HOT Qualcomm Android 15 Hyper2 – Working DIAG Codes (Tested & Confirmed)

[.::Greed::.]

Qualcomm Android 15 Hyper2 – Working DIAG Codes ( Tested & Confirmed )​

---

Tested DIAG Codes

Here are the codes that are currently being used to enable DIAG mode:

• *#*#663368378#*#*
• *#*#68276278#*#*
• *#*#663364636#*#*
• *#*#73694364#*#*
• *#*#717#*#*
• *#*#686564#*#*
• *#*#24744625#*#*

What Happens When You Use These?

Once the code is accepted:

• The Qualcomm DIAG port is turned on.
• You can connect your phone to a PC and open tools like QPST, QFIL, or EFS Explorer.
• This gives you access to NV items, modem settings, and in some cases, IMEI functions.

It’s especially helpful for people doing:

• FRP unlocks
• Modem backup/restore
• IMEI repair (on supported tools)
• Network config work

How To Use (Real-World Steps)

1. Open the phone app (dialer)
2. Type in one of the codes
3. Nothing will pop up, but that’s normal
4. Connect your phone via USB to your PC
5. Launch your Qualcomm tool
6. If it shows DIAG mode or COM port — you're in

No root, no bootloader unlock, and most importantly — no test point or EDL required.

Keep In Mind

• Some phones won’t respond — depends on the brand and software version.
• Always back up EFS or NV data before doing anything in DIAG mode.
• Don’t randomly write values — one wrong setting can cause signal/network loss.
• On some models, DIAG might disable again after reboot.

---

If you find my post helpful, press like button✌​