UMT READ PARTITION TABLE FAILED PLZ HELP

UMT Box

ludashi

Active Member
Dec 12, 2020
16
0
spain
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM5 [MediaTek USB Port (COM5)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&3269d8ea&0&1#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0813, [MT6785] [Helio G90]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_begonia_211103_203203.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
Syncing with Target...
Reading Partition Table...
Failed! Please retry or update drivers!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]

SOMEONE CAN HELP PLZ
PS. I HAVE ALLREADY REINSTALLED DRIVER
 

ludashi

Active Member
Dec 12, 2020
16
0
spain
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM5 [MediaTek USB Port (COM5)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&3269d8ea&0&1#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0813, [MT6785] [Helio G90]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_begonia_211105_143255.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : UFS
Reading Information...
Could not read specified bytes.
Could not read specified bytes.
-- Could not read!
Could not read specified bytes.
Could not read specified bytes.
Could not read specified bytes.
Userdata is ENCRYPTED
Erasing Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]


GOOGLE PROTECTION STILL HERE
SOMEONE CAN HELP ME PLZ
 

vjupan

Junior Member
Jun 30, 2022
1
0
ahmedabad
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM5 [MediaTek USB Port (COM5)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&3269d8ea&0&1#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0813, [MT6785] [Helio G90]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
Preparing device...
-- Success!
Preloader saved as : preloader_begonia_211105_143255.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : UFS
Reading Information...
Could not read specified bytes.
Could not read specified bytes.
-- Could not read!
Could not read specified bytes.
Could not read specified bytes.
Could not read specified bytes.
Userdata is ENCRYPTED
Erasing Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.5]


GOOGLE PROTECTION STILL HERE
SOMEONE CAN HELP ME PLZ
have you find any solution??
 
Top