1st try diag mode and format phone
Card found : 9122DACB , v0152
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Wipe failed!
>>> INFO : FRP reset require FlashMode!
Reconnect Power/Cable!
Done!
Elapsed: 00:00:23
-----------------------------------------------------
wipe failed but phone complete formate.....
THEN TRY FRP (1ST LOAD FIRMWARE)
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Wipe failed!
>>> INFO : FRP reset require FlashMode!
Reconnect Power/Cable!
Done!
Elapsed: 00:00:30
Open : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
VER : BP_R2.0.1
LEN : 10.01 GiB
CPU : ums9230_nico
VER : MocorDroidR
Reading package ...
Read package finished!
Product Brand : realme
Product Device : ums9230_nico
Product Model : RMX3511
Product Name : ums9230_nico_Natv
Patch Level : RP1A.201005.001
Display ID : RMX3511PU_11_A.53
SW OTA Version : RMX3511PU_11.A.53_0530_202208301607
Ver. Incmt : 1333
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-08-05
Build Time : 30.08.2022
Product Info : ums9230_nico
Product Device : RE87BAL1
Product Board : ums9230_nico
Board Platform : ums9230
Product Manfct : realme
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:15
then info
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Wipe failed!
>>> INFO : FRP reset require FlashMode!
Reconnect Power/Cable!
Done!
Elapsed: 00:00:30
Open : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
VER : BP_R2.0.1
LEN : 10.01 GiB
CPU : ums9230_nico
VER : MocorDroidR
Reading package ...
Read package finished!
Product Brand : realme
Product Device : ums9230_nico
Product Model : RMX3511
Product Name : ums9230_nico_Natv
Patch Level : RP1A.201005.001
Display ID : RMX3511PU_11_A.53
SW OTA Version : RMX3511PU_11.A.53_0530_202208301607
Ver. Incmt : 1333
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-08-05
Build Time : 30.08.2022
Product Info : ums9230_nico
Product Device : RE87BAL1
Product Board : ums9230_nico
Board Platform : ums9230
Product Manfct : realme
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:15
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : realme
Product Device : ums9230_nico
Product Model : RMX3511
Product Name : ums9230_nico_Natv
Patch Level : RP1A.201005.001
Display ID : RMX3511PU_11_A.33
SW OTA Version : RMX3511PU_11.A.33_0330_202206092304
Ver. Incmt : 927
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-05-05
Build Time : 09.06.2022
Product Info : ums9230_nico
Product Device : RE87BAL1
Product Board : ums9230_nico
Board Platform : ums9230
Product Manfct : realme
USERDATA : FILESYSTEM : F2FS
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:01:06
thanks infinity team
Card found : 9122DACB , v0152
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Wipe failed!
>>> INFO : FRP reset require FlashMode!
Reconnect Power/Cable!
Done!
Elapsed: 00:00:23
-----------------------------------------------------
wipe failed but phone complete formate.....
THEN TRY FRP (1ST LOAD FIRMWARE)
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Wipe failed!
>>> INFO : FRP reset require FlashMode!
Reconnect Power/Cable!
Done!
Elapsed: 00:00:30
Open : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
VER : BP_R2.0.1
LEN : 10.01 GiB
CPU : ums9230_nico
VER : MocorDroidR
Reading package ...
Read package finished!
Product Brand : realme
Product Device : ums9230_nico
Product Model : RMX3511
Product Name : ums9230_nico_Natv
Patch Level : RP1A.201005.001
Display ID : RMX3511PU_11_A.53
SW OTA Version : RMX3511PU_11.A.53_0530_202208301607
Ver. Incmt : 1333
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-08-05
Build Time : 30.08.2022
Product Info : ums9230_nico
Product Device : RE87BAL1
Product Board : ums9230_nico
Board Platform : ums9230
Product Manfct : realme
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:15
then info
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Wipe failed!
>>> INFO : FRP reset require FlashMode!
Reconnect Power/Cable!
Done!
Elapsed: 00:00:30
Open : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
VER : BP_R2.0.1
LEN : 10.01 GiB
CPU : ums9230_nico
VER : MocorDroidR
Reading package ...
Read package finished!
Product Brand : realme
Product Device : ums9230_nico
Product Model : RMX3511
Product Name : ums9230_nico_Natv
Patch Level : RP1A.201005.001
Display ID : RMX3511PU_11_A.53
SW OTA Version : RMX3511PU_11.A.53_0530_202208301607
Ver. Incmt : 1333
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-08-05
Build Time : 30.08.2022
Product Info : ums9230_nico
Product Device : RE87BAL1
Product Board : ums9230_nico
Board Platform : ums9230
Product Manfct : realme
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:15
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_nicky_Natv-user-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : realme
Product Device : ums9230_nico
Product Model : RMX3511
Product Name : ums9230_nico_Natv
Patch Level : RP1A.201005.001
Display ID : RMX3511PU_11_A.33
SW OTA Version : RMX3511PU_11.A.33_0330_202206092304
Ver. Incmt : 927
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-05-05
Build Time : 09.06.2022
Product Info : ums9230_nico
Product Device : RE87BAL1
Product Board : ums9230_nico
Board Platform : ums9230
Product Manfct : realme
USERDATA : FILESYSTEM : F2FS
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:01:06
thanks infinity team
