UMT Realme 8 pro

[jakeka]

Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB Diagnostics 9006 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00005100
OPK_DATA : 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [SM6250_001]...Write Error!
Please use correct loader and check USB port / cable.
Operation Failed.
QcFire Ver. 7.4

HI team which is correct loader ? Realme RMX3081

 

[aftab_ansari5287]

Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB Diagnostics 9006 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00005100
OPK_DATA : 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [SM6250_001]...Write Error!
Please use correct loader and check USB port / cable.
Operation Failed.
QcFire Ver. 7.4

HI team which is correct loader ? Realme RMX3081

You are booting on Qualcomm HS-USB diagnostics 9006 port . which is not correct
you have to boot on Qualcomm HS-USB QDLoader 9008 port

 

[quimera40]

Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB Diagnostics 9006 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00005100
OPK_DATA : 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [SM6250_001]...Write Error!
Please use correct loader and check USB port / cable.
Operation Failed.
QcFire Ver. 7.4

HI team which is correct loader ? Realme RMX3081

OPK_DATA: 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8

hash not supported

 

[jakeka]

Still nothing ?(



Device : Realme 8 Pro (RMX3081)


Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00005100
OPK_DATA : 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [SM6250_001]...Error
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 8.1

 

[jakeka]

HI ..

Is Realme 8 pro .

Support ready ¿

 

[zashish5213]

Re

Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB Diagnostics 9006 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00005100
OPK_DATA : 8928DD4BCB26CA67BC34A1BA4BA502841B20B4A1727FC96D525EDB04BD50C1F8
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [SM6250_001]...Write Error!
Please use correct loader and check USB port / cable.
Operation Failed.
QcFire Ver. 7.4

HI team which is correct loader ?

 

[ffhnow]

hi friends any solution for this model ???

br