REAL ME RMX 1911 AFTER PATTERN AND FRP PROBLEM

[cellbhai]

REAL ME RMX 1911 PATTERN AND FRP DONE,BUT SET NOT ON,BYPASS CLK RESISTANCE ALSO,NOT SWITCH ON
HERE LOG
[ Open \\ISP Pinout picture ]
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x1126C833
Manufacturing date: Jun 2019
CID: 13014E53 304A394B 39101126 C8336616
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\S0J9K9_1126C833.ext_csd"
ANDROID System Info:
platform: trinket, cpu abi: arm64-v8a
manufacturer: realme
board: trinket, name: RMX1911
brand: realme, model: RMX1911
build model list: RMX1925, RMX1911
build id: PKQ1.190616.001, version: 9 Pie (RMX1911EX_11_A.12)
build description: trinket-user 9 PKQ1.190616.001 eng.root.20190829.040048 release-keys
crypto state: encrypted?
crypto state: encrypted?
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x1126C833
Manufacturing date: Jun 2019
CID: 13014E53 304A394B 39101126 C8336616
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
MasterClear [1]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x1126C833
Manufacturing date: Jun 2019
CID: 13014E53 304A394B 39101126 C8336616
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
MasterClear [5]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x1126C833
Manufacturing date: Jun 2019
CID: 13014E53 304A394B 39101126 C8336616
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Clear FRP Lock... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K9 (0x53304a394b39), rev: 0x10, serial number: 0x1126C833
Manufacturing date: Jun 2019
CID: 13014E53 304A394B 39101126 C8336616
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: trinket, cpu abi: arm64-v8a
manufacturer: realme
board: trinket, name: RMX1911
brand: realme, model: RMX1911
build model list: RMX1925, RMX1911
build id: PKQ1.190616.001, version: 9 Pie (RMX1911EX_11_A.12)
build description: trinket-user 9 PKQ1.190616.001 eng.root.20190829.040048 release-keys
crypto state: encrypted?
crypto state: encrypted?
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
UFI software version: 1.4.0.1502

 

[usedmobilenpc]

so have you fixed the phone? did u find the reason?
wbr

Sent from my SM-C7000 using Tapatalk

 

[abe05]

be careful and always use anti static when solder sensitive points, may be its has short to ground. check capacitors also

 

[cellbhai]

I chek on off switch supply,it is 1.38v only,other working set 3.8v coming any bodies have circuit to bypass