Connection status: EHCI:HUB:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-9789
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Wrong wiring may results in damaged BOX or BRICK your device !!!
Don't use long wire, long wire will result in bad connections !!!
Disconnect ISP adapter from the box before soldering !!!
Make sure to use "anti static" soldering iron !!!
When internal VCC,VCCQ power is used, please use the -
external power DC 5V to the box for best performance.
--------------------------------------------------------------------------------
[ Open ISP Pinout picture ]
Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K8 (0x53304a394b38), rev: 0x10, serial number: 0x1A0AC6FB
Manufacturing date: Mar 2020
CID: 13014E53 304A394B 38101A0A C6FB37EC
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: trinket, cpu abi: arm64-v8a
manufacturer: Xiaomi
board: ginkgo, name: ginkgo
brand: xiaomi, model: Redmi Note 8
build model list: Redmi Note 8
build id: PKQ1.190616.001, version: 9 Pie (PKQ1.190616.001)
build description: ginkgo-user 9 PKQ1.190616.001 V11.0.9.0.PCOMIXM release-keys
crypto state: encrypted?
EXT_CSD backup saved to "\\%BACKUPS%\S0J9K8_1A0AC6FB.ext_csd"
Redmi note 8 UFI ISp
Interface: UFI High-Speed
Serial number: 0011-8841-9789
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Wrong wiring may results in damaged BOX or BRICK your device !!!
Don't use long wire, long wire will result in bad connections !!!
Disconnect ISP adapter from the box before soldering !!!
Make sure to use "anti static" soldering iron !!!
When internal VCC,VCCQ power is used, please use the -
external power DC 5V to the box for best performance.
--------------------------------------------------------------------------------
[ Open ISP Pinout picture ]
Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9K8 (0x53304a394b38), rev: 0x10, serial number: 0x1A0AC6FB
Manufacturing date: Mar 2020
CID: 13014E53 304A394B 38101A0A C6FB37EC
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: trinket, cpu abi: arm64-v8a
manufacturer: Xiaomi
board: ginkgo, name: ginkgo
brand: xiaomi, model: Redmi Note 8
build model list: Redmi Note 8
build id: PKQ1.190616.001, version: 9 Pie (PKQ1.190616.001)
build description: ginkgo-user 9 PKQ1.190616.001 V11.0.9.0.PCOMIXM release-keys
crypto state: encrypted?
EXT_CSD backup saved to "\\%BACKUPS%\S0J9K8_1A0AC6FB.ext_csd"
Redmi note 8 UFI ISp
