Legitunlocks.com
Microscope Full Range

MRT redmi 6 frp not done

MRT Team
W

waelkawasaki

Member
Nov 29, 2018
12
2
hi sir

redmi 6 frp not done in MRT 3.77

flashing ok
erase Account ok
but FRP not done


Disconnect Mobile...
re-input Mobile Battery...
then connect usb to computer....
Make Sure your Mobie have power...
>>> Searching Mobile Com Port...
Get Mobile Port: COM21
>>> Driver Identifying name:
MediaTek USB Port
>>> Get Mobile Aleady...
CPU_NAME: MT6765
>>> Reading Mobile Hardware info...Success
HW_Inf: 8A00 SW_Inf: CA00
>>> Initializing Mobile Phone...>>> Sending AUTH file...>>>>try get devices info...
MediaTek USB Port
VID: 0x0E8D PID: 0x0003
Success
>>> Downloading boot1 to Mobile...Success
ÊÖ»ú״̬:SYNC...
ÊÖ»ú״̬Çл»Îª :brom...³É¹¦
È·ÈÏÊÖ»ú״̬Ϊ :brom...
Initializationing BOOT2 ...
=====================Flash ÀàÐÍ(eMMC)==============
Flash Size: 0x0000000E8F800000 -> 59640M
Flash ID: 0x150100475036424D
Flash Name: Samsung_Unknow
Flash Code: GP6BMB
>>> Reading Mobile GPT data...Success
all is done!!!
 
  • Like
Reactions: netichakhan
alfred gsm

alfred gsm

Active Member
Nov 23, 2020
60
41
indonesia
waelkawasaki said:
hi sir

redmi 6 frp not done in MRT 3.77

flashing ok
erase Account ok
but FRP not done


Disconnect Mobile...
re-input Mobile Battery...
then connect usb to computer....
Make Sure your Mobie have power...
>>> Searching Mobile Com Port...
Get Mobile Port: COM21
>>> Driver Identifying name:
MediaTek USB Port
>>> Get Mobile Aleady...
CPU_NAME: MT6765
>>> Reading Mobile Hardware info...Success
HW_Inf: 8A00 SW_Inf: CA00
>>> Initializing Mobile Phone...>>> Sending AUTH file...>>>>try get devices info...
MediaTek USB Port
VID: 0x0E8D PID: 0x0003
Success
>>> Downloading boot1 to Mobile...Success
ÊÖ»ú״̬:SYNC...
ÊÖ»ú״̬Çл»Îª :brom...³É¹¦
È·ÈÏÊÖ»ú״̬Ϊ :brom...
Initializationing BOOT2 ...
=====================Flash ÀàÐÍ(eMMC)==============
Flash Size: 0x0000000E8F800000 -> 59640M
Flash ID: 0x150100475036424D
Flash Name: Samsung_Unknow
Flash Code: GP6BMB
>>> Reading Mobile GPT data...Success
all is done!!!
Click to expand...
Try this way
 
  • Like
Reactions: waelkawasaki
W

waelkawasaki

Member
Nov 29, 2018
12
2
alfred gsm said:
Try this way
Click to expand...
not worke


>>>>Seaching Android FastBoot Devices...
Get the Android Deivers
...
FAILED (remote: unknown command)
finished. total time: -0.000s
Corresponding operation completed!!!
>>>>Seaching Android FastBoot Devices...
Get the Android Deivers
usage: fastboot [ <option> ] <command>

commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
flashing lock locks the device. Prevents flashing
partitions
unlocks the device. Allows user to
flash any partition except the ones
that are related to bootloader
flashing bootloader related
partitions
flashing unlock_critical Enables flashing bootloader related
partitions
Queries bootloader to see if the
device is unlocked
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce
k_bootloader <request> Issue unlock bootloader using request
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback
erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
r <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
st all connected devices
continue continue with autoboot
reboot [bootloader] reboot device, optionally into bootloader
reboot-bootloader reboot device into bootloader
help show this help message

options:
-w erase userdata and cache (and format
if supported by partition type)
do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
Corresponding operation completed!!!
>>>>Seaching Android FastBoot Devices...
Get the Android Deivers
erasing 'frp'...
FAILED (remote: not allowed in locked state)
finished. total time: 0.002s
Corresponding operation completed!!!
 
alfred gsm

alfred gsm

Active Member
Nov 23, 2020
60
41
indonesia
waelkawasaki said:
not worke


>>>>Seaching Android FastBoot Devices...
Get the Android Deivers
...
FAILED (remote: unknown command)
finished. total time: -0.000s
Corresponding operation completed!!!
>>>>Seaching Android FastBoot Devices...
Get the Android Deivers
usage: fastboot [ <option> ] <command>

commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
flashing lock locks the device. Prevents flashing
partitions
unlocks the device. Allows user to
flash any partition except the ones
that are related to bootloader
flashing bootloader related
partitions
flashing unlock_critical Enables flashing bootloader related
partitions
Queries bootloader to see if the
device is unlocked
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce
k_bootloader <request> Issue unlock bootloader using request
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback
erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
r <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
st all connected devices
continue continue with autoboot
reboot [bootloader] reboot device, optionally into bootloader
reboot-bootloader reboot device into bootloader
help show this help message

options:
-w erase userdata and cache (and format
if supported by partition type)
do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
Corresponding operation completed!!!
>>>>Seaching Android FastBoot Devices...
Get the Android Deivers
erasing 'frp'...
FAILED (remote: not allowed in locked state)
finished. total time: 0.002s
Corresponding operation completed!!!
Click to expand...
try to downgrade your redmi 6a ver firmware or use manual way via apk
 
  • Like
Reactions: waelkawasaki
P

Podeev

Junior Member
Mar 17, 2017
4
0
Uk
downgrade
cactus_global_images_V10.3.8.0.OCBMIXM_20191213.0000.00_8.1_global
frp not done

downgrade
cactus_global_images_V9.6.11.0.OCBMIFD_20180726.0000.00_8.1_global
frp not done again

please help
 
alfred gsm

alfred gsm

Active Member
Nov 23, 2020
60
41
indonesia
Podeev said:
downgrade
cactus_global_images_V10.3.8.0.OCBMIXM_20191213.0000.00_8.1_global
frp not done

downgrade
cactus_global_images_V9.6.11.0.OCBMIFD_20180726.0000.00_8.1_global
frp not done again

please help
Click to expand...
my be you try to flashing with china rom and after that enable usb debuging and oum lock, and riset your phone , and after that flash again with global firmware
 
You must log in or register to reply here.
Top