phone comes with mi account. connected successfully with ufi. wrote "Redmi_8A_FRP+MI_Account_Done_By-KAILASH" with persist backup.
phone becomes dead, only access via quallcomm usb mode. restoring old persist backup didn't help.
ufi always showing CLK is not connected, still can connect by ignore option. have flashed with "olivelite_global_images_V11.0.1.0.PCPMIXM_20191121.0000.00_9.0_global" firmware. still same issue. phone only detect in EDL mode.
please suggest an idea..
regards..
phone becomes dead, only access via quallcomm usb mode. restoring old persist backup didn't help.
Code:
Connection status: NUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-####
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x3AD9118F
Manufacturing date: Apr 2019
CID: 90014A68 42386150 3E033AD9 118F46D0
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8937, cpu abi: armeabi-v7a
manufacturer: Xiaomi
board: QC_Reference_Phone, name: olivelite
brand: Xiaomi, model: Redmi 8A
build model list: Redmi 8A
build id: PKQ1.190319.001, version: 9 Pie (ZQL2116-olivelite-build-20191019053120)
build description: olivelite-user 9 PKQ1.190319.001 V10.3.3.0.PCPMIXM release-keys
Internal storage: 21.87 GiB
crypto state: unencrypted
ufi always showing CLK is not connected, still can connect by ignore option. have flashed with "olivelite_global_images_V11.0.1.0.PCPMIXM_20191121.0000.00_9.0_global" firmware. still same issue. phone only detect in EDL mode.
please suggest an idea..
regards..