hi,
set condition received - dead qualcommn port 9008
what I observe -
1.connect using usb cable wihtout short edl points it shows 9008 port (com 16) at this port device not flashing in ufi android tool, umt qcfire.
2.connect using usb cable after short edl points it shows 9008 port (com 4) at this port device succefulley flash by ufi android tool and other tools.
but the problem is after flashing it stuck in qualcommn 9008 port(com16)
Tried 2nd method: ISP Pinout
erase and write full dump still stuck in 9008 port (com 16)
set condition received - dead qualcommn port 9008
what I observe -
1.connect using usb cable wihtout short edl points it shows 9008 port (com 16) at this port device not flashing in ufi android tool, umt qcfire.
2.connect using usb cable after short edl points it shows 9008 port (com 4) at this port device succefulley flash by ufi android tool and other tools.
but the problem is after flashing it stuck in qualcommn 9008 port(com16)
Tried 2nd method: ISP Pinout
erase and write full dump still stuck in 9008 port (com 16)
Code:
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x35A74A68
Manufacturing date: Feb 2017
CID: 90014A48 43473861 34A235A7 4A6824D2
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: Xiaomi
board: msm8953, name: mido
brand: xiaomi, model: Redmi Note 4
build model list: Redmi Note 4
build id: NRD90M, version: 7.0 Nougat (AL1512-mido-build-20180614204110)
build description: mido-user 7.0 NRD90M V9.6.1.0.NCFMIFD release-keys
Internal storage: 9.31 GiB
crypto state: unencrypted
Selected: [HYNIX] H9TQ52ACLTMCUR/64GB (BGA221)
after reset internal storage shows 53 gb still qualcommn 9008 port please help