Device found at COM17 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x6B3829DA, 0x73D4806E, 0x0A3CDCA2, 0xEF61F84B
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GAXAU2U22
UFS_FWVER : 0107
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3612
Product Name : RMX3612
Product Device : RE588DL1
Product Board : k6833v1_64_k419
Board Platform : mt6833
Build ID : UKQ1.230924.001
Build Date : Mon Dec 2 22:04:01 CST 2024
Display ID : RMX3612_14.0.0.1100(EX01)
Security Patch : 2024-12-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : S.1b4b85c_3f75
Userdata FS Type : F2FS
Read super info... OK
Prepare list for upgrade... OK
Checking upgrade list... OK
Prepare format list... OK
Prepare final partition list... OK
Read partition "preloader"... OK
Read partition "oplusreserve1"... OK
Read partition "oplusreserve2"... OK
Read partition "oplusreserve3"... OK
Read partition "oplus_custom"... OK
Read partition "nvcfg"... OK
Read partition "persist"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "ocdt"... OK
Read partition "oplusreserve5"... OK
Read partition "oplusreserve6"... OK
Read partition "param"... OK
Verify checksum... OK
Format "UFS_LU2" partition( 0x00008000..0x00107FFF )... OK
Format "UFS_LU2" partition( 0x0CA08000..0x0F307FFF )... OK
Format "UFS_LU2" partition( 0x11308000..0x1A307FFF )... OK
Format "UFS_LU2" partition( 0x1E800000..0x3A6FFFFF )... OK
Format "UFS_LU2" partition( 0x45300000..0x1DC9FF7FFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK "preloder_backup"... OK
Download "oplusreserve2"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "pi_img_a"... OK
Download "dpm_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "mcupm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "cdt_engineering_a"... OK
Download "logo"... OK
Download "splash_odm"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!
Selected model: Realme RMX3612 (Realme 9i 5G)
Software version: 8.9