237334FFA38A8DC
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_055]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8909, eMMC, 8 GB
LU Count    : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : WIKO TOMMY2 [msm8909] [TOMMY2]
Software    : NMF26F release-keys, eng.android.1499184762 [Wed Jul  5 00:54:24 CST 2017]
Android Ver.    : 7.1.1
Patch Level    : 2017-07-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 5.6
Failed to save log!
 

gsmanees

Active Member
Aug 21, 2019
52
32
INDIA
Oppo A37 pattern reading done

Operation : Read Pattern Lock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
USERDATA : Normal
Reading Pattern Data...Done
Pattern : 42568
Operation Finished.
QcFire Ver. 5.6
 

kabirsoft

Active Member
Oct 4, 2019
62
16
vivo y19 /1915 frp reset
Operation : Factory Reset (New)
Checking for existing META ports...
Found MediaTek USB VCOM (Android) (COM16) on COM16
Device Path : usb\vid_0e8d&pid_2007&rev_????
Configuring Communication Channel...
Reading phone information...
CPU : MT6768
SW Ver. : MOLY.LR12A.R3.MP.V57.P97
HW Ver. : BBK_P0MP3_K68V1_64_BSP_HW
Starting Factory Reset...
Reset success
Operation finished
[UltimateMTK Ver. 3.0]
 

kabirsoft

Active Member
Oct 4, 2019
62
16
J510FN frp remove
Brand : Samsung
Model : J510FN
Operation : Reset FRP
Searching for Phone...Found
Port: : COM11 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MSM8916 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5b
 
Top